User's Manual

ManualsBrandsCellink ManualsComputers & AccessoriesBluetooth USB Adapter

Package Contents

Bluetooth USB Adapter

Installation Software CDROM

¾ Setup programs and drivers for Microsoft Windows 98 SE, ME, 2000, and XP

¾ README.TXT with updating information for BT USB Adapter

 Users’ Manual

Introduction

Bluetooth USB Adapter is a Bluetooth enabler, that enables your desktop or notebook

computer to connect wirelessly to any other Bluetooth enabled computers and devices. It

allows a working range of up to 10 meters (33 feet) with a 723 Kbps data rate transmission,

and complies with Bluetooth 1.2 and USB 1.1 specifications. Bluetooth USB Adapter is an

ideal solution for home and mobile networking needs. It is easy to install and use for wireless

connectivity to such as cellular phones, PDAs, printers, computers, keyboards, mice etc.

Overview

Bluetooth is a low-power wireless networking standard, which uses short radio links to allow

electronic devices to communicate with other without using cables.

The following services are supported by Bluetooth technology:

x Synchronize your Bluetooth PDA with your computer.

x Send your business cad to anyone who has a Bluetooth enabled device.

x Send or receive files to or from anyone who has a Bluetooth enabled device.

x Send an e-mail without being wired to the network.

x Dial up to internet on your computer over your Bluetooth cellular phone.

x Send a fax from your computer over your Bluetooth cellular phone.

x Chat with anyone who has a Bluetooth enable computer.

x Play a one-on-one serial game without a cable.

Most Bluetooth enabled devices may act as:

x A Bluetooth host – can provide one or more services, such as access to the internet or to

other Bluetooth devices.

x A Bluetooth client – can use the service provided by Bluetooth servers.

x Bluetooth devices can act as both host and client, and do both at the same time.

Summary of content (25 pages)

