IMPORTANT NOTICE z z z z z z z z Before operating the unit, please read these instructions carefully. Retain the manual for future reference. You are advised to follow the instructions carefully when operating the unit. Do not use any chemical solvent, clean agent or corrosive detergent to clean away dirt of the surface of the screen. By doing so, you may cause irreversible damage to the surface of the TFT screen. To clean off dirt or fingerprints, we recommend the use of a soft damp lens cleaning cloth.
MAIN FEATURES z z z z z z z z z FLIP DOWN 8.
DVD PLAYER z Supports DVD, SVCD, VCD, AUDIO CD, MP3 and MPEG video, JPEG and BMP format. MEDIA PLAYER z z z Support USB Drive: Equipped with USB Socket. Plays MPEG1 and MPEG2 format movies. (JPEG、AVI、BMP) z z Plays MP3 music. Applies to NTSC or PAL system.
CONTROLS & CONNECTORS z z z z z z z z z z POWER button: MENU button: UP/DOWN buttons: IR Sensor: Dome lights: Dome lights switch: USB port: IR transmitter: DVD player: A/V input jack: Press to turn the monitor on/off. Press menu button to active OSD feature and select OSD features Adjustment buttons IR sensor for remote control Provide additional interior illumination From front to rear OFF / AUTO / ON Plays USB Drive Transmit audio to wireless headphones.
MONITOR FUNCTION DESCRIPTIONS 1. MUTE button Press to mute the audio, press the button again to restore sound to the previous audio level. 2. MENU button Press this button to active the OSD menu screen 7 8 9 3. 4. MENU Adjust Up button MENU Adjust Down button Use this button to change the value of the menu option. 5. 6. VOLUME UP button VOLUME DOWN button Use this button to raise the volume level of the audio output. 7. SOURCE button Press to enter the GAME input mode 8.
DVD FUNCTION DESCRIPTONS 10. NUMBER buttons Allows the user to enter the numbers 0 to 10 for selection of CD track, DVD chapters, and password setting. 11. PBC button Allows the user to select the subtitle when playing the VCD 2.0 version only. 12. TITLE button Some DVDs come with title selection. For such case, allows the user to select desired title. 13. SUBTITLE button Allows the user to select a subtitle display in various languages. 14. BWD button Allows the user to search in a backward direction. 15.
23. STOP button DVD disc play will be stopped. 26 24. PAUSE button Allows the user to pause the playback. 25. ENTER button Press this button to confirm selection. 26. EJECT button Press this button to eject the DVD disc. 27. A-B button Allows the user to repeat play of a DVD or CD from point A to point B. Press button once to set point A once again to set point B. 10 28. REPEAT button Allows the user to repeat play various positions of a DVD, CD or MP3.(Track/Chapter/All) 27 11 12 13 29.
USB DRIVE FUNCTIONS DESCRIPTIONS 32. REPEAT button Allows the user to repeat play. 33. SETUP button Press to enter the SETUP MENU MAIN PAGE 34. DISPLAY button Press to display the Media Card current information. 35. ZOOM button Allows the user to zoom in or zoom out the image, press the “LEFT/RIGHT UP/DOWN” buttons to move the zoomed imaged to move in the direction of the remaining portion of the image. 36. UP button 37. LEFT button 38.
MONITOR OPERATION Slide the screen release lock forward will unlock the LCD screen and the LCD screen will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. z z z z Press the POWER button on the unit or remote to turn on the monitor. Press the SOURCE button to select viewing source. Press the MENU button to active the OSD menu shown on the LCD screen. Press the MENU button again to select the adjustment item.
OVERHEAD DOME LIGHTS The lights are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights on. The OFF position will prevent the lights from turning on at all times, and the DOOR position will allow the lights to turn on and off with the vehicle’s interior lighting. Do not leave the vehicle unattended with the dome light switch in the on position, as this could result in a discharged battery.
ADJUST DVD SETUP MENU DVD SETTING AND ADJUSTMENT ▲ ▼ This chapter describes how to set and how to adjust using the on-screen SETUP menu. Using the Setup Menu z Press the SETUP button to display the 〝SETUP 〞 menu on the display screen. z Select the main item you want using the cursor ( ) button, and then press the ▼ button. z To exit setup menu, press SETUP button on the remote again The OSD Language Menu allows the user to select the language for the on-screen display.
The DISPLAY SETUP allows you to adjust screen setting(aspect ratio) Press appropriate setting. Normal / PS This display the wide picture on the screen with a portion of the left & right side removed. Normal / LB This display the wide picture with black bands on the upper and lower portions of the screen. WIDE This display a picture with the black bands on the upper and lower portion of the screen. Then press ENTER to confirm your selection.
PARENTAL CONTROL SETTING FOR RATING This section if the SETUP Menu allows to control the content of movie playback from No Adult to View All. The Parental Control function allows you to limit viewing to your preference. 1. Use the ▼▲ buttons to select from: KID SAFE G PG PG 13 PGR R NC17 ADULT Press the Enter button to confirm the selection. 1. 2. Input a password in 4 digits using the numeric buttons then press the Enter button.
AUDIO / MP3 CDs PLAYING AUDIO CDs When playing an audio CD, It displays the current track and time for that track playing. USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: REP-ONE-repeats the track that is playing. REP-ALL-repeats the disc that is playing. REPEAT OFF The repeat option changes every time REPEAT is pressed.
SELECTING FOLDERS AND SONGS When an MP3 disc is inserted in the player, the Smart Nav screen appears automatically. You can change folders and songs through Smart Nav. The DVD player plays the songs in order they were burned on to the disc. If a disc is playing, press STOP. Press the up or down arrow button to go through the folder list on the right side of the Smart Nav Screen.
USB DRIVE OPERATION USB Socket AV Input Jacks z z z z Insert a USB Drive into the proper socket as shown on the above figure. Use caution when inserting Digital Media Card into the port. Press the DVD button on the remote control. CAUTION: USB Socket can be damaged if the wrong side is inserted or it is force in It will automatic reading files from USB. Press the “▲” or “▼” buttons to highlight the source, press the “PLAY” button to start playing your selection.
PHOTO MODE z Highlight the PHOTO mode and press the “PLAY” button to start playing your photo. Caution: If you have more than 1 photo, select your photo before press the play button, otherwise, it will start from the first photo. OTHER INFORMATION GAME PORT INPUT z z Connect your Game A/V output to the A/V input jacks. Press the “SOURCE” button on the remote control to select the GAME mode.
LIMITED ONE-YEAR WARRANTY (NON-TRANSFERABLE) Myron & Davis warrants to the original purchaser a non- transferable warranty to repair or replace, free of charge, the video product(s) in materials and workmanship under normal use and conditions for a period of one (1) year from date of purchase. Limited warranty excludes: z Labor cost for removal, reinstallation, and trouble shooting of the video product(s). z Damage to DVD discs, CDs, videotapes, accessories, or vehicle electrical parts.
Play starts, but then stops immediately 4. You’ve requested a title or chapter number that is out of range. doesn’t match, the disc can’t be played. This DVD play is Region Number 1 The disc is dirty. Clean it. Condensation has formed. Allow player to dry out. through it. The Equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules.
NOTES GM185 20
FCC INFORMATION The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference and This device must accept any interference received, including interference that many cause undesired operation.