MP-430T User’s Manual PDF created with pdfFactory Pro trial version www.pdffactory.
Features ◎ Multi-Codec Player - MP3, WMA, OGG(Q10) Support ◎ Voice Recording - Voice, Line In, FM Radio - 32KHz, 44.1KHz Sample Rate - 32Kbps ~ 128Kbps Bitrate ◎ Firmware Upgrade ◎ Graphic LCD supporting multiple languages ◎ Lyric support ◎ FM Radio - FM area setting - FM sensitivity setting ◎ Clock & Reservation & Alarm ◎ 7 Equalizer Types (EQ) - Normal, Rock, Jazz, Classic, Pops, User, SRS ◎ SRS WOW support ◎ File Browser - Supports the file browser for both play and stop mode.
Name of the Parts Front View Rear View Earphone Necklace Hole Hold On/Off Microphone RESET LINE-IN Select/Browser/Menu REW (Previous/Next) FF (Next/Previous) Volume –(Down) Volume +(Up) Recording/Stop Play/Stop Power On/Off Mode Setting/ FUNCTION/ A<->B PDF created with pdfFactory Pro trial version www.pdffactory.
Description on LCD Audio Play Lyric FM Radio Recording Menu PDF created with pdfFactory Pro trial version www.pdffactory.
PDF created with pdfFactory Pro trial version www.pdffactory.
Basic Functions 1) Lock / Unlock Push Up/Down Lock: Push the HOLD switch up to the arrow direction. Unlock: Push the HOLD switch down to the arrow direction. ☞ Note ☜ ▶ You can prevent button operation when you set the HOLD switch. ▶ If you press any button while the HOLD switch is locked, the “KEY HOLD” message for about 2 seconds and button input will be disabled. 2) Power On / Power Off Power On: Press the PLAY/STOP button longer Press Longer than 2 seconds to turn on the player.
4) Mode Switching Audio Play FM Radio Recording System Menu Press the SELECT button longer once. Use the REW(◀◀)/FF(▶▶) button to select the mode you want, and press the SELECT button again to enter into the selected mode 1) Audio Play Mode: MP3, WMA or OGG audio file playback 2) FM Radio Mode: FM radio listening 3) Voice Mode: Voice, Line in or FM radio recording 4) System Menu Mode: System setting. ☞ Note ☜ ▶ Press the REC/STOP button in the audio play mode to start voice recording.
2) Playback/Stop Press shortly Playback: Press the PLAY/STOP button shortly once. Stop: Press the PLAY/STOP button shortly once again. Playback Stop 3) File Search/Navigation/Selection Push to the left/right shortly once. Push to the REW(◀◀)/FF(▶▶) direction shortly once during playback. Push to the REW(◀◀)/FF(▶▶) direction longer once during playback. Push to the REW(◀◀)/FF(▶▶) direction shortly once during stop.
4) Audio Setting Mode Press the FUNC button longer in the stop or playback mode to enter into the audio setting mode. Press the FUNC button to change the audio setting mode to EQ Setting ⇒ Repeat Setting ⇒ Play Speed. Press longer EQ Setting ▶ Set the EQ mode using the +(Up)/-(Down) button. (Normal ⇒ Rock ⇒ Jazz ⇒ Classic ⇒ Pops ⇒ User ⇒ SRS) ▶ Set the level of 5 bands using the REW(◀◀)/FF(▶▶) button.
5) Sector Repetition (A↔B) Plays back the selected sector repetitively. On: Press the FUNC button once shortly during playback to set the A point. Press the FUNC button shortly again to set Press shortly the B point. Then, playback will be repeated between the point A and B. Off: Press the FUNC button once shortly. Setting A Point Setting B Point 4) Browser Mode Press shortly If you press the SELECT button in the audio play mode or recording wait mode, the browser mode will be selected.
