2 1. Multi-Function Button (MFB) 2. Sound Previous 3. Sound Next 4. Frequency Up 5. Frequency Down 6. Built-in Mic 7. Blue LED 8. Multi-Purpose USB Port(14 pins) for Audio-in/out & Charge 9. USB Charge Port for Handset & MP3 (5V, 400mAH) 10. Detachable Cigarette Lighter Plug 11. Audio-In Adaptor (Optional) 12. Reset LCD Display 1 2 3 4 1. Bluetooth symbol 2. Connection to Line 1 3. Connection to Line 2 5 4. Battery Power 5.
Bluetooth FM Transmitter Car Kit About Bluetooth FM Transmitter Car Kit #BTF-S1A1X ◆ Unlimited Every Frequency Selection - (FM 88.1MHZ - 107.9MHZ) , w/Versatile LCD indication gives you best convenience of channel selection for different areas. ◆ Smallest size with built-in A2DP & AVRCP gives you powerful audio streaming in stereo quality you’ ve never dreamed of. ◆ Built-in D.S.P. for echo cancellation and noise suppression gives you impeccable call quality.
charging, you may leave your car kit powered off. This car kit is dual-charge enabled, please follow the simple steps: (1)Cigarette Lighter Plug: Connect the cigarette lighter plug to the car kit and plug the unit to the vehicle cigarette lighter hole. (2)Multi-Purpose USB Port: Connect the optional plug-in saver/charger (or travel charger) to the multi-purpose USB port and plug the saver/charger (or travel charger) to the cigarette lighter hole (or wall outlet).
(b) Car kit will be under standby mode. Within 10 minutes, if it’s not connected to any Bluetooth devices, it’ll power off. Important: Under standby mode, various situations could be encountered. They are categorized as follows. Please refer to descriptions under Bluetooth pairing & link for details. (a) The FM frequency of car kit and vehicle stereo (or home) is pre-set to the same channel : You may hear a short beep from the vehicle (or home stereo) speaker. The LCD will display .
It’ s now ready for pairing. (d) Activate your handset’ s Bluetooth accessing function by referring to your handset user guide for details. Meanwhile, the handset will search for accessible Bluetooth devices. (e) Select “BTF -S1A1X” from the list. Enter the pre-programmed passkey “0000” and press “ OK” to pair the car kit and the handset. When pairing is completed, the LED will flash on for 3 seconds and LCD will display .
car kit, and Bluetooth connection will be obtained automatically with the headset icon of variation of different handsets, if you don’t see the headset icon the headset icon flashes on. Because , please press the MFB once until you see . A3) Disconnection/Link to the Mobile Handset You may connect your car kit to another Bluetooth handset. Please follow the simple steps to disconnect to the previous paired handset. (a) With your car kit: Press the MFB for 5 seconds(approx.
When you hear the ringing tone from the stereo speaker, press the MFB once to answer the call or answer the call via your mobile handset in the normal way. Because of variations of handsets, answer a call via your handset could transfer the call to handset, for example: Samsung D908. To transfer the call to car kit, press the MFB once. The LCD will display . (c)Call End: Press the MFB once to end the call or end the call via your mobile handset in the normal way. Car kit will be under standby mode.
(1)Car kit to Handset:：Press and hold the buttons simultaneously once and LCD will display . (2)Handset to Car kit：Press the MFB once and LCD will display . Important: The function is only accessible with those handsets with Hands-Free Profile. (h)Music Play & Pause: After completion of Bluetooth connection with your A2DP handset and car kit is under standby mode, you may enjoy music streaming from your handset via stereo speaker. The LCD will display .
Important: If the car kit is in use, for example: Calling, you don’t need to tune the channel to activate the FM transmitting function. (3)Initiate music streaming from your MP3. Important: As the music source is not Bluetooth enabled, the MFB of this Bluetooth car cannot activate MP3’s music streaming.
(b) Ensure the car kit is under off mode. (c) Initiate the IVT “BlueSoleil” on your PC. Connect the dongle to your PC USB port and double click to the . (To initiate the IVT “BlueSoleil” software, please refer to your dongle instruction manual.) Mean while, the “BlueSoleil” operation window and will be on your PC screen . (d) Press and hold the MFB for 6 seconds (approx.) until the LED flashes on. It’ s now ready for pairing and the LCD will display .
