Instruction Manual Wireless Signal Repeater model 06053M Features & Benefits 1 2 3 4 7 6 5 1. Integrated Hanger For easy placement. 4. Battery Compartment Cover 2. Repeater On/Off Switches For the corresponding channel ID shown. 6. Low Battery Indicator 3. LED Indicator Flashes when data is being transmitted for indicated sensor. 5. Battery Compartment 7. Search Button Press to manually search for available sensors.
SETUP Repeater Setup Install or Replace Batteries 1. S lide off the battery compartment cover. AcuRite recommends high quality alkaline or lithium batteries in the repeater for the best product performance. Heavy duty or rechargeable batteries are not recommended. 2. I nsert 6 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment. 3. R eplace the battery cover. The repeater requires lithium batteries in low temperature conditions.
Search for Available Sensors Once the repeater is powered on (switches turned to ON in the battery compartment), it will begin searching for sensors transmitting the corresponding ID for 5-10 minutes. If you wish to connect a sensor after the initial 5-10 minute search, press and release the "Search" button in the battery compartment to manually search for sensors within range. Connecting one sensor 1. Relocate the sensor near the repeater and take note of the A-B-C channel.
Placement for Maximum Range Proper placement of the repeater is critical to the performance of this product. Several factors may limit the sensor's ability to communicate with companion products. The sensor's wireless signal may be limited by obstructions such as buildings, roofs, natural landscapes or other objects that break the sensor's "line-of-sight." Refer to the suggested placement options of the repeater below to maximize wireless communication.
Important Placement Guidelines Repeater is water-resistant and is designed for general outdoor use, however, to extend its life place the repeater in an area protected from direct weather elements. Hang the repeater using the integrated hang hole or hanger, or by using string (not included) to hang it from a suitable location. • Repeater must be within 330 ft (100 m) of companion units (sold seperately).
If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance. Care & Maintenance Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives.
Customer Support AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 Visit us at www.AcuRite.
Weather Stations Temperature & Humidity Weather Alert Radio Kitchen Thermometers & Timers Clocks It’s more than accurate, it’s AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence™. www.AcuRite.com Printed in China 06053M INST 060316 ©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147.
