User's Manual

1.Productparameter

2. Systemconfiguration

Wirelesscharging

Compatibleprotocol

OutputPower

QI‐BPPaggreement 5W

SamsungFastChargeAgreement 10W

Inputvoltage DC29V

Protectfunction Overtemperatureprotection,FODforeignobjectdetection

Indicatorlight

instruction

1. Standbystate:theindicatorlightisnotlit

2. Chargingstatus:indicatorlightisgreen

3.If there is any abnormality such as foreign matter during

over‐temperature and wireless charging, the indicator light will

flashgreen.

USBinstruction

Maximum output 5V/2A, support USB charging and wireless

chargingatthesametime.

Workingtemperature

0‐35℃

User Manual



PAGE 1
User Manual 1.Product parameter Wireless charging Compatible protocol Output Power QI‐BPPaggreement 5W Samsung Fast Charge Agreement 10W Input voltage DC29V Protect function Over temperature protection, FOD foreign object detection Indicatorlight instruction 1. Standby state: the indicator light is not lit 2. Charging status: indicator light is green 3.If there is any abnormality such as foreign matter during over‐temperature and wireless charging, the indicator light will flash green.
PAGE 2
3.Instructions I.Provide wireless charging DC29V power supply through a dedicated power adapter. Once powered, you can start working properly. II.Put the mobile phone with wireless charging function (such as iPhone8/8plus/X, Samsung Note8/S9+, Huawei mate20Pro, etc.) into the wireless charging slot, and the charging will start automatically. When the wireless charger is in normal working condition, the LED green light is always on. III.
PAGE 3
4.Notes  Do not mix metal foreign objects between the phone and the wireless charger while charging.  In order to ensure normal charging, the thickness of the plastic or silicone mobile phone case is less than 1‐2mm. The material and thickness of the phone case can affect the normal charging function and increase the temperature of the wireless charging. If necessary, remove the phone case for wireless charging.  Do not squeeze or bump the product.  Do not disassemble or modify it by yourself.