User's Manual

ManualsBrandsChamberlain Wireless Products ManualsElectronicsEcho Remote

Table Of Contents

Model OPG-K5/K250

Setup Instructions

1: Setting up the Echo Remote:

• Will the Echo Remote (ERMT) be used with an ULTRX900-R Unit in Receiver Mode?

 No: Go to Step 2.

 Yes: Place the Ultra RX 900 Unit in Learn Mode by disconnecting the power and waiting at

least 5 seconds before reapplying power.

- Within 15 seconds, press the large button on the remote.

- The Ultra RX 900 Unit will buzz indicating success.

- Proceed to Step 5.

2: Setting up the Echo Remote:

• Will the Echo Remote be used with a Gate Access Panel (GAP) or Keypad (OWK) that includes a

GCU or ULTRX900-R as the gate activator?

 No: Go to Step 3.

 Yes: The Echo Remote needs to be taught directly to the Active Unit (GAP or OWK). To

put the Echo Remote in Learn Mode, press the large button, button 2 and button 4 at the

same time, for 1 second and release.

- On the GAP or Keypad Unit, enter in the Master Pin Number, followed by 05.

- The remote will give an acceptance beep indicating success.

- Proceed to Step 6.

Oracle

(TM)

Echo Remote

Universal Wireless Solutions

Model ERMT

12/11/2007

Patents Pending

Thank you for purchasing the

Oracle Echo Remote. This

Compatibility:

• Compatible with Oracle GCU (Gate Controller

Unit)/DFGCU (Dual Frequency Gate Controller

Unit), up to 4 units

• Compatible with Oracle UltraRX 900 Receiver

Module

• Oracle Gate Controller Unit (GCU)/Dual Frequency

Gate Controller Unit (DFGCU). Can be used alone (up

to 4 GCU/DFGCU’s) or in combination with Oracle

GAP and other Access Control and Communication

products.

roduct has been designed an

manufactured in the USA,

utilizing the highest qualit

standards available.

Features:

• For: Gates, Garage Doors, Security Systems, Lighting and anything Electric!

• 4 Button, Multi Channel design, can control 4 devices

• Lithium Battery Lasts for Years and will not be effected by high vehicle temperatures and humidity

• Over 1000 Feet Of Range through multiple channels, chosen automatically

• Audible and Visual Indication Of Command Receipt, as well as indication of failure

• Automatic Retry of Command on Multiple Radio Channels

• 125 Channel, Digital, Ultra-Secure, 900 MHz

• Built-in Unique ID as well as "Learning" of Network ID. WEIGAND compatible

• All functions Performed automatically by Built-in Microprocessor

Summary of content (3 pages)

PAGE 1
Universal Wireless Solutions Oracle (TM) Echo Remote Compatibility: • • • Compatible with Oracle GCU (Gate Controller Unit)/DFGCU (Dual Frequency Gate Controller Unit), up to 4 units Compatible with Oracle UltraRX 900 Receiver Module Oracle Gate Controller Unit (GCU)/Dual Frequency Gate Controller Unit (DFGCU). Can be used alone (up to 4 GCU/DFGCU’s) or in combination with Oracle GAP and other Access Control and Communication products.
PAGE 2
3a: Setting up the Echo Remote: • Will the Echo Remote be used with a Gate Controller Unit (GCU) or a Dual Frequency Gate Controller Unit (DFGCU) as the gate activator? NOTE: If activating an Echo remote directly to a GCU/DFGCU, there can be NO other Primary Gate Access Unit in the network. No: Go to Step 4. Yes: Press the Learn button on the GCU/DFGCU once, until the LED lights up solid, and release.
PAGE 3
4: Setting up the Echo Remote: • • • ! The Echo Remote needs to be taught directly to the Active Unit (MiniGAP (OMG) Unit, Basic Access (OMG2) Unit, or Push-To-Exit (OPE) Unit) To put the Echo Remote in Learn Mode, press the large button, button 2 and button 4 at the same time, for 1 second and release. On the OMG, OMG2, or OPE, press and release the black learn button located inside the unit on the circuit board. - The remote will give an acceptance beep indicating success. - Proceed to Step 6.