User’s Manual For 27MHz Wireless Mouse OPM-302-E OPM-602-E
Battery Installation 1. Remove the battery compartment cover on your mouse by pressing the central of the mouse and slid away the cap. (Fig. 1, 1-1) 2. Put 2 AAA Alkaline batteries as their proper polarities. (Fig. 1-2) 3. Push the cap back till you hear a click. ! Caution Insure of the proper polarity of batteries. Insure of the battery type. (AAA, Alkaline 1.5 V) Always take out the battery before a long-period storage. Hardware Installation 1.
Note: Users are required to do pairing again when every time you change the receivers. Program mouse buttons You may go to control panel and click on the “mouse” icon, or double click the mouse icon on the task bar to program your mouse buttons. Setup for multiple users If you have two or more RF mice, you may setup the second user 30 seconds after setting up for the first user to avoid the interference. Environment The following may shorten the effective distance or drop the performance: 1.
The radiated output power is far below the FCC Radio frequency exposure limits. Nevertheless, this device should be used in such a manner that the potential for human contact during normal operation is minimized. Warning: Changes or modifications made to this equipment not expressly approved by the manufacturer. May void the FCC authorization to operate this equipment. Important.