User's Manual

Module Installation Instructions

And

Regulatory Approval Conditions

802.11b/g/n and 802.15.4 Module

Model No: 241083Z and 241083

FCC ID: W38-241083Z and W38-241083

IC: 8854A-241083Z and 8854A-241083

Date: 11-19-2012

Revision: 1

PAGE 1
Module Installation Instructions And Regulatory Approval Conditions 802.11b/g/n and 802.15.
PAGE 2
FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Warning: Any changes or modifications to this device not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
PAGE 3
Regulatory Approval Conditions for using 241083Z/241083 Module: 1. Antennas must have a greater distance than 20 cm separation from the transmitting antenna to the user body during normal operation condition. This device can be used with Prestta WLAN Embedded Antenna. The specification of the antenna including antenna gain is shown below. 2. If a different antenna than the original certificated antenna is being use for the final product, the host will need to consult with Coulomb Technologies Inc.
PAGE 4
Note: Model: 241083Z is under FCC ID: W38-241083Z and IC: 8854A-241083Z Model: 241083 is under FCC ID: W38-241083 and IC: 8854A-241083