(g) Click to the symbol of the desired function, for example: Bluetooth headset and in the pop out window, enter the pre-programmed passkey “0000”. (h) Press “OK” to pair to the car kit. (1)When pairing is in process, you may see both the BTF-S1A1X & Bluetooth headset symbols turn into green and a dotted line in between the BTF-S1A1X & center yellow sphere. (2)When pairing is completed, the car kit LCD will first display the name of this PC. To complete Bluetooth link, please press the MFB once.
(j)To enjoy PC’s music streaming via your car kit, please follow the simple steps: (1) In step (g), click the Bluetooth AV symbol. (Do not click the Bluetooth headset symbol) (2)Activate audio playing with your PC’s “Windows Media Player”. (To initiate the “Windows Media Player”, please ensure the “Bluetooth AV/HS Audio” is switched on in your PC sound card.) Important: (a)Prior to pair your dongle with this car kit, please ensure the previous Bluetooth connection to other device is removed.
display . (e) The dongle will initiate pairing and connection to the car kit. Once connection is completed, the car kit LCD will display with LED first flashes on for 1 second and then flashes every 15 seconds. (f) Tune the FM frequency of car kit & vehicle (or home) stereo to the same channel. Activate audio playing with your PC’s “Windows Media Player”. (To initiate the “Windows Media Player”, please ensure the “Bluetooth AV/HS Audio” is switched on in your PC sound card.
are using other dongles of which password is multiple, please ensure “0000” is one of them. Please refer to its instruction. (a) Plug the dongle to your audio device and power on your audio dongle. (b) Place the car kit and dongle no more than 1 meter apart. (c) Ensure the car kit is under off mode. (d) Initiate the dongle’s pairing function. (To use your dongle, please refer to your dongle instruction manual.) (e) Press and hold the MFB for 5 seconds (approx.) until the LED flashes on.
Buttons & Sound Indication: Sound Indication Buttons Functions Operation from Stereo Speaker MFB Power on Under off mode, press & hold for 3 seconds 1 beep Power Off Under s tandby mode, press and hold for 5 1 beep seconds Pairing Under off mode, press & hold for 6 seconds 2 beeps Call Answer Press 1 time Call End Press 1 time Last Number Redial Press twice Call Reject Press and hold for 3 seconds 1 beep Call Transfer Press 1 time 1 beep 1 beep from Handset to Car kit Re-Connectio
LED & Sound Indication: Car kit Status Blue LED Sound Indication from Stereo Speaker Power On Flash on for 3 seconds 1 beep Power Off Flash on for 3 seconds 1 beep Standby Flash on every 3 seconds Calling in Process Flash on every 15 seconds Mute Flash on constantly 3 beeps every 30 seconds Pairing in Process Flash on constantly 2 beeps Pairing Completed Flash slowly 1 beep Low Voltage Same as LED indication under current status 2 beeps every 30 seconds Care and Maintenance (a) Plea
Safety Information (a) Check local laws regarding use of a mobile handset and car kit while driving. If you use the car kit while diving, ensure your attention and focus remains on your responsibility of driving safety. (b) Never allow children to play with the car kit. Small parts may be a choking hazard. (c) Observe all signs that require an electrical device or RF radio product to be switched off in the designated areas.
Multi-Purpose USB Port : 14 pins, mini USB for charge, Audio in & Audio out Cigarette Lighter Plug : Detachable with built-in 4-pin USB port for handset & MP3 charge, 5v, 400 mA Plug-in Saver/Charger : DC 5 to 5.5 V, 300 mA, 14-pin USB connector Normal Charge Time : 3 to 4 hrs.(approx.) Talk Time : 4 to 5 hrs.(approx.) Standby Time : 120 hrs.(approx.) Dimension(L/W/H) Weight :12.6x4.7x1.6cm. : 80 g. 'Hereby, Celltrend International Co.
FCC INFORMATION The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
