User Manual

TK/TKD/TKQ Quick Start
FCCID: ITQ-TK
IC: 3598A-TK
IMPORTANT: See Operator’s Manual for detailed safety and operating instructions.
P/N 790-XXXXA
Getting to Know Your TK/TKD/TKQ Tracking System
TK Controls Overview
Select/Log: Press to take a depth
and log the locate point.
Down Arrow: Press to scroll down
in menu. Also use to decrement
values in settings.
Up Arrow: Press to scroll up in
menu. Also use to increment values
in settings.
Menu/On/OFF: Press to enter and
exit menus. Press once to turn unit
on. Press and hold to turn unit off.
Screen Item Descriptions
1. Signal Strength: Signal strength is shown by
bars at top of display and in numeric display.
2. Roll Position: Roll angle is displayed
graphically by pointer on the clock and
numerically by the time.
3. Pitch: Direction and amount of pitch up and
down displayed in the units selected in the set
up.
4. Depth: Displays the distance from the
tracker to the beacon. This value is displayed
in the units selected in the set up.
5. Tracker Battery Status: Indicates the level of the
batteries currently installed in the tracker.
6. Time: Displays current time in 24
hour clock format.
7. Telemetry Radio: Tower indicates radio is on and
numeric value indicates the channel.
8. Bluetooth Status: Indicates that Bluetooth is
enabled and is currently in use with another device.
9. Beacon Battery Status/Beacon Type: Indicates
the status of the battery level in the beacon. Text below
indicates the type of beacon currently set in the tracker.
10. Communication Quality Graph: Indicates the
quality of signal required for good communication. Full
graph indicates excellent signal quality, while one bar
indicates poor quality as it relates to communication.
11. Beacon Temperature: Indicates the status of the
temperature graphically and numerically according to
the units setting in the menu.
12. Bubble Level: Indicates the plumb and level of the
tracker. The more level the unit the more accurate the
depth measurement.
13. Gain Status: This bar indicates the amount of gain
set in the tracker to get the signal currently displayed.
Startup Tips
Installing The Batteries TK Menus
TK/TKD/TKQ
Use four C-cell alkaline or NiMH batteries in
tracker.
To install
1. Remove battery caps.
2. Remove batteries.
3. Insert batteries as shown.
4. Install battery caps.
5. Check operation. The unit will not come on if a battery is installed
backwards.
• Press the Menu key to enter menus.
• Scroll through menu selections with arrow keys.
• Press Menu key again to go back to previous menu or exit menus mode.
Drill-To/Walkover: Toggles unit between walkover and drill-to modes.
Beacon: Handles beacon calibration, frequency settings, roll
and pitch calibration, beacon information, and the
bore-path analyzer.
Wireless: Handles the settings for telemetry radio, channel
settings, Bluetooth, tracker control, and tracker
control codes.
Settings: Set up for language, units, backlight, clock, volume,
and auto-power settings.
Logging: Settings for auto-log, creating new log, log manager,
deletion of logs, and deletion of last pipe.
System: Access to functions such as information about the
tracker, diagnostics and software updates.