!" # $ $ $ %
Cyber Knight (RF-626u) – The Wireless 3D Joystick Quick Start Guide. Software Installation 1. Locate the bundled CD disc into your CD-ROM drive; wait for a few seconds for your computer to read the disc. 2. If your system is set up to automatically read a newly inserted CD, then the auto run program is executed and the opening screen for installation appears. Please follow the on-screen instruction to install the Rockfire USB Driver and the GameWizard step-by-step.
Operation Reference RF Receiver Button A Button D Trigger Button Button B Hat Switch Button C Button E Twisted Rudder RF Transmitter Button G Throttle Button F 1. No Calibration Required. Upon the software installation completed, there is an exclusive driver for this joystick along with the software installed in your PC.
The realistic 8-way coolie hat switch can be set as a view finder and allow you to view your surroundings from your aircraft’s cockpit in the flight simulation games. Or you may set it as the weapon control system for efficient control to category weapons in flight missions. 5. Rotary Throttle This centralized throttle has standard momentum function, which is required by flight simulation games. You may accelerate or slow down the aircraft speed by rotating this switch for efficient maneuver control.
2. Not every game requires all functioning buttons (8 buttons) on your joystick. If you find some buttons do not work inside the game, please check the game setting again. 3. The function of the joystick buttons may vary in different games. Before proceed with game setting, whatever through the GameWizard or from the OPTION inside the game, always read your game manual carefully to approach the best game setting. 4.