Installation Guide

ManualsBrandsChambers ManualsAppliances30 in. Schott Ceran Glass-Ceramic Induction Cooktop in Black with 4 Elements including 3,700-Watt Power Element

Installation Instructions

IMPORTANT SAFETY INFORMATION

WARNING Installation and service must be performed by a qualified

installer or service technician.

IMPORTANT Read and save these instructions for future reference.

DANGER Always read and obey all safety information, failure to follow

these instructions can be killed or seriously injured.

Before Installing the cooktop

Visually inspect the cooktop for damage.

Also make sure all cooktop screws are on tight.

Record the model and serial number as found

on the front of your cooktop. When ordering parts

for or making inquiries about your cooktop,

always be sure to include the model and serial

numbers and a lot number or letter from the serial

plate on

your cooktop.

Cutout dimensions of the countertop.

Serial plate is located

front the burner box

of cooktop.

Make sure the wall coverings, countertop and cabinets

around the cooktop can withstand heat (up to 200°F) generated

by the cooktop.

Gently lower the cooktop into the countertop cutout.

NOTE: Do not seal the cooktop to the countertop,

the cooktop must be removable if service is necessary.

Electrical Connection

IMPORTANT

Observe all governing codes and local ordinances.

Model CICT305 need 40 Amp service.

Maximum Connected Load

Model CICT305 ......7.4 kW at 240 VAC, 6.4 kW at 208VAC

Summary of content (5 pages)

PAGE 1
Installation Instructions IMPORTANT SAFETY INFORMATION WARNING Installation and service must be performed by a qualified installer or service technician. IMPORTANT Read and save these instructions for future reference. DANGER Always read and obey all safety information, failure to follow these instructions can be killed or seriously injured. Before Installing the cooktop 1. Visually inspect the cooktop for damage. Also make sure all cooktop screws are on tight. 2.
PAGE 2
Installation Instructions The Induction Cooktops must connect to a separate, grounded wire, single phase, AC Only electrical supply with their own circuit breaker. These appliances must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes. This appliance must be supplied with the proper voltage and frequency and amperage, which is protected by a properly sized circuit breaker or time delay fuse.
PAGE 3
Installation Instructions If 4-Wire Cable from Home Power Supply IMPORTANT: Use the 4-wire cable from Home Power Supply where local codes do not allow grounding through neutral.
PAGE 4
Installation Instructions Installation — 30" (76.2cm) Model CICT305 A. Width B. Depth C. Height 30"(762) 21"(534) 2-5/32"(55) * DO NOT obstruct these areas. IMPORTANT: For perfect ventilation, provide a vent of under the countertop, in the front of the cabinet and in the back of the cabinet. The ventilation opening is to extend the full length of the cooktop cutout.
PAGE 5
Installation Instructions After Installation 1. Remove all the stickers and items from the top of the cooktop surface. 2. Clean cooktop before use. Dry with a soft cloth. See Cleaning Your Cooktop for reference. 3. Read Using Your Cooktop. 4. Turn on the power to the cooktop. 5. Verify all function operation properly. NOTE: If the cooktop does not work, or you met any problem in your operation, please check that the circuit breaker has not tripped or the house has not blown.