User Manual
Table of Contents Product Features............................................................... 3 Projector Settings........................................................... 10 Keystone Adjustment............................................................................. 10 Using Touchpad................................................................. 3 Screen Rotation...................................................................................... 11 Product Mode............................
Product Features Using Touchpad For your safety, do not point the laser light directly into eyes or people. Doing so may cause serious injuries. The top surface of PicoBit is touchpad. When PicoBit is fully loaded, cursor will appear on the screen for users to control using this touchpad. 1 Tap these icons to increase and decrease Projection Aperture 1 Volume Down volume.
Product Mode 1 Charging the Device Battery Operating Time: Approx. 2 hours LED indicator - Different colors of LED indicator located below touchpad represent status of the PicoBit. Battery Charging Time: 4-5 hours • Solid Blue – PicoBit is powered on • Blinking Blue – In sleep mode To charge PicoBit : Use the supplied USB Type-C cable and power adapter to charge the device. • Green – Fully charged • Red – Charging 2 Power on – Press power switch for 3 seconds.
PicoBit Main Menu Connection Methods Miracast (WiFi Display / Smart View / Screen Sharing / Screen Mirroring) • On the default menu screen, select “WiFi Display” icon to enter WiFi display mode.
Air Pico • When device discovers “Android_XXXX”, tap to connect. • PicoBit and the desired iOS device must be connected to the same WiFi network for this feature (If there is no WiFi network available, use iOS device’s hotspot to connect PicoBit’s WiFi to the device). • After checking both devices are connected to the same WiFi network, select “Air Pico” icon on the default menu screen to enter the Air Pico mode. • Below image will be displayed upon entering Air Pico mode.
HDMI / MHL DLNA • On the default menu screen, select “HDMI/MHL” icon to enter wired connection mode. Desired mobile device must have applicable DLNA app installed and running. (Ex. ArkMC, BubblePnP, etc.) 1 Go to “Apps” icon on the default menu screen, then find “Setting” icon to check connected WiFi on PicoBit. 2 Connect to that same WiFi network on a mobile device. 3 After verifying that PicoBit and the mobile device are connected to the same network, select “Apps” icon on the main menu.
5 Go to the mobile device you wish to connect, and open up DLNA app (ex. ArkMc DLNA). Micro SD Card 6 On PicoBit, select the “Media Player” option to see the list of saved media contents in connected mobile device. • To enjoy videos or movies stored on SD card, select “Video” icon on the default menu. 7 Select your device. 8 Find an image or a video to play through PicoBit (Files saved in SD card will be not discovered). • Insert Micro SD card.
Internet Bluetooth • Go to settings and connect PicoBit to WiFi network. • To connect a Bluetooth device to PicoBit, select “Apps” icon on the default menu. • On the default menu screen, select “Internet” icon to use internet browser. • Find and select “Settings” app. • Freely use the web to do web surfing, streaming, etc. • Go to Bluetooth option and turn on Bluetooth. • Find and connect desired Bluetooth device (Bluetooth mouse, speaker, headset, etc) to PicoBit.
Android Settings Projector Settings Android Settings – Make changes to basic device settings. Pico Settings – Make changes to projector settings. All adjustments are saved as it is made. • From the main menu, select “Apps” icon. • Find and select “Settings” app. • Make changes to various settings as needed. Keystone Adjustment • Auto adjustment enables automatic keystone feature (only up and down angles). • For manual adjustment, select UP, DOWN, LEFT, and RIGHT icons to adjust screen shape as needed.
Screen Rotation Screen Setting • Select icons to change screen orientation as desired. • Custom Mode – Users can modify various screen settings as desired. - Move the pink dot controller to adjust contrast, hue, saturation, brightness of the screen as desired. • All adjustments made will be erased and reset to the default setting when the device powers off.
Laser Alignment Bi-Phase Adjustment • Select up, down, left, and right arrows to adjust Red1, Red2, Green1, Green2, and Blue lasers to align the lasers. • Use left and right arrows to align the lines. • Adjust the lines until the white lines are aligned together. • Align the lasers until the white cross lines are as thin as it can be. • Once saved, all adjustments made will remain through power cycles.
Specifications Safety Cautions Item Display Method Laser Beam Scanning Product Lifetime 14,000 hours Brightness 16:9 Throw Ratio 1.3 : 1 1920 X 720p (Upscaled HD) Color Depth 16.7 M colors (R/G/B 24bit) Maximum Image (Screen) Size Embedded OS CPU Internal Memory WiFi Bluetooth • This is a Class 3R Laser product. For your safety, please do not look directly into the laser source. Doing so may damage your eyes. 200 inches (depending on ambient light) Android 5.1.1 (Lollipop) Quadcore 1.
FCC Caution Product Certifications Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RoHS IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
The MIT License (MIT) Warranty Copyright (c) Sergey Ryazanov (http://home.onego.ru/~ryazanov) Celluon warrants this product to be free from defects in materials and workmanship under normal use for a period of one (1) year from the date of purchase, as evidenced by the receipt of purchase.
Celluon, Inc. 232, Gongneung-ro, SeoulTechno Park #701, Nowon-gu, Seoul, korea (01811) www.celluon.com sales@celluon.com support@celluon.