User’s Manual For 2.
Introduction Thank you for purchasing this