INSTALLATION MANUAL MODEL #40065 Wheel Kit REGISTER YOUR PRODUCT ONLINE at championpowerequipment.com or visit championpowerequipment.com Made in China - REV 20190820 Champion Power Equipment, Inc.
40065 - Wheel Kit Parts Included 5 11 66 88 99 22 77 44 44 10 10 33 # 1 Part Number Description No. Part Number 2.16.001 R-Pin 122.201701.07.2 Wheel, Black 1 2.16.00 3 122.201501.23 Pin Roll, Wheel 4 1.6177.1.08 Lock Nut M8 Flange 2 122.201701.07.2 5 1.5789.0845 Flange Bolt M8 x 45 6 122.200700.01 Handle Assembly 3 122.201501.23 7 1.5789.0816 Flange Bolt M8 x 16 8 1.5789.0825 Flange Bolt M8 x 25 4 1.6177.1.08 9 152.201400.00 Rubber Support 10 152.200002.00 Support Leg 2 Qty.
Assembly 40065 - Wheel Kit ASSEMBLY Install the handle 1. Place the handle over the mounting channel on the frame. CAUTION 2. Secure the handle to the frame using the two handle bolts. The wheel kit is not intended for over-the-road use. 3. Place a lock nut on the end of each bolt and fasten securely. DO NOT over tighten the lock nuts. (E) Install the Wheels D 1. Drain oil and fuel, and then tip the generator slowly so that the engine side is up. 2.
WARRANTY* Other Exclusions CHAMPION POWER EQUIPMENT This warranty excludes: 1 YEAR LIMITED WARRANTY –– Cosmetic defects such as paint, decals, etc. –– Wear items such as filter elements, o-rings, etc. Warranty Qualifications To register your product for warranty and FREE lifetime call center technical support please visit: https://www.championpowerequipment.com/register To complete registration you will need to include a copy of the purchase receipt as proof of original purchase.