SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO., LTD.
Statement 2013 by ShenZhen Chainway Information Technology Co., Ltd. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission written from Chainway. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis.
Contents Statement .......................................................................................... 1 Chapter 1 Brief Instruction ................................................................. 4 1.1 Brief Instruction ................................................................... 4 1.2 Precaution Before Using Battery ......................................... 5 Chapter 2 Installation Guide .............................................................. 7 2.1 Appearance ...................
Chapter 7 Device Specifications ......................................................
Chapter 1 Brief Instruction 1.1 Brief Instruction Chainway C60 is our newly-developed rugged handheld computer which exhibits extremely powerful performance, and that too while being immensely lightweight and portable. Built with Android 10 OS and Qualcomm high-performance processor, it features a removable large capacity battery and vigorous system configuration. It has rich functionality features for barcode scanning, RFID, NFC, front and rear cameras, etc., and can support 4G and WiFi.
1.2 Precaution Before Using Battery Do not leave batteries unused for extended periods of time, either in the product or in storage. When the battery has been unused for 6 months, check the charge status and charge or dispose of the battery as appropriate. The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500 charge cycles, whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged, and fully recharged again.
The battery charge time increases significantly. If a battery is stored or otherwise unused for an extended period, be sure to follow the storage instructions in this document. If you do not follow the instructions, and the battery has no charge remaining when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a new battery. Always follow the charging instructions provided with your product.
Chapter 2 Installation Guide 2.1 Appearance The C60 device appearance is as follows.
2.2 Buttons Button Power Button Custom Function Button SCAN X Num Fn Direction Buttons Enter Function Press and hold to turn the device on or off.
2.3 Micro SD、SIM card Installation User need to install TF card and SIM card according to the slots of card tray as below. Then insert into slot of SIM/TF. 2.4 Battery Charging Use the adapter to charge the battery. Don't use other brands of charger for device.
2.5 Device Power on/off Press the ‘Power’ button on side about 3s due to power on/off. And press it shortly to wake up.
Chapter 3 Call Function 3.1 Phone Click this icon . Click the number button to input the numbers. Click the Click the button to confirm and dial. to end the calling.
3.2 Contacts Click ‘Contacts’ to open the contacts list. Click “Create new contact” to add the new contact.
3.3 Messaging Click to open the message list. Click to input the content. Click to send the message. Click to add photos, videos.
Chapter 4 Barcode Reader Open the Barcode2D Demo in APP Center and then press the ‘Scan’ button to start scanning. Note: Please scan the barcode correctly, otherwise the scanning might be failed.
Chapter 5 RFID Reader(optional) 5.1 NFC Open the “NFC” demo within Appcenter, and then reading and writing information of the tag.
Chapter 6 Other Functions 6.1 PING 1. Open the Ping in Appcenter. 2. Set the Ping parameters and select the internal/external addresses.
6.2 Bluetooth 1. Open the Bluetooth demo in Appcenter and turn on the Bluetooth. 2. Input the content or select the file, then scan the nearby Bluetooth printer and pair them. 3. Select the printer and click ‘Print’ to print the content.
6.3 GPS 1. Open the GPS demo in Appcenter and turn on GPS module. 2. Set the GPS parameters and get the GPS data information.
6.4 Volume Settings 1. Open the Volume Setting demo in Appcenter. 2. Set the volumes based on the requirements.
6.5 Sensor 1. 2. Open the Sensor demo in Appcenter. Test the sensor based on the requirements.
6.6 Keyboard 1. Open the Keyboard demo in Appcenter. 2. Set and test the key values of the device.
6.7 Network 1. Open the Network demo in Appcenter. 2. Test the WIFI/Mobile signal based on the requirements.
Chapter 7 Device Specifications Dimensions Physical Parameters 159.5 x 65.7 x 16.8 mm / 6.28 x 2.58 x 0.66 in. Weight 219g / 7.72 oz. (device with battery) Screen 4-inch (16:9), IPS LTPS 800*480 4-inch (18:9), IPS LTPS 1080*540 5 side keys : power, 2 scan keys, volume +/Main keyboard: 22 keys (numeric keys, direction key, screen-lock key, Enter, Del, F1-F10, etc.
Storage Card Type Maximum Expansion Storage TF card 128GB Environmental Parameters -20 ℃~+50 ℃ Operating Temperature Storage Temperature Humidity -40 ℃~+70 ℃ 5%RH-95%RH (non-condensing) Dropping Survive Multiple 2.0 m / 6.56 ft. drops to the concrete across the operating temperature range Sealing IP65, IEC compliance Tumble Specification 1000 x 0.5 m/1.
Vo-LTF Security and Encryption: WEP,WPA/WPA2-PSK(TKIP and AES),WAPI-PSK—EAP-TTLS,EAP-TLS, PEAPMSCHAPv2, PEAP-LTS,PEAP-GTC,etc. Support Vo-LTE HD video voice call Bluetooth Bluetooth 4.2/4.1+HS/4.0/3.0+HS/2.1+EDR GNSS GPS/AGPS, GLONASS, BeiDou,Galileo,internal antenna 2D Barcode Scan Engine Data Collection Zebra: SE4710; Honeywell: N6603; DS7000, IA166S, IA171S 1D UPC/EAN, Code128, Symbologies Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc.
Programming Language Developing Tool Java Eclipse/Android Studio 26
Warning FCC: The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types C60(FCC ID: 2AC6AC60) has also been tested against this SAR limit. The exposure standard for wireless mobile hotspots employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
CE: EU Regulatory Conformance Declaration of Conformity Hereby, Shenzhen Chainway Information Technology Co., Ltd. declares that the radio equipment type Mobile Data Terminal of C60 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.chainway.net Your device has been designed and produced to comply with international norms (ICNIRP) for exposure to radiofrequencies.
WWAN Frequency Band Maximum output power (dBm) GSM 900 32 GSM 1800 30.5 WCDMA Ⅰ 23.5 WCDMA Ⅷ 23 FDD LTE B1 23.5 FDD LTE B3/B7/28 23 FDD LTE B8 22.5 FDD LTE B20 24 TDD LTE B38 23 TDD LTE B40 22.5 WLAN Frequency Band EIRP Power(dBm) Bluetooth 12.35 2.4G WiFi 17.78 5G WiFi 13.85 NFC/GPS/GLONASS/BDS/Galileo NFC -14.
