User Manual
Table of Contents 1. Safety Precautions FCC Compliance Information FCC Class Notice FCC Caution FCC RF Radiation Exposure Statement Industry Canada Statement CE Caution IEC-60825-1 Caution 2. Certifications 3. Environmentally Friendly Disposal and Recycling 4. Package Contents 5. Product Features 6. Identifying Parts 7. Connecting PicoAir a. Compatible Operating Systems b. How to Connect c. Switching Connection Mode 8. Making Adjustments a. Volume Adjustment b. Speaker / Earphone Usage c.
1. Safety Precautions This product is not waterproof – avoid using it near water or wet places. There is a risk of malfunction if product is used in places where sudden or extreme temperature changes occur. Applying excessive force or impact to this product may result in product damage, and will void warranty. Never attempt to disassemble or service this product yourself. Doing so can result in electrical shock and void warranty. This is a Class 3R Laser product.
Industry Canada Statement This device complies with Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. CE Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
3. Environmentally Friendly Disposal and Recycling To protect the environment, dispose this product separately from household waste once it has reached its end of life, or take it to your local electronic waste disposal center. Built-in Battery Battery Type Rechargeable Lithium-ion Polymer Battery Battery Operating Time Approx. 150 minutes (with continuous use) Battery Capacity 3140 mAh @ 3.7V Charging the Battery Use supplied USB power adapter to begin charging the battery.
5. Product Features PicoAir is a laser-based pico projector that easily fits in your pocket for superior portability. It allows you to project contents in your mobile devices onto any surface via Miracast or DLNA capability.
6. Identifying Parts Touch-sensitive Volume Down Touch-sensitive Volume Up Reset Button Backlit Battery Indicator Light Speaker FCC ID : TCLPICOAIR IC : 10211A-PICOAIR Model : PicoAir 3.5mm Audio Out Miracast or DLNA Switch CHARGE – Micro USB port for charging Battery Status Indicator Power Button Select Button CE1177 DC : 5V 2A KC : MSIP-CMM-CLK-PICOAIR Celluon, Inc.
7. Connecting PicoAir a. Compatible Operating Systems For Wireless Connection Miracast Android OS 4.2 or later Windows OS 8.1 or higher Any OS that supports Screen Mirroring functionality b. How to Connect DLNA Any digital devices that support DLNA protocol * Using DLNA connection requires downloading DLNA streaming app from the App Store or Play Store. M/D Using Miracast : The Miracast capability is called different names on difference devices.
4. On a desired mobile device, find and select Screen Mirroring / Media Output. 5. Mobile device will search for nearby devices to connect. 6. When device discovers “Celluon PicoAir”, tab to connect. 7. Mobile device will say “Connected” and PicoAir will start mirroring display. * It is recommended to disconnect any previously connected WiFi network before attempting to connect via Miracast (screen mirroring).
M/D Using DLNA : * To connect to devices using DLNA capability, you must install a DLNA streaming app (i.e. iMediaShare) on your mobile device. Apps can be downloaded from AppStore/GooglePlay. 1. Turn on PicoAir by pressing power button and holding for 2-3 seconds. 2. Celluon logo will display upon powering on, followed by a "Preparing wireless connection" screen. 4. DLNA “Ready to Connect” screen will display upon completion of mode switch. 3.
*** For DLNA connection with iOS devices: 1. Follow above steps 1-9. C. Switching Connection Mode - Use the sliding mode switch located next to the micro USB charge port to change connection mode. 8. Making Adjustments Volume Adjustment *Volume is controlled directly from PicoAir. Locate touch volume control area on top of device. Adjust the volume by lightly touching the + or – pattern. Speaker / Earphone Usage Please connect a speaker or an earphone to the 3.5mm audio out jack.
9. Charging the PicoAir Charging Time Operating Time 4-5 hours 2.5 to 3 hours with continuous use Battery Status LED Indicator Status Description 0% charged Volume control + & - sensors will blink to indicate low battery status 25% charged First LED indicator remains solid. When charging at this stage, the next LED indicator will blink to indicate it is being charged. 50% charged First two LED indicators remain solid.
10. Troubleshooting Mobile device cannot find Celluon PicoAir during Miracast connection search Please make sure PicoAir is on Miracast mode. This may also be due to a particularly heavy wireless traffic. If this is the case, please reset the device by pressing the reset button on the back of device. Cannot stream contents through DLNA application Please make sure device’s WiFi is properly connected to PicoAir’s WiFi.
11. Specifications Item Display Performance Spec. Display Method Laser Product Lifetime 10,000 hours Brightness 30 ANSI lumens Aspect ratio 16:9 Throw Ratio 1.1 Sequential Contrast Ratio 80,000 : 1 Resolution 1920 x 720p Remark The perceived brightness of laser projectors with a given ANSI brightness is 50%+ higher than that of the LED based projectors HD resolution Color Depth 1.67M colors (RGB 24bit) Focus Focus Free (always in focus) No focus wheel required Max.
12. Warranty Celluon warrants this product to be free from defects in materials and workmanship under normal use for a period of one (1) year from the date of purchase, as evidenced by the receipt of purchase. During the warranty period, Celluon shall repair or replace the product if defective. If replaced, the replacement shall be with a product of equal or greater value. This warranty is limited to the purchaser and is not transferable. Please contact support@celluon.