Instruction
1 x1 Top Panel 2 x1 Left Side Panel 4 x1 5 x1 3 x1 Right Side Panel 6 x1 Shelf Back Frame 7 x2 Drawer Face Panel 10 x2 Drawer Bottom Panel 8 x2 Drawer Left Side Panel 11 x2 Drawer Back Panel Front Frame 9 x2 Drawer Right Side Panel
A x 16 B x 16 C x 12 Dx8 0.16 x 1.18 inch Actual Size Cam Bolt Cam Lock Dowel Gx2 Fx8 Ex4 Screw 0.12 x 0.47 inch L-Shaped Metal Connector Hx2 Ix4 Actual Size Knob Screw Jx2 0.16 x 0.
1 A C C A 5 Have the back frame (5) lay flat with the holes facing up and insert cam bolts (A) and dowels (C) like the image. 3 B B 2 5 Insert cam lock with arrow pointing down. Screw the cam firmly into locked position Align the holes on the left and right side panels (2 & 3) to the cam bolts and dowels on the back frame, making sure the metal rails are facing inward, and attach them together. Insert cam locks (B) into the holes on the inner side of the side panels.
2 F F F E F E E E 4 Have the shelf (4) upside down and insert the L-Shaped metal connectors (E) and screws (F) respectively. 4 F F Align the holes of the L-Shaped metal connectors to the holes on the leg of the back frame (5) and gently screw using using screw (F) to tighten them together.
3 6 A C B F F Insert cam lock with arrow pointing down. Screw the cam firmly into locked position Insert cam bolts (A) and dowels (C) into the holes on the side panels (2 & 3). Align the holes on the front frame (6) to cam bolts, dowels, and the metal connector, and attach them together. Use screw (F) to securely tighten the front frame to the shelf, and use cam locks (B) to tighten the front frame and side panels together. Note: Make sure all cam locks are tightened.
4 A A A 1 1 B B B B J B J Insert cam lock with arrow pointing down. Screw the cam firmly into locked position Insert cam bolts (A) to the top panel (1) and have the table up on its legs like the image. Then attach the top panel to the panels and frames, and use cam locks (B) and screws (J) to tighten them together. Note: Make sure all cam locks and screws are tightened.
5 9 8 B C B C A A 7 Have the drawer face panel (7) upside down and insert cam bolts (A) and dowels (C) into the holes like the image. Attach the drawer side panels (8 & 9) to the drawer face panel by aligning the holes to the cam bolts and dowels. Use cam locks (B) to tighten them together. Note: Make sure the grooving of the drawer face and side panels are aligned. Note: Do not tighten cam locks until the bottom panel is inserted. Insert cam lock with arrow pointing down.
6 Insert the drawers by aligning the rails. Your side table is now finished. Make sure all bolts and screws are secured tightly before using. Do not sit or stand on top. Be sure to clean up any spills immediately.