MUSIC RECORD ETC ① Finding a directory or a file Move to the directory or the music file you want, using the +(Up)/-(Down) button. ② Selecting a directory or a file Press the PLAY/STOP button, SELECT button or the FF button shortly to move to the target directory if you press the button on the directory name, or the file browser will be closed and the selected file will be played back if you press the button on the file name.
- You can set up to 99 bookmarks. ① Saving a bookmark. - If you press the REC/STOP button while playing back the audio file, the file name and the current playback time will be recorded. - The saving location will increase sequentially: 99 ⇒ 01 ⇒ 02 ⇒ .... ② Finding a bookmark Each time you press the REW(◀◀)/FF(▶▶) button, the bookmark number will increase/decrease and the bookmark details will be displayed.
< Playlist Browser> ◎ There are two types of a playlist. - Playlist that can be added/deleted to/from the player: "Playlist.m3u" – Only 1 playlist is available. - Read-only playlist: m3u file that was created by Winamp – several playlists can exist. - Playlist file (.m3u) can be recognized only when it is in the “root/Playlist" directory. ① Adding a playlist. ◎ You can use two methods of adding a playlist. - Press the REC button in the audio stop mode.
- Applying the repeat mode and the shuffle mode Repeat Mode Description of Operation Plays back the file selected from the playlist only once. Plays back the file selected from the playlist only indefinitely. Plays back all files in the playlist only once. Plays back all files in the playlist only indefinitely. ③ Deleting a playlist - Deleting a playlist (m3u file): When you press the REC button at the step 1, the playlist deletion confirmation popup window will appear.
(2) Repeat Mode Repeat Mode Description Plays back the selected one file only and stops playback. Plays back the selected one file repetitively. Plays back all files and stops playback. Plays back all files repetitively. Plays back all files in the current directory and stops playback. Plays back all files in the current directory repetitively. Plays back all files once randomly and stops playback. Plays back all files repetitively with a random order.
FM Radio Mode 1) Switching to the FM Radio Mode If you’re currently in the mode other than the FM radio mode, press the SELECT button longer once to change the mode. Use the REW(◀◀)/FF(▶▶) button to select the FM radio mode and press the SELECT button to enter into the FM radio mode. Press longer 2) Changing the FM Mode The FM radio has three modes (Normal⇒ Preset1⇒ Preset2 ) Press the SELECT button shortly to switch from the normal mode to the Preset mode 1.
3) Auto Memory If you press the FUNC button longer in the normal mode, only frequencies with good sensitivity will be saved in the preset. The automatically saved frequencies will work in the Preset1, Preset2 mode only. Press longer ☞ Note ☜ ▶ You can set the FM sensitivity level using FM Menu⇒FM Setting⇒FM Sense. ▶ You may not be able to save the broadcasting channel in the weak sensitivity area. 4) Frequency Search Search for the frequency using the REW(◀◀)/FF(▶▶) button.
5) Changing Stereo/Mono Mode Press the PLAY/STOP button to switch between stereo and mono mode. Press shortly 6) Saving Frequency In the normal mode you can save the current frequency to the preset. Search the channel number you want and press the FUNC button then the icon will appear. Press the REW(◀◀)/FF(▶▶) button to increase/decrease the channel number to use. (Press the button and hold it to increase/decrease fast.
Recording 1) Switching to the Recording Mode Press the SELECT button longer to change the mode if the mode is other than the recording mode. Use the REW(◀◀)/FF(▶▶) button to select the recording mode and press the SELECT button to enter into the Recording mode. If the current mode is audio play mode or FM radio mode, press the REC/STOP button to start voice recording. Press longer 2) Selecting Recording Source Select the recording source by selecting Record menu ⇒ Recording Source ⇒ Voice/Line In/FM Radio.
4) Voice Pause / Cancel pausing Press shortly Pause: Press the REC/STOP button while recording shortly once. Cancel pausing: Press the REC/STOP button shortly once again. 5) Voice Playback / Stop Playback: Press the PLAY/STOP button shortly once Press shortly when the player is stopped. Stop: Press the PLAY/STOP button shortly once Playback Stop ① Press the PLAY/STOP button in the recording standby state to play back the latest recording file.
