User's Manual
Table Of Contents
- Copyrightⓒ 2011
- All rights reserved by CELLUON, INC.
- All page contents are properties of CELLUON, INC.
- ■ CELLUON, INC. & evoMouse®, Magic Cube are registered trademark of CELLUON, INC.
- All other products are trademarks or registered of their respective companies.
- ■ Please refer to host device instruction manual for Bluetooth pairing information.
- Safety Precautions
- 1. Avoid exposing this product to direct sunlight for extended periods of time, and keep it away from heat sources.
- 2. There is a risk of malfunction if product is used in places where sudden or extreme temperature changes occur.
- 3. Applying excessive force or impact to this product may result in product damage, and will void warranty.
- 4. To ensure safety and prevent damage, use only the dedicated mini-USB to USB cable supplied with this product.
- 5. Never attempt to disassemble or service this product yourself. Doing so can result in electrical shock and will void the warranty.
- 6. This Class 1 laser product is certified by FDA safety regulation. For your safety, please do not stare directly into the laser source. Doing so could damage your eyes.
- 7. Avoid placing any object within the space between the main unit and the laser projection keyboard layout.
- 8. Please do not use this product on uneven or irregular surfaces. Place the product on a flat surface. Avoid table or surface that is as transparent or reflective as glass or mirror.
- .
- Rechargeable Li-ion Battery:
- ■ Battery Operating Time: Approx. 150 minutes (with continuous use)
- Capacity: 700mAh (Max)@3.7V
- ■ Charging the Battery: Use supplied USB cable to begin charging the battery.
- When the charging is complete, battery status LED turns green.
- ■ Charging Time: Approx.180 minutes
- /
- Cautions
- 1. For safety reasons, be sure to use only the mini USB to USB cable specified for this product.
- 2. Make sure to fully charge the battery before using the product for the first time.
- 3. Battery charging times may vary slightly depending on the ambient temperature.
- 4. The battery may not be charge to 100 percent of its rated cell capacity even when the battery status LED indicates green light.
- 5. Using or storing the battery in high temperature, humidity and pressure environments may cause the battery to explode.
- 6. Since the battery is a consumable item, its storage capacity decreases gradually as time passes.
- 1. Product Features
- - English QWERTY keyboard layout.
- - Compact size for portability – perfect for on-the-go
- - Function icons and shortcut keys for ease of operation
- - Non-mechanical optical mechanism for superior durability
- - Built-in Lithium-ion rechargeable battery for mobility and convenience
- - Compatible with latest devices: Window XP/Vista/7, Windows Phone 7, iOS4
- (iPhone3GS/4, iPad), and Android 2.2 or higher
- - Projection Keyboard
- - USB Cable
- - User’s guide
- 3. How this Product Works
- This product emits infrared light from the lower end of the product to detect objects such as fingers. When an object passes through the area illuminated by the infrared light source, any infrared light reflecting off the object is detected by the sen...
- Sensitivity: difference in thickness, shape, and color of the user’s fingers or operating environment result in differences in the amount of reflected infrared light. If the amount of reflected infrared light is appropriate, the sensor will have no pr...
- (Hovering: keystroke is recognized before your finger touches the projection surface.)
- Therefore, it is necessary to compensate for differences in finger characteristics or operating environment, and this can be accomplished by adjusting the sensitivity of your projection keyboard.
- Given the same amount of reflected infrared light, increasing the sensitivity will produce the effect of a higher amount of reflection, whereas decreasing the sensitivity will produce the effect of a lower amount of reflection.
- With the sensitivity set to its minimum value, repeatedly press a key that is relatively far from the sensor (Spacebar, CTRL, etc.) to increase the sensitivity. As soon as your keystroke is recognized, stop adjusting the sensitivity and set the final ...
- 1. Avoid direct sunlight
- 2. Avoid low color temperature light source, such as tungsten, halogen, or incandescent lamp is used.
- 3. Avoid uneven or irregular surfaces. Place the product on flat surfaces.
- 4. Avoid a table or surface that is as transparent or reflective as glass or mirror.
- 5. Avoid placing any objects within the space between the main unit and the laser projected keyboard layout.
- Note: Because this product uses infrared rays, strong infrared radiation from direct or reflected sunlight or from tungsten (halogen or incandescent) lighting may cause operating error.
- Caution: Although this equipment is classified as Class 1 laser product, for your safety, do not directly expose your eyes to pattern projection beams or infrared rays.
- 4. Identifying Parts and their Functions.
- (1) Projector: Uses a red laser to project the image of a keyboard onto a flat surface in front of the typist.
- (2) Sensor: Picks up the infrared light reflected off the typist’s fingers and triangulates the location of the reflected light to determine which key was pressed. This sensor provides a keyboard function.
- (3) IR Light Window: Uses an infrared laser to emit an invisible plane of light a few millimeters above the projection surface so that the infrared light can be reflected off of the typist’s fingers to the sensor.
- Caution: If one or more of the above modules are blocked by some cause, the projected keyboard image may not be displayed correctly or, the location and movement of the typist’s fingers may not be recognize correctly.
- Rear View
