M52Plus-2.
Content 1- Appearance Description 2-Preparation Work 3-System Connection 4-System Settings: Keypad Match, Set ID, Management 5- Voting Functions: Sign in, Vote, Choice, Sequence, Numeric, Rush Answer 6-FAQ & Notes
1- Appearance Description Model M52Plus Power On Press any key to power on Power Off Long press 【C】 till “------” appears on the screen, then release your hand to turn it off Sign In Signal Strength LCD Display Press 【OK】 to sign in, LCD will show “OK ” after successful registration Submit Vote Judge Single Choice Multiple Choice Sequence Rush Answer Cancel Press【1】【2】【3】 for yes/no/abstain, and LCD will show“OK” if successfully submit.
2-Preparation Work Please check the keypad batteries before use. If icon shows on LCD, it indicates the battery is low. Please change new CR2032 batteries.
3-System Connection 2-Connect base station Class 5, Grade I English Test 3- Set up the projector & screen 1-Install software 4-Power on keypads for testing No network connection is required in the conference hall; The projector and screen are prepared by users.
4.1.1-System Settings ：Keypad Match-Match Mode 【 Why to Match】 Keypad match is to create communication between keypads and base station, and make sure your system is isolated from other similar systems. Match mode is set by default from factory. 【 How to Match】 Please run SunVote ARS Tool Kit，go to Keypad Match and click “Start” after the base is connected. Press 【.
4.1.2-System Settings ：Keypad Match-Free Mode 【 Free Mode】 Keypad is able to communicate with any base station freely by inputting the appropriate channel of the base. 【 How to Set】 Free mode is controlled by base station. However the base is set as match mode from factory, we may change it to free mode in SunVote ARS Tool Kit as shown on the bottom left.
4.2- System Settings: Set Keypad ID 【 Why to Set ID】 Keypad ID is convenient for device management, test and troubleshooting. ID should be unique. 【 How to Set ID 】 Run SunVote ARS Tool Kit ，go to Keypad and click Start Setting. Now press and hold 【OK】 button on keypad, and release your hand after a new ID showing on keypad and toolkit. New ID in ARS Tool kit will add 1 automatically, so please press another keypad to set its ID in ascending order. For end-user, ID is set before delivery.
4.3-System Settings: Management 1. Modification Mode： Use software to allow or not allow to modify the answer. Press 【C】 to modify after submitting under modifiable mode. Press the appropriate functional buttons to resubmit directly for single choice/judge and vote; 2. Confidential Mode：Use software to enable or disable the confidential mode . Once enabled, LCD will only show “OK” without the exact voting value (i.e.. A/B/C) for confidence. 3.
5.1- Voting functions：Sign in 请按OK键签到 请按OK键签到 When start Sign in, press 【OK】 to sign in according to the indication on keypad and “OK” will be displayed after successfully submitting.
5.2- Voting functions： User-ID 请按OK键签到 请按OK键签到 When start Sign in, input numbers according to the indication on keypad and press 【OK】 to sign in. “OK” will be displayed after successfully submitting. Max support 16 numeric characters; User-ID is a group of specific numbers to bond the randomly distributed keypad with the user, such as student ID or Staff ID.
5.3- Voting functions： Back-Stage Signin 请按OK键签到 请按OK键签到 Start Signin by software, then input numbers while keypad shows “CHEC ”and press 【OK】 to sign in. LCD says “OK” after successfully submitting and goes to response interface. If input a wrong code, keypad will say “Err”, and now input a new code.
5.4- Voting functions: Single Choice 请按OK键签到 请按OK键签到 When start response, press alphanumeric keys to submit according to the indication on keypad, and “OK” will be displayed after successfully submitting. Set the confidential mode in software, and support 1 out of 10 options.
5.5- Voting functions: Multiple Choice 请按OK键签到 请按OK键签到 When start response, press alphanumeric keys to input your answer and press 【OK】 to submit according to the indication on keypad, and “OK” will be displayed after successfully submitting. Set the confidential mode in software, and support maximum 10 out of 10 options, and display the last 6 letters only.
5.6- Voting functions: Sequence 请按OK键签到 请按OK键签到 When start response, press alphanumeric keys to input your answer and press 【OK】 to submit according to the indication on keypad, and “OK” will be displayed after successfully submitting. Set the confidential mode in software, and support maximum 10 out of 10 ranking options, and display the last 6 letters only. Set submitting mode in software , such as repeated selection ( i.e. AABC).
5.7- Voting functions：Judge 请按OK键签到 请按OK键签到 When start Vote, press 【1】/【2】for Yes/No (True/False) to vote according to the indication on keypad, and “OK” will be displayed after successfully submitting.
5.8- Voting functions：Vote 请按OK键签到 请按OK键签到 When start Vote, press 【1】【2】【3】 (Yes/No/Abstain) to vote according to the indication on keypad, and “OK” will be displayed after successfully submitting. Set the confidential mode in software.
5.9- Voting functions: Numeric 请按OK键签到 请按OK键签到 When start response, press alphanumeric keys to input your answer and press 【OK】 to submit according to the indication on keypad, and “OK” will be displayed after successfully submitting. Set the confidential mode in software, and support maximum 16 characters including decimal point and minus, and display the last 6 digits only.
5.10- Voting functions: Rush Answer 请按OK键签到 请按OK键签到 When start response, press 【OK】 for fastest response, and “OK” will be displayed after successfully submitting.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
