Installation Instructions

Areas of application:

Remote control switches,alarm systems, , remote control door locks, remote control electric

shutter doors and Windows, water pump control, industrial control products, etc.;

technical parameters:

Working voltage: DC9V

Working frequency: 433.92 MHz

Standby current: 0MA

Working current: > 80MA

Encoding Type: fixed code (2262) and learning code (EV1527)

Transmission distance: > 30 m (open area sensitivity more than 103 dBm)

Output power: 30 m (0DBM);

Transfer rate: < 10 KBPS

Modulation mode: ASK (amplitude modulation)

Working temperature: - 10 ℃ ~ + 70 ℃

Size:108* 50 * 16 mm

* Tips: 1. This series of remote wireless remote control with 1/2/3/4/6/8/12 key optional;

2.With the power switch, remote control can turn off the power save electricity when not

in use.

PAGE 1
Areas of application: Remote control switches,alarm systems, , remote control door locks, remote control electric shutter doors and Windows, water pump control, industrial control products, etc.; technical parameters: Working voltage: DC9V Working frequency: 433.
PAGE 2
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.