Installation Instructions

ManualsBrandsCetis ManualsElectronicsCordless Phone

Cordless

& RediDock

Userguide

This

package

should contain the

oll

wing:

•

Telephone base

unit

•

Mobile handset

•

Printed paper

eplat

•

Clear plastic faceplate cover

•

Power adapter

•

Handset

batt

ery

Optional items to be ordered separat

•

Handset package: charging station,

adapter, battery, handset

Features

•

Phone

circuit can directly drive

hands-fr

•

Digital wireless/no interference technology

•

10 programmable speed dial keys for

oring

up to 24 elements (digits and characters such

as *, #, Flash, and Pause)

•

Message

Waiting Indicator and OneTouch

message

retrieval

key integrated into design

•

Handset auto-sync

egis

ation

•

Each base

unit can

up to 4 additional

handsets

•

Handset battery

w-v

olt

age

arning

•

Message

high- and

w-v

olt

age

detection

•

Message

for

polarity Line 1 or Line 2

•

Extension detection function

•

6-ringer option (using the handset

numeric

keypad

1–6)

Installation

CONNECTING THE POWER LINE

ORD

Two line cords are provided: one RJ45 and one

J11

install, simply plug

one end

of the

RJ45

cord

int

the modular jack at the top end of the base

unit

and the other end into the

RJ45

phone jack on the

power

adapt

Take the other

RJ11

line cord and

plug into the line jack on the power adaptor, then

plug the other

end

into the wall

Finish

plugging

the power adaptor into normal wall outlet

Be sure your power adaptor is specified for

our

region of the world prior to plugging into the w

all

sock

HANDSET B

TTER

CHARGING THE HANDSET BATTERY (ON B

ASE

AND CHARGING

STATION)

The handset battery is a Ni-MH battery

This

battery

requires

a full charge prior to use

ensure

ong

life

To charge the battery,

omplet

the installation procedure by plugging the

source into the wall outlet and the telephone

base

or charging station

Install the battery per instructions,

inserting

battery plug into

eptacl

Place the battery in the opening in the handset,

press into place, then replace cover, and place

handset into

base (face down)

or charging

ation

(face

wn)

BATTERY LIFE—WHEN

OMPLETEL

CHARGED

•

Talk time: 7.5 hours

•

Standby (handset

off

hook):

6 days

•

Charge

for 24

hours

ensure

a fully charged

battery

INSTALLING THE BATTERY INTO

THE

HANDSET

Hold the handset and gently push up the

handset back shell

Remove

the back,

exposing

the

batt

ery

compartment

Slide the battery plug into its

eptacl

matching up slot and opening on

eptacl

Do not force the battery

Press

on back end

of battery to

snap

into plac

Put the back shell of handset into

ot,

then press down and snap into plac

Summary of content (8 pages)

PAGE 1
Cordless & RediDock Userguide This package should contain the following: • • • • • • Telephone base unit Mobile handset Printed paper faceplate Clear plastic faceplate cover Power adapter Handset battery Optional items to be ordered separately: • Handset package: charging station, power adapter, battery, handset Features • Phone circuit can directly drive hands-free • Digital wireless/no interference technology • 10 programmable speed dial keys for storing up to 24 elements (digits and characters such as
PAGE 2
FACEPLATE To install a faceplate, simply remove the plastic overly (no tools required) and insert the paper faceplate over the buttons . Then replace the plastic overlay. Operation VOLUME CONTROL Ringer volume control: The ringer volume is controlled via the “ Volume +/–” key. There are five volume levels . When you have reached the maximum or minimum sound level there will be a warning beep . HANDSET VOLUME CONTROLS The handset volume control increases the volume of the handset .
PAGE 3
Line will light up, and the base and the handset will enter Registration mode . When the base and the handset have successfully paired, the phone will beep a Registration confirmation tone . SWITCH BETWEEN BASE AND HANDSET If the handset is registered with the base unit, then the handset and base can switch the call freely . To switch from the handset to the base, press the Speaker key in the base unit . Press the ON/OFF key in the handset to switch from base to handset .
PAGE 4
and plug the other end (with a USB-mini or micro connector) to your device, and you’re set to go . Programming PROGRAM SPEED DIALS USING SUBMERGED [STORE] AND [FLASH] [Store] and [Flash] programming keys are located under the faceplate and overlay; begin by lifting up faceplate and overlay, by either a paperclip or sharp pointer . STORING A NUMBER INTO MEMORY KEYS—[STORE] Each speed-dial location can store up to 24 digits in tone mode .
PAGE 5
In Case of Power Outage The phone base will function without commercial power (but the handset will not operate). Ringer: When receiving a new call, the phone base will ring, but not the handset . Pick up: Press the Line or Speaker key to pick up . Dial: Under off-hook status the loudspeaker and microphone will receive sound and calls can be placed using the dial pad . Hang-up: After talking, press the Speaker or Line key to hang up .
PAGE 6
10 . Avoid using a telephone (other than a cordless type) during an electrical storm . There may be a remote risk of electric shock from lightning . 11 . Do not use the telephone to report a gas leak in the vicinity of the leak . PLEASE SAVE THESE INSTRUCTIONS. FCC Interference Information This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: 1 . This device may not cause harmful interference . 2 .
PAGE 7
customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations . Repairs to certified equipment should be coordinated by a representative designated by the supplier . Any repairs or alterations made by a user to this equipment, or equipment malfunctions, may give the telephone communications company cause to request the user to disconnect the equipment .
PAGE 8
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by ACTA . A compliant telephone cord and modular plug are provided with this telephone . It is designed to be connected to a compatible modular jack that is also compliant . See installation instructions for details . The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone line .