User's Manual

.Key 1: press and release, the two push rods are fully retracted and then stop. During operation,

press any key to stop (except key 2)；

2. Key 2: after pressing, the flashlight light will be on, and it will be off when it is released;

3. K

ey 3: after pressing once, the light belt will light up, and then press it again to turn off;

eys 4 and 7: press and hold the key 4, the push rod h extends out and stops when it is

released; when the key 7 is pressed and held, the push rod h retracts and stops when it is

released;

eys 6 and 9: press and hold the key 6, the push rod f extends, and it stops when it is released;

when the key 9 is pressed and held, the push rod f retracts and stops when it is released;

6. Keys 5 and 8: press and hold button 5, push rods h and f extend at the same time, release to

stop; press and hold key 8, push rods h and f retract at the same time, release to stop;

eys 10, 11, 12: press and release, the push rod will stop when it reaches the preset position o

he system, and it will stop by pressing any key during operation (except for key 2);

User Manual

PAGE 1
User Manual 1.Key 1: press and release, the two push rods are fully retracted and then stop. During operation, press any key to stop (except key 2)； 2. Key 2: after pressing, the flashlight light will be on, and it will be off when it is released; 3. Key 3: after pressing once, the light belt will light up, and then press it again to turn off; 4.
PAGE 2
8. Keys 13, 14, 15: press and hold for 3 seconds, the backlight of the manual controller changes from off to on, the control box memorizes the current position of the push rod, and the previous memory position is cancelled; press once briefly, When the push rod moves to the memory position set by the key, press any key to stop (except for key 2); (the memory position must be reset before memory position) 9.