Quick Start Guide

ManualsBrandsCenturylink ManualsElectronicsCAP1800-AX

CAP1800-AX Quick Start Guide

Document Version: 1.0

All trademarks and trade names are the properties of their respective owners

The following items are included in the box:

1. CAP1800-AX

2. Quick Start Guide

3. Power adapter

4. Ethernet cable

Summary of content (4 pages)

PAGE 1
CAP1800-AX Quick Start Guide Document Version: 1.0 Copyright 2020. All Rights Reserved. All trademarks and trade names are the properties of their respective owners The following items are included in the box: 1. CAP1800-AX 2. Quick Start Guide 3. Power adapter / 4.
PAGE 2
If any of these items are damaged or missing, please contact your service provider immediately Chapter 1 Introduction This chapter provides details of the CAP1800-AX's features, components, and capabilities Overview The CAP1800-AX is designed to enhance the connectivity between your WiFi router and wireless client device while increasing the coverage of your existing WiFi network. With its simple setup, this high-speed 802.11ax extender works seamlessly with most routers.
PAGE 3
Chapter 2 Basic set up Step 1: Make sure the WiFi router is on and working properly. Step 2: Plug the CAP1800-AX near the WiFi router during setup. Step 3: Wait for the CAP1800-AX to boot up Step 4: Connect an Ethernet cable to the CAP1800-AX and your PC. Step 5: Launch the browser to do set up .
PAGE 4
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.