SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.
Content Content ........................................................................................... 1 Statement ........................................................................................... 2 Chapter 1 Product intro ...................................................................... 3 1.1 Intro ....................................................................................... 3 1.2 Precaution before using battery ............................................ 4 1.3 Charger .
Statement 2013 by ShenZhen Chainway Information Technology Co., Ltd. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission written from Chainway. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis.
Chapter 1 Product intro 1.1 Intro This is the latest convenient, stylish and efficient handheld data collector, featuring the excellent performance of the Cortex-M3 core processor. The body is light and thin, easy to operate, and the highperformance ultra-high frequency function helps the retail inventory of shoes and clothing. The device transmits the inventory data to the data center through bluetooth, and completes tasks such as inventory management, asset management, and inspection etc.
1.2 Precaution before using battery Do not leave battery unused for long time, no matter it is in device or inventory. If battery has been used for 6 months already, it should be check for charging function or it should be disposed correctly. The lifespan of Li-ion battery is around 2 to 3 years, it can be circularly charged for 300 to 500 times. (One full battery charge period means completely charged and completely discharged.) When Li-ion battery is not in used, it will continue discharge slowly.
1.3 Charger The charger type is GME10D-050200FGu, output voltage/current is 5V DC/2A. The plug considered as disconnect device of adapter.
1.4 Notes Note: Using the incorrect type battery has danger of explosion. Please dispose the used battery according to instructions. Note: Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited. Note: The adapter shall be installed near the equipment and shall be easily accessible. Note: The suitable temperature for the product and accessories is 0-10℃ to 50℃.
Chapter 2 Installation Instructions 2.
Buttons and Indicating Lamps instruction Buttons and Lamps Indicating Power Bluetooth Lamp Main button Description Display power status Display Bluetooth connection status UP Move up cursor DOWN Move down cursor OK Press to confirm current selection.
2.3 Battery charge By using Micro USB contact, the original adaptor should be used for charging the device. Make sure not to use other adaptors to charge the device.
2.4 Buttons and function area display R2 UHF swing reader has 4 function buttons and 1 SCAN button, UHF scanning area, 1 display screen. Power key on the right side.
Chapter 3 Demo Test 3.1 Install demo-uhf-bt (1.1.5) 1. Copy demo-uhf-bt (1.1.5) into internal storage of smart phone or C7x device. 2. Click to install. 3. Click icon to open demo.
3.2 Pairing Device 1. 2. 3. 4. Switch on Bluetooth function of smartphone or C7x device. Power on R2. Click BLUETOOTH in the demo. Click SEARCH to search for Nordic_UART_CW. 5. Click Nordic_UART_CW to connect.
6. After connecting successfully, user could click 3 dots on top right to check UHF version, battery percentage and UHF module temperature.
3.3 Scan Function 1. Click START in demo or press SCAN button on R2, the UHF tags could be read. 2. Click STOP in demo to stop reading of UHF tags. 3. Click CLEAR to clean all EPC information.
3.4 UHF Configuration 1. Click CONFIG in demo to adjust working mode and output power.
3.5 UHF Tag Reading and Writing 1. The storage of one tag has 4 zones: RESERVED, EPC, TID and USER. Normally, the default password is 00000000. And TID zone can only be read, other zones can be read and written.
3.6 UHF Tag Lock and Kill 1. Lock Function: For example. User could try to lock down EPC zone.
2. Kill Function: Kill function can be used to kill the tag permanently. Input the correct access password and click kill.
3.7 Barcode Scan Test Select BARCODE SCAN in the demo and click SCAN button on the screen to scan barcodes.
Chapter 4 Device characteristic Physical characteristics Size Weight Color Appearance material Keypad Battery specification Display Indicator LED Buzzer Interfaces 275x117.5x48.5mm 324g/ 11.43oz (with battery) White Plastic PWR button (side), up, down, return, ok, SCAN button (front) 5200mAh 4.35V 1.77 inch, 128X160 Power, Work, Bluetooth Support Micro-USB Performance MCU RAM+ROM Cortex-M3/72 MHz 64M+4G User environment Operating temp. Storage Temp.
Data collection 2D Imager Scanner 1D Symbologies 2D Symbologies SE2707 UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc. PDF417, MicroPDF417, Composite, RSS, TLC39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX), etc.
3.8 FCC Statement § 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Hereby, Shenzhen Chainway Information Technology Co.,Ltd. declares that the radio equipment type R2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: http://chainway.