SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.
Content Content .......................................................................................... 1 Statement .......................................................................................... 2 Chapter 1 Product intro ..................................................................... 3 1.1 Intro ..................................................................................... 3 1.2 Precaution before using battery ........................................... 4 1.3 Charger .......
Statement 2013 by ShenZhen Chainway Information Technology Co., Ltd. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission written from Chainway. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis.
Chapter 1 Product intro 1.1 Intro Chainway R5 is a newly-developed wearable UHF reader . Connected with wristband by magneticbuckle, it features removable battery, performs data transmission via Type C USB, and enables user information interaction via Bluetoothcoordinated with APP or SDK. And it also can be paired with Android/IOS device to expand RFID capability. This RFID reader can be suitable for warehousing, power inspection, asset management,retail, etc.
1.2 Precaution before using battery ➢ Do not leave battery unused for long time, no matter it is in device or inventory. If battery has been used for 6 months already, it should be check for charging function or it should be disposed correctly. ➢ The lifespan of Li-ion battery is around 2 to 3 years, it can be circularly charged for 300 to 500 times. (One full battery charge period means completely charged and completely discharged.) ➢ When Li-ion battery is not in used, it will continue discharge slowly.
1.3 Charger The charger type is NA010050020, output voltage/current is 5V DC/2A. The plug considered as disconnect device of adapter.
1.4 Notes Note: Using the incorrect type battery has danger of explosion. Please dispose the used battery according to instructions. Note: Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited. Note: The adapter shall be installed near the equipment and shall be easily accessible. Note: The suitable temperature for the product and accessories is 0-10℃ to 50℃.
Chapter 2 Installation instructions 2.
2.3 Battery charge By using USB contact, the original adaptor should be used for charging the device. Make sure not to use other adaptors to charge the device.
2.4 Buttons and function area display R5 Sled reader has 1 power button and 1 Type-C port, 1 SCAN button.
Chapter 3 Demo Test 3.1 Install demo-uhf-bt (1.0.8) 1. Copy demo-uhf-bt (1.0.8) into internal storage of smart phone or C7x device. 2. Click to install. 3. Click icon to open demo.
3.2 Pairing Device 1. 2. 3. 4. Switch on Bluetooth function of smartphone or C7x device. Power on R6. Click BLUETOOTH in the demo. Click SEARCH to search for Nordic_UART_CW. 5. Click Nordic_UART_CW to connect.
6. After connecting successfully, user could click 3 dots on top right to check UHF version, battery percentage and UHF module temperature.
3.3 UHF Scan Function 1. Click START in demo or pull the trigger on R6, the UHF tags could be read. 2. Click STOP in demo to stop reading of UHF tags. 3. Click CLEAR to clean all EPC information.
3.4 UHF Configuration 1. Click CONFIG in demo to adjust working mode and output power.
3.5 UHF Tag Reading and Writing 1. The storage of one tag has 4 zones: RESERVED, EPC, TID and USER. Normally, the default password is 00000000. And TID zone can only be read, other zones can be read and written.
3.6 UHF Tag Lock and Kill 1. Lock Function: For example. User could try to lock down EPC zone.
2. Kill Function: Kill function can be used to kill the tag permanently. Input the correct access password and click kill.
3.7 Barcode Scan Test Select BARCODE SCAN in the demo and click SCAN button on the screen to scan barcodes.
Chapter 4 Device characteristic Physical characteristics Size Weight Color Appearance material Product material Battery specification Indicator LED Buzzer Interfaces 108 mm × 78 mm × 18 mm 200 g / 7.05 oz. Black Plastic Plastic 2000 mAh (removable) Power, Work, Bluetooth NULL Type-C User environment Operating temp. Storage Temp.
Declaration The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, Shenzhen Chainway Information Technology Co.,Ltd. declares that the radio equipment type UHF Sled Reader is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
