Hive Active Plug™ Starter Pack Smart Plug Trousse de démarrage MD User guide Guía de usuario Mode d’emploi
Let’s get started setting up your account. Just download the Hive app or visit hivehome.com/registration to enter in your details. Once your account has been confirmed, you can login through the Hive app and start pairing your devices. ENGLISH If you already have an account with us, don’t worry about this step. 2 Your Hive Hub Your hub is the heart of your Hive system.
Activate your Hub • Log-in using the Hive app or the online dashboard, and enter the hub ID when prompted. This is the 6 character code which you’ll find on the bottom of the hub. Remember: For your Hive devices to work correctly your hub must be kept plugged in and switched on. ENGLISH 3 That’s it! You can now pair your other Hive devices by tapping Install devices in the app or online dashboard. Usage Your Hive Hub is designed for indoor use only.
Plug it in and switch the power socket on Once plugged in the LED light on the front of your plug will begin to flash amber while it searches to find your hub. Once your Hive Active Plug™ appears on the screen, you can name it and press Save to complete setup. ENGLISH 3 That’s it! The LED light on your Hive Active Plug™ will stop flashing once connected. Now you can plug in the device you’d like to control remotely. Download the Hive app. Usage Your Hive Active Plug™ is designed for indoor use only.
hivehome.com FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.