User's Manual

© CenTrak 2016. All Rights Reserved. Proprietary and Confidential.
IT-323H Virtual Wall
• No physical wall or curtain needed to limit area being divided
• Semi-private room separation to accurately locate an asset or
person on either side of the room
• Division of bays or bed areas typically important in ER and OR
Pre-Op/Post-Op settings
• Can be configured and monitored by central server for
superior control
• Battery-operated
• Simple to install clip-on ceiling mounting bracket
The Virtual Wall is a Gen2IR (infrared) signaling unit used with IR-enabled tags
to provide a method of locating tagged assets or people for facilities that
require sub-room level accuracy. Virtual Walls are geared to semi-private
rooms and bays typically found in ER and OR settings. Unlike room-level
monitors, Virtual Walls do not need physical walls to limit the area of
coverage.
About CenTrak’s Gen2IR™ Technology
The CenTrak core RTLS differs from legacy in its combined use of a patented
second-generation infrared (Gen2IR™) and active-RFID technology. Monitors
(and Virtual Walls) transmit a unique location ID using Gen2IR ,which is
received by any tag in that location. The tag communicates the location ID and
its own unique ID via RF to the CenTrak Location Server using a hospital’s
existing wired or Wi-Fi network, where it can be accessed in real-time by
hospital personnel and integrated with third party solution providers.
IT-323H Virtual Wall
IT-323H Virtual Wall shown
mounted to a ceiling
CenTrak, Inc.
826 Newtown Yardley Road
Newtown, PA 18940
t: 215-860-2928 e: [e-mail]
www.centrak.com