Install Guide AlertMe Thermostat Control Start Saving Money. Stop Wasting Energy.
In Home Thermostat AlertMe Hub Keyfobs x2 What’s in the box Your AlertMe Thermostat Control system comes with the following accessories: In Home Thermostat (CT30) Installed in your home, the Thermostat allows you to manually adjust the temperature and switch between Heat, Cool and Off modes. AlertMe Hub Your AlertMe Hub talks wirelessly to your In Home Thermostat and connects securely to the Internet, putting your Thermostat online.
The installation guide The following steps will guide you through the installation of your AlertMe system, as well as set up of your Home Heating and AC schedule. Before you start 1 Before you start You will need access to your broadband router, computer and 2 spare power sockets.
Terms and Conditions Once you have read the Safety Notices and Terms & Conditions by clicking on the orange text in the middle of the screen, please tick the box and click “Continue”. 5 Register your kit The Hub ID can be found on the back of the hub, below the power and ethernet sockets. The three letters need to be entered in the first box, and the three numbers in the second. When you have done this click “Submit”.
8 Preparing your hub The hub will now securely link to our servers; this may take a minute or two, however once this has occurred the screen will advance. 9 Power up your devices The hub is now connected; you now need to power up your other devices. For installation it is best to have these devices placed within two metres of the AlertMe hub, they can be moved away later. When you have done this click “Submit”. 8 9 Please note! The Keyfob LEDs will light up solid green, before starting to flash.
8 11 Finding your devices The system will now configure whilst your devices are in the process of being securely linked to the AlertMe servers. Once 9 this completes the process will advance to the next step. 8 12 Install complete! The install process is now complete. Click “Close” when you are ready to name and place the accessories. 11 12 Home schedule set up Once you have installed your AlertMe kit, you will be prompted to set up your Home heating schedule.
8 14 Modify your movements You will now be prompted to set the times according to your daily movements, both on weekdays and the weekend. Select 9 ‘continue’ when done, or choose to ‘skip’ this section and use the shown settings as default. You can edit these later on. 8 15 Set the temperature You will now be prompted to set the temperatures you would like in your home, according to your daily movements. This applies for the Heating System in Winter as well as the AC system in Summer.
Frequently Asked Questions: Why will my hub will not authorise? What is the wireless range of the system? Please confirm that your hub is connected via mans power and Ethernet cable to a working broadband router. The normal range of the system is around 20 metres – however this is dependent on the type of building and any obstacles between the hub and devices.
FCC documentation Regulatory Compliance From Alertme FCC In the United States radio-frequency equipment is regulated by the Federal Communications Commission (FCC). The following Alertme.com accessories are defined by the FCC as Class B Digital Devices and Intentional Radiators. Each is subject to Certification by the FCC and has a unique FCC Identifier: [see FCC rules 15.3 (i) (k) (o) (z), 2.907, 2.
Contact information If you require any further assistance, please contact our customer support team on 0888 882- 4440 or support@ alertme.com Maintenance Keep all sensors away from water or liquids. Disconnect before cleaning and never immerse in water or other liquids. Please contact AlertMe Customer Support if any components appear to be damaged or faulty. There are no serviceable parts in the Hub so there is no need to access inside. The user must never attempt to open or tamper with the Hub.
