SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.
1
Statement 2013 by ShenZhen Chainway Information Technology Co., Ltd. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission written from Chainway. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis.
Contents Statement........................................................................................................2 Chapter 1 Brief Instruction........................................................................... 5 1.1 Brief Instruction.............................................................................. 5 1.2 Precaution Before Using Battery................................................ 6 Chapter 2 Installation Guide...............................................................
6.4 Volume Settings................................................................................23 6.5 Sensor................................................................................................ 24 6.6 Keyboard............................................................................................25 6.7 Network.............................................................................................. 25 Chapter 7 Device Specifications.....................................................
Chapter 1 Brief Instruction 1.1 Brief Instruction Chainway C6000 is a series of Android powered smart terminals, with data capture, data processing, wireless communication. It is with high-reliability & high-expansibility. Auto & Accurate data collection is achieved in various business fields via a complete solution of premium options, the flexible solution among options and operators is suited-up.
1.2 Precaution Before Using Battery Do not leave batteries unused for extended periods of time, either in the product or in storage. When the battery has been unused for 6 months, check the charge status and charge or dispose of the battery as appropriate. The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500 charge cycles, whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged, and fully recharged again.
The battery charge time increases significantly. If a battery is stored or otherwise unused for an extended period, be sure to follow the storage instructions in this document. If you do not follow the instructions, and the battery has no charge remaining when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a new battery. Always follow the charging instructions provided with your product.
Chapter 2 Installation Guide 2.1 Appearance The C6000 device has black and white appearance optional.
2.2 Buttons Button Power Button Custom Function Button SCAN X Num Fn Setting Button Enter Function Press and hold to turn the device on or off.
2.3 Micro SD、SIM、PSAM Card Installation Detailed installation of Micro SD、SIM、PSAM Card steps are as follows: 2.4 Battery Charging Use the standard adapter to charge the battery via the USB connector of the snap-on. Don't use other brands of charger for device.
2.5 Device Power on/off Press the ‘Power’ button on the top about 3s due to power on/off. And press it shortly to wake up.
Chapter 3 Call Function 3.1 Phone Click this icon . Click the number button to input the numbers. Click the Click the button to confirm and dial. to end the calling.
3.2 Contacts Click ‘Contacts’ to open the contacts list. Click to add the new contact. Click to import/export or delete the contact list.
3.3 Messaging Click to open the message list. Click to input the content. Click to send the message. Click to add photos, videos.
Chapter 4 Barcode Reader Open the Barcode Demo in APP Center and then press the ‘Scan’ button to start scanning. Note: Please scan the barcode correctly, otherwise the scanning might be failed.
Chapter 5 RFID Reader 5.1 High Frequency 5.1.1 14443A Open the 14443A demo within Appcenter, and press the ‘Scan’ button to start reading. Mifare and Ultralight reading/writing are also supported.
5.1.2 14443B Open the 14443B demo within Appcenter, and gain UID of the card.
5.1.3 15693 Open the “15693” demo within Appcenter, and then reading and writing information of the tag.
5.2 NFC Open the “NFC” demo within Appcenter, and then reading and writing information of the tag.
Chapter 6 Other Functions 6.1 PING 1. Open the Ping in Appcenter. 2. Set the Ping parameters and select the internal/external addresses.
6.2 Bluetooth 1. Open the Bluetooth demo in Appcenter and turn on the Bluetooth. 2. Input the content or select the file, then scan the nearby Bluetooth printer and pair them. 3. Select the printer and click ‘Print’ to print the content.
6.3 GPS 1. Open the GPS demo in Appcenter and turn on GPS module. 2. Set the GPS parameters and get the GPS data information.
6.4 Volume Settings 1. Open the Volume Setting demo in Appcenter. 2. Set the volumes based on the requirements.
6.5 Sensor 1. 2. Open the Sensor demo in Appcenter. Test the sensor based on the requirements.
6.6 Keyboard 1. Open the Keyboard demo in Handset Appcenter. 2. Set and test the key values of the device. 6.7 Network 1. Open the Network demo in Appcenter. 2. Test the WIFI/Mobile signal based on the requirements.
Chapter 7 Device Specifications Physical Parameters Dimensions 157.6mm*73.7mm*29mm Weight 292 g / 10.3 oz.(includes main battery) Screen 4'' WVGA (480*800), 16.7M colors Keyboard 3 TPsoft keys, numeric keypad, 3 side buttons Battery Main bat. (rechargeable li-ion polymer, 3.7V, 4200 mAh) Expansion Slot MicroSD/TF, maximum capacity of 32G SIM Slot 1 PSAM, 1 SIM, 1 MicroSD Audio 0.5W wat Camera 8/13MP Autofocus with flash Performance Parameters CPU Cortex A-53 2.
Environmental Parameters Operating Temperature -4oF to 122oF / -20oC to 50oC Storage Temperature -40oF to 158oF / -40oC to 70oC Humidity 5%RH-95%RH (non-condensing) Dropping Survive Multiple 2 m / 6.56 ft.
Data Collection 1D Barcode Scan Engine 1D barcode (Symbol SE955, laser, hardware decoding): UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc. 2D barcode (Symbol SE4500,COMS, software decoding): Data Matrix, QR Code, Aztec Code, PDF417, US Planet, UK Postal, etc.
FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment.