Mobile Data Terminal C76 User Manual
目录 Chapter 1 Product Intro.............................................................................................. 2 1.1 Intro................................................................................................................. 2 1.2 Precaution before using battery................................................................. 2 1.3 Charger...........................................................................................................4 1.4 Notes...............................
Chapter 1 Product Intro 1.1 Intro C76 device is a smart mobile PDA that integrated with various features such as UHF,, data acquisition, wireless transmission and data processing etc. It is configured with Andriod 6.0 OS and it possesses high reliability and expansibility. With a set of advanced data acquisition options, C76 can be operated in various industries to acquire precise and abundant datum automatically. Meanwhile, the device can match the options with staffs accordingly.
When battery operating time drops below about 80%, charging time will be increased remarkably. If a battery is stored or otherwise unused for an extended period, be sure to follow the storage instructions in this document. If you do not follow the instructions, and the battery has no charge remaining when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a new battery. Store the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F).
1.3 Charger The charger type is GME10D-050200FGu,output voltage/current is 5V DC/2A. The plug considered as disconnect device of adapter.
1.4 Notes Note: Using the incorrect type battery has danger of explosion. Please dispose the used battery according to instructions. Note: Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited. Note: The adapter shall be installed near the equipment and shall be easily accessible. Note: The suitable temperature for the product and accessories is 0-10℃ to 50℃.
Chapter 2 Installation Guide 2.
2.2 Install Micro SD,cards 2.3 Battery Charging By using USB Type-C contact, the original adaptor should be used for charging the device. Make sure not to use other adaptors to charge the device.
2.4 Buttons and Function Area C72 has 4 side buttons and 4 main keys, handheld connection port locates at rear, 2D scanning module and camera locate at top. POWER Function Key SCAN Main Button Button 1.Power Side 2.Function key button Buttons instruction Description Located on left side, press to ON/OFF device. Located on left side, its function can be defined by software. 3.SCAN Scanning button located on both sides. There are two scanning buttons. 4.Menu Display main menu. Main 5.Home button 6.
Chapter 3 Barcode reader-writer 1. In App Center, to open 2D barcode scan test. 2. Press “SCAN” button or click scan key to start scanning, the parameter “Auto interval” can be adjusted. Caution: Please scan codes in correct way otherwise the scanning will be failed.
Max. radiant power: 0.6mW Wave length: 655nM IEC 62471-1 (Ed.2.0). 21CFR 1040.10 and 1040.11 standard.
Chapter 4 RFID reader 4.1 UHF Click App Center, open “UHF” to scan, read and write tag information, also kill and lock tags.
12
Chapter 5 Other functions 5.1 PING tool 1. Open “PING” in App Center. 2. Setup PING parameter and select external/internal address.
5.2 Bluetooth 1. Open “BT Printer” in App Center. 2. In the list of detected devices, click the device that you want to pair. 3. Select printer and click “Print” to start printing contents.
5.3 GPS 1. Click “GPS” in App Center to open GPS test. 2. Setup GPS parameters to access GPS information.
5.4 Volume setup 1. Click “Volume” in App Center. 2. Setup volume by requirements.
5.5 Sensor 1. Click “Sensor” in App Center. 2. Setup the sensor by requirements.
5.6 Keyboard 1. Click “Keyboard” in App Center. 2. Setup and test the main value of the device.
5.7 Network 1. Click “Network” in App Center. 2. Test WIFI/Mobile signal by requirements.
Chapter 6 Device characteristic Size Weight Display Touch panel Battery Expansion Expansion Slot Audio Camera Physical characteristics 162.5mm*80.0mm*14.5mm 540g 5.
WLAN WPAN Barcode scanning RFID SDK Language Develop Communication IEEE802.11 a/b/g/n, 2.4G/5G dual-band, internal antenna Bluetooth 4.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.