MENU 1) Entering into the Menu Mode Press the SELECT button longer in the audio playback mode, FM radio or recording mode to enter into the menu mode. Press longer Press the REW(◀◀)/FF(▶▶) button to select the target main menu and then, press the +(Up)button to enter into the sub-menu of the selected main menu. Select the target sub-menu and end menu using the REW(◀◀)/FF(▶▶) button. Press the SELECT button to display the popup window for details setting.
5) Types of the end menu - There are three end menus. End menu can be classified by the button types used for setting. ① Left/Right Scroll End Menu The end menu shown left enables you to change the setting value using the REW(◀◀)/FF(▶▶) button. ② Up/Down Scroll End Menu The end menu shown left enables you to change the setting value using the +(Up)/(Down) button. ③ Multi Scroll End Menu All end menus excluding ① and ②. The end menu that uses both ① and ② as shown left.
PDF created with pdfFactory Pro trial version www.pdffactory.
Audio Menu Speed Repeat Sound Display ETC Set Speed Control File Search Play Speed Fast Skip Select the menu you want using the +(Up)/(Down) button. ■ File Search You can set file movement speed between 1 and 10 seconds, using the REW(◀◀)/FF(▶▶) button. ■ Play Speed You can set file playback speed between 50% and 150% using the REW(◀◀)/FF(▶▶) button. ■ Fast Skip You can speed up file playback by 1 times to 10 times using the REW(◀◀)/FF(▶▶) button. PDF created with pdfFactory Pro trial version www.
Repeat Repeat Shuffle Intro Select the menu you want using the +(Up)/(Down) button. ■ Repetition Press the +(Up)/-(Down) button to change the repetition mode, or press the REW (◀◀)/FF(▶▶) button to change the repetition region. Press the REC/STOP button to set the shuffle mode. ■ Shuffle You can set whether playback will be performed sequentially or randomly, using the REW(◀◀)/FF(▶▶) button.. ■ Intro You can set time duration for Intro (0 ~ 30 seconds), using the REW(◀◀)/FF(▶▶) button.
■ EQ (Normal ⇒ Rock ⇒ Jazz ⇒ Classic ⇒ Pops ⇒ User ⇒ SRS) Select the equalizer you want using the +(Up)/-(Down) button or the +(Up)/-(Down) button that fits to your bass and treble preferences. Use the REW(◀◀)/FF(▶▶) button to adjust each level of 5 bands. (Except the normal and SRS mode) ■ Balance Select the left/right balance using the REW(◀◀)/FF(▶▶) button by 20 steps (Left 0%/Right 100% ~ Left 100%/Right 0%).
■ Scroll (Method, Speed) Set the scrolling method and speed using the +(Up)/(Down) button and REW(◀◀)/FF(▶▶) button (Vertical, Horizontal, Scroll/ 1~10 seconds). ■ User UI Set the UI that will be displayed at the bottom right side of the LCD (Clock, level meter, progress bar or volume), using the +(Up)/-(Down) button. ETC Set Resume Auto Off Study Key Select the menu you want using the +(Up)/(Down) button.
FM Menu FM Set Area Set FM Rec Reservation FM Set FM Region FM Sense Select the menu you want using the +(Up)/(Down) button. ■ FM usage area (FM Band- Korea, USA, Europe, China, Japan) Set the FM frequency area and size of 1 step (50KHz or 100KHz), using the +/- button. ■ FM scanning sensitivity (FM Sense-Low, Middle, High, Auto) Set scanning sensitivity for auto scan and frequency search, using the +/- button.
Area Set FM Area Area File Select the menu you want using the +(Up)/-(Down) button. ■ ■ FM Rec Bit Rate Sample Rate REC Volume Select the menu you want using the +(Up)/-(Down) button. ■ Bit Rate ( 32, 48, 64, 80, 96, 128 Kbps) Set the recording Bit Rate, using the REW(◀ ◀)/FF(▶▶) button. ■ Sample Rate (32, 44.1 KHz) Set the recording Sample Rate, using the REW(◀◀)/FF(▶▶) button. PDF created with pdfFactory Pro trial version www.pdffactory.
■ REC Volume Set the recording Volume(0~40), using the REW(◀◀)/FF(▶▶) button. Reservation Rev. Number Rev. Day Rev. Time Rev. View Select the menu you want using the +(Up)/-(Down) button. ■ Rev. Number Set the reservation number (reservation number 1 ~ 10, 0 means "off") and the FM frequency using the REW(◀◀)/FF(▶ ▶ ) button and +(Up)/-(Down). You can switch between normal/preset mode using the REC/STOP button. ■ Rev.
REC Menu Source Voice Line -In FM Source Source Select the REC Source menu using the SELECT button. ■ Source (Voice, Line in, FM Radio) Set the recording source, using the +(Up)/-(Down) button. Voice Bitrate Sample Rate REC Sense REC Volume Select the menu you want using the +(Up)/-(Down) button. ■ Bit Rate ( 32, 48, 64, 80, 96, 128 Kbps) Set the recording Bit Rate, using the REW(◀ ◀)/FF(▶▶) button. ■ Sample Rate (32, 44.1 KHz) Set the recording Sample Rate, using the REW(◀◀)/FF(▶▶) button.
■ REC Sense Set the voice recording detection time and level using the REW(◀◀)/FF(▶▶) button and +(Up)/-(Down). Sense Time: Recording stops if the signal is received under the sense level for the specified period of time. Sense Level: Recording starts when the signal is over the specified level. ■ REC Volume Set the recording volume(0~40), using the REW(◀◀)/FF(▶▶) button.
System Menu Display System Format Time Reservation Information 장치정 Display Light Time Light Color Contrast Rotation Select the menu you want using the +(Up)/-(Down) button. ■ Light Time Set the backlight time, using the REW(◀◀)/FF(▶ ▶) button. ■ Light Color Set the backlight color by adjusting RGB color using the REW(◀◀)/FF(▶▶) button and +(Up)/-(Down). ■ Contrast Adjust brightness of the letters displayed on the LCD, using the REW(◀◀)/FF(▶▶) button.
System Language LOGO Select the menu you want using the +(Up)/-(Down) button. ■ Language Select the language you want using the +(Up)/(Down) button. ■ Logo Setting Set the user logo (usage status, logo file) using the REW(◀◀)/FF(▶▶) button and +(Up)/-(Down). Format Fast Format Normal Format Select the menu you want using the +(Up)/-(Down) button. You can decide the formatting status using the REW(◀◀)/FF(▶▶) button.
Time Clock Sleep Alarm Alarm Volume Select the menu you want using the +(Up)/-(Down) button. ■ Time Setting Set the current time using the REW( ◀ ◀ )/FF( ▶ ▶ ) button and +(Up)/-(Down). ■ Sleep Set the automatic time off during, using the REW(◀ ◀)/FF(▶▶) button. ■Alarm Set the alarm starting and ending time using the REW(◀ ◀)/FF(▶▶) button and +(Up)/-(Down). ■ Alarm Volume Set the alarm sound volume (1 ~ 40) using the REW(◀ ◀)/FF(▶▶) button. Reservation Rev. Number Rev. Day Rev. Time Rev.
Information Memory Software Select the menu you want using the +(Up)/-(Down) button. ■ Memory Size of the total, used and remained memory will be displayed. ■ Software Firmware version and data will be displayed Reset Default Music Reset Study Reset Select the menu you want using the +(Up)/-(Down) button. ■ Default You can re-configure the player using the factory default values.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
