INSTRUCTION MANUAL WIRELESS THERMOMETER Tower Sener Model: 00609A2TX CMXWDRC01137-TX CMXWDRC01134-TX CMXWDCR01137 IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US. 1-888-331-4569 WWW.CRAFTSMAN.
Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
HOW TO SET UP YOUR WIRELESS THERMOMETER WIRELESS THERMOMETER CMXWDCR01137 What You'll Need (Not Included) KNOW YOUR WIRELESS THERMOMETER Weather the day with confidence with your own accurate and up-to-date information – right from your own backyard. The CRAFTSMAN Wireless Thermometer features precise, reliable temperature and humidity readings, along with the time and date.
STEP 4 STEP 5 Place Indoor Display And Wireless Outdoor Sensor Verify Wireless Connection and Signal Strength Both devices are sensitive to their surrounding environment and location. Proper placement is required for accurate readings and wireless communication. Important Location Guidelines For Wireless Communication The following guidelines are very important to ensure both devices have signal strength to connect wirelessly.
REGISTER ONLINE TROUBLESHOOTING PROBLEM CAUSE No bars shown No wireless connection between devices CORRECTION Verify device locations and low battery indicator: • Verify the devices are within 165 feet (50 meters) of each other. You may need to relocate the Indoor Display or Wireless Outdoor Sensor to get a better signal strength. • Verify both devices are located 3 feet (0.9 meters) away from electronics that may interfere with their wireless signal, such as televisions, microwaves, or computers.
REGULATORY INFORMATION FCC Radio Frequency Interference FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any Changes or mod ons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
CRAFTSMAN® is a registered trademark of Stanley Black & Decker, Inc., used under license. © 2020 CRAFTSMAN 08/20 Product Manufactured by: Chaney Instrument Company Lake Geneva, WI 53147 U.S.