User's Manual

ManualsBrandsChangsha SunSky Electronic Design & Development ManualsElectronicsVoting Keypad

 Keypad-M40L-ProductFunctionalSpecifications



www.sunvote.com.cn+86‐731‐851239991/6

Keypad‐M540L‐ProductFunctionalSpecifications



1. ProductAppearance



LEDlightstatusindications:

(1)Redlightflashesslowly(onceevery2seconds):keypadisoffline.

(2)Greenlightflashesinmediumspeed(onceasecond):keypadisonlineandinstandbymode.

(3)Redlightflashesonce:singletaponabutton.

(4)Greenlightflashesinhighspeed(5timesasecond):

starttoenablesomefeedbackfunction.

(5)Greenlightflashesfairlyfast(twiceasecond):startingtheresponsestatusafterpress.

(6)Longbrightgreenlight:thekeypaddatahasbeensubmitted.

(7)Greenlightflashesslowly(onceevery2seconds):lowbattery.

2.FeedbackFunctions

2.1Turnon/off

FeedbackFunctions ManagementFunctions ProductAppearance

Specifications SystemStructure Service&Support

Summary of content (6 pages)

PAGE 1
Keypad-M40L-ProductFunctionalSpecifications Keypad‐M540L‐Product Functional Specifications ProductAppearance FeedbackFunctions ManagementFunctions Specifications SystemStructure Service&Support 1. Product Appearance LED light status indications: (1) Red light flashes slowly (once every 2 seconds): keypad is off line. (2) Green light flashes in medium speed (once a second): keypad is online and in standby mode. (3) Red light flashes once: single tap on a button.
PAGE 2
Keypad-M40L-ProductFunctionalSpecifications ∙ Press [OK] to turn it on. ∙ Auto power off as per time set in software. 2.2 Sign‐in ∙Press [OK] to sign in. 2.3 Single choice ∙ Max choose 1 from 6 options. ∙ Two submission modes: automatically submit or press [OK] to submit. 2.4 Multiple choice ∙ Max choose 6 from 6 options. ∙ Press [OK] to submit after entering your choices.
PAGE 3
Keypad-M40L-ProductFunctionalSpecifications 3.2.1 Set ID number ∙ Keypads have to be numbered to assure the uniqueness of voting data. ∙ Set numbers in two modes: separately (for small quantity of keypads) and in batches (for large number of keypads). 3.2.2 Modify ID number ∙ ID number will be kept automatically after setting. If you want to modify it, it will be in the same way as number setting. 3.2.3 Check ID number ∙ Check keypad ID through software. 3.
PAGE 4
Keypad-M40L-ProductFunctionalSpecifications ∙ Support multiple base stations operating at the same place simultaneously without interfering with each other. Note: M40L has no built‐in serial number. 4.3 User input ∙ 6 voting response buttons: 1/A~6/F ∙ 1 functional operation button: OK for confirmation 4.4 Feedback indication ∙ A two‐color LED light to indicate the status of locking the channel, pressing buttons, low battery and successful submission. 4.
PAGE 5
Keypad-M40L-ProductFunctionalSpecifications jammers. ∙ If the interference signal of 2.4G devices (such as wireless router) is strong, it is useful to adjust the base station channel. After adjusting, the keypads will auto track the channel identity and switch automatically. 4.9 Keypad removal and management ∙ Optional carry cases. 5. System Structure 5.
PAGE 6
Keypad-M40L-ProductFunctionalSpecifications The technical parameters in this document may vary due to the actual use, environment, service life and production batches. If you have any doubt, please do not hesitate to consult SunSky Electronics staff. SunSky Electronics reserves the final right of interpretation of this document. 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules.