Central Brass C O M P A N Y A Division of Pioneer Industries, Inc. Installation Guide Slow-Close Single Handle Basin Faucet: • 0355-AN2C • 0356-AN2C • 0355-AN2H • 0356-AN2H • 0355-AN2P • 0356-AN2P • 0355-AVN2C • 0356-AVN2C • 0355-AVN2H • 0356-AVN2H • 0355-AVN2P • 0356-AVN2P This product meets the following standards: • ASME A112.18.1 • ANSI A117.1 • ANSI / NSF 61, SECTION 9 • CUPC / IAPMO LISTED / ADA COMPLIANT • CONTAINS NO MORE THAN 0.
Thank You For Choosing Central Brass Products Thank you for purchasing this quality product. Central Brass products are rigorously tested to provide long service under normal conditions. Prior to installation, familiarize yourself with this parts diagram. Make sure that you have all of the illustrated parts for your Central Brass product before installation. Care Instructions Central Brass products are designed and engineered under strict quality standards.
CENTRAL BRASS LIMITED WARRANTY The Central Brass Company provides to the original consumer the following warranties for Genuine Central Brass manufactured products and components used in commercial or residential applications. Central Brass Company will replace, free of charge, to the original consumer purchaser, any and all parts that prove defective under normal installation, use, and service.
0355-AN2/0355-AVN2-Replacement Parts ITEM# DESCRIPTION A CS-13003C,H,P Cold/Hot/Plain Push Handle B CS-49016C,H,P Cold/Hot/Plain Repair Kit C 170-WA 3/32” Allen Wrench D 30-L Aerator E 166-UB Adapter (For ‘V’ Suffix) F CS-49004 Vandal 0.
0356-AN2/0356-AVN2-Replacement Parts ITEM# DESCRIPTION A CS-13003C,H,P Cold/Hot/Plain Push Handle B CS-49016C,H,P Cold/Hot/Plain Repair Kit C 170-WA 3/32” Allen Wrench D 30-L Aerator E 166-UB Adapter (For ‘V’ Suffix) F CS-49004 Vandal 0.
Faucet Installation 1. Apply the plumbers putty underneath of the faucet (A). Place the faucet (A) through mounting hole. Slide the mounting bracket (B) from underneath of the mounting surface through the faucet shank. Tighten the locknut (C) from underneath. Remove excess plumbers putty from the mounting surface.
Faucet Installation 2. 3. 4. 5. Connect the faucet shank to inlet supply line (D). Connect the supply stop (E) to the inlet supply line (D). Make sure inlet supply line (D) is securely tighten. Do not overtighten. Turn on supply stop. Remove aerator (F). Push the handle. Flush and allow water to run at full flow. Check for any leaks. Make sure all the connections are secure. Replace aerator (F).
Faucet Installation Adjusting the Slow Close Timing:6. The slow close cartridge is factory preset at 10 seconds @ 60 PSI. Depending on the inlet water pressure and water temperature this timing can vary. If timing need to be changed, remove the handle(H) by loosening allen screw (G). 7. With the help of flat head screwdriver, loosen the screw to decrease the timing and tighten the screw to increase the timing.
Central Brass C O M P A N Y A Division of Pioneer Industries, Inc. 6892 Snowville Road | Brecksville, Ohio 44141 Telephone: (800) 321-8630 | (216) 883-0220 | Fax: (800) 338-9414 Hours: M - F, 7:30am to 5:00pm EST www.centralbrass.