PAGE 1
Package Contents Bluetooth USB Adapter Installation Software CDROM ¾ Setup programs and drivers for Microsoft Windows 98 SE, ME, 2000, and XP ¾ README.TXT with updating information for BT USB Adapter Users’ Manual Introduction Bluetooth USB Adapter is a Bluetooth enabler, that enables your desktop or notebook computer to connect wirelessly to any other Bluetooth enabled computers and devices.
PAGE 2
System Requirement PC System Requirement: CPU: Intel Pentium III 500MHz or above. Memory: 256MB or more. Hard disk space: at least 50MB. OS: Windows 98SE/Me/2000/XP A free USB port, USB 1.1 compliant. CD-ROM Drive. Mac System Requirement: MAC OS: 10.1.4 or later Mac OS driver and software provided by Apple. A free USB port, USB 1.1 compliant. CD-ROM Drive.
PAGE 3
Software Installation Note: Do not plug your Bluetooth USB Adapter into USB port until you have completed the software installation as the following: 1. Insert the software CD cams with your USB adapter. The “InstallShield Wizard” should automatically start running. If it doesn’t load, run its “Setup.exe” file. 2. A window appears for you to choose your preferred language for this installation. Click OK to continue. 3. Wait for the setup preparation.
PAGE 4
. The IVT BlueSoleil Setup window should now appear, Click “Next”. 5. Select “Yes” to proceed with the installation.
PAGE 5
6. Click “Yes” to accept License Agreement. 7. Click “Next” to install the driver to the default folder. Click “Browse” and select another folder if you wish to relocate your driver.
PAGE 6
8. Wait for the setup. 9. Wait for Bluetooth device installation.
PAGE 7
10. Check “Yes” and click “Finish” to restart your computer.
PAGE 8
Hardware Installation Install USB Adapter 1. Insert the USB dongle into a free USB port after installing the driver and restarting your computer. You will see a system notice of “new USB devices found”. Click “Next” to register. To boot from a different location, mark “install from a list or specific location” and click “Next” to continue.
PAGE 9
2. Wait while the wizard searches for your USB dongle. 3. Click on “Finish” while the search is completed.
PAGE 10
Pairing Guide What’s pairing? Pairing is a process of associating Bluetooth devices with each other. It allows avoiding entering access information every time when a connection is requested. Bluetooth devices need to be paired with each other before attempting a connection at first time. Paired devices will remain paired, even if: 1. One of the devices is un-powered. 2. A service connection is interrupted or stopped. 3. One or both devices are rebooted.
PAGE 11
Connect and Disconnect Connect There are two ways to setup a Bluetooth connection. Select Remote Device First Select a remote device and double click it to refresh its services. Bluetooth passkey may be asked if security level of either side of the connection is set to High and they are not paired devices. After service searching finished, the services that the remote device supports are found and the corresponding service icons on the top of the main window will change to be pink color.
PAGE 12
some remote devices, the device that supports the service will be highlighted in yellow. Double click the remote browse first to check whether the device has the service and then connect to it. If the remote device does not have the service, connection will fail. The Bluetooth passkey may be asked if the security level of either side of the connection is set to High and they are not paired devices. Note: There are corresponding operation menu on the remote device icon and the service icon.
PAGE 13
An example to use “BlueSoleil” program, please follow the instructions below: 1. Click the Bluetooth Icon located right hand side of the taskbar to open “BlueSoleil” program. Or click “BlueSoleil” on your screen. 2. The main window of IVT BlueSoleil should appear on the screen.
PAGE 14
3. Click on the “Sun” icon of the solar system to see your available Bluetooth devices. Or click “My Bluetooth” and select “Bluetooth Device Discovery” to perform search.
PAGE 15
4. Wait while search performing. 5. 15 While the search is done, scroll up and down to find the devices you are looking for.
PAGE 16
6. Right click the device icon and select “Pair Device”. 7. Enter your preferred passkey on the screen and click OK. You will now be asked to enter the same passkey to your client device to complete “pairing”.
PAGE 17
8. While Bluetooth connection is established between devices, the device icon should appear with a red “¥” to indicate completion of pairing and connecting. 9. As long as the connection between devices is built, it will last permanently. In other words, the connection will be auto-established whenever the Windows runs. 10. Click “Yes”, if you wish to create a shortcut for this connection on your desktop in the future.
PAGE 18
11. You may continue to pair as many devices as you desire, and connect up to 7 devices at once.
PAGE 19
How to un-pair devices? In the main window of BlueSoleil, right click a paired device; select Un-pair from the pop up menu.
PAGE 20
Chapter for Mac Users: How to add Bluetooth to your Mac? IMPORTANT INFORMATION FOR MAX OS X USERS: Bluetooth support for Mac OS X is still in development but will be supported natively with the full release of Mac OS X Version 10.2. As of now, the beta drivers for Bluetooth support can be downloaded from the Apple website at http://www.apple.com. To enable Bluetooth on your Mac is as following: 1. Download and install the Technology Preview 2 software. (Double-click “Apple Bluetooth.pkg.”) 2.
PAGE 21
Technical Support For support of your other Bluetooth devices, contact your device manufacturer.
PAGE 22
Specification of Bluetooth USB Adapter Standard Bluetooth 1.2, Class II Frequency Band Interface 2.40 ~ 2.4835 GHz Unlicensed ISM band USB 1.1 Sensitivity -80dBm @0.1%BER Transmission Power Data Speed m ~ -6 dBm -3 Up to 723 kbps Operation Temperature -10~55 degree Celsius Humidity DC Power 10% ~ 90% non-condensing 5V (from USB) Power Consumption 35mA Operating Range Package Dimensions 10 meters (33 feet) 14.5*20.5*5 mm Dimension 6.9*1.9*0.
PAGE 23
CE Statements This device has bee tested and found to comply with the requirements set up in the council directive on the approximation of the law of member states relating to EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC and R&TTE Directive 99/5/EC. FCC Safety Statements This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept m\any interference received, including int
PAGE 24
Regulatory Information Bluetooth This equipment is qualified according to Bluetooth Core Specification, version 1.2 Special notices for use in France and Italy: France Dispositif a’ faible puissance (imW), pas de limitation pour son usage a’ l’interieur ou a’ l’exterieur. Low power device (1mW), no limitation for indoor or outdoor use. Italy E’ necessaria la concessione ministeriale anche per l’useo Verifcare con I rivenditori la procedura da seguire. License required for use.
PAGE 25
Warranty The manufacturer warrants that the Bluetooth USB Adapter shall conform to their published specifications, which maybe subject to change, and remain free from defects in materials and workmanship under normal, proper and intended use within warranty period, provide that proof of purchase be furnished with any returned equipment.