S3031A USER MANUAL 1
IMPORTANT SAFETY INSTRUCTIONS ................................................................................................. 3 PRECAUTIONS ................................................................................................................................... 4 Functions & Controls ......................................................................................................................... 4 Whats inside the box : ....................................................................
IMPORTANT SAFETY INSTRUCTIONS This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. All the safety and operating instructions should be read before operating this product and retained for further reference. All warnings on the appliance and in the operating instructions should be adhered to.
PRECAUTIONS Security Before operation, check if the voltage of this product is in line with the local voltage. Hold the plug to disconnect it from the mains outlet. Do not pull the power cord. Disconnect the plug as soon as liquid or objects enter this product. Discontinue use of this product until it has been tested and verified by a qualified service technician. Location Place this product on dry stable surface away from heat and damp and where it is unlikely to fall or be knocked over.
Overview of controls - Unit 1． 2． 3． 4． 5． 6． 7． 8． 9． 10. COAX-- Connect the digital audio output from a TV, DVD or Blu-ray player LINE-- Connect to an analog (Headphone) audio output on the TV or an analog device POWER -- Switch the Soundbar on or off (to standby). SOURCE -- Select the audio source among LINE /COAXIAL/BLUETOOTH. MODE -- Select the sound mode among Movie /Music / Direct/ News.
Overview of controls - Remote control 11. Power Button：Switch the Soundbar on or off (to standby). 12. Source Buttons : Select an audio source from LINE,COAX, BLUETOOTH inputs 13. VOL +/- : Increase or decrease the volume output. 14. SOUND EQ MODES：Press repeatedly to cycle through the available sound Audio modes: MOVIE, MUSIC,DIRECT or NEWS.
1. Connect one end of the 3.5mm audio cable (supplied) to the headphone output of your MP3 player or TV. 2. Connect the other end to the AUX input (3.5mm socket) on the right side of the Sound bar Getting started Connecting mains power 1. Connect the attached mains plug to a mains power supply socket. 2. Switch the power socket ON. Installing batteries in the remote The first time you operate the remote control, please pull out the safety strip to activate the battery. 1.
3. Close the battery compartment. Notes: • Remove the batteries from the remote control when not in use for a long period of time. • Do not install new batteries with used ones and do not mix different types of batteries. • Dispose of batteries in accordance with local regulations. General operation 1. Ensure the sound bar is powered ON. If not, press the STANDBY button on the sound bar (3) or remote (11). 2. Press SOURCE button ( 4 Unit or12 remote) repeatedly to choose the correct audio inputs.
3. Turn on Bluetooth function on your device, search for and select BT Soundbar If connection is successful, the unit beeps and the LED light up stably. If the pairing can not be completed within one minute, the LED flashes slowly. ● Select and play audio files or music on your Bluetooth device. ● During play, if a call is incoming, music play is paused. Play resumes when the call ends. ● You can also operate the playback using the remote control. To play, press on the remote control.
3. Insert 2 screws (not supplied) into the holes and tighten. Take care to leave 5mm between the screw heads and the wall. NOTE: You will need to ensure the screws are long enough to sufficiently grip the wall while allowing 5mm between screw head and the wall. 4. Hook the Sound bar onto the screw heads. For secure mounting ensure the screw heads slide firmly into the narrow part of the brackets.
Troubleshooting If the problem persists, contact the retailer if the soundbar is still under guarantee. PROBLEM POSSIBLE SOLUTION No Power • Ensure the mains plug is connected to a power supply, and is switched ON. • Make sure there is power to the mains socket. No Sound • Make sure if playing from the AUX input, the external source has the volume turned up and is playing a track. • Make sure the volume is turned up.
Operating Temperature 41F – 95F Compliances FCC 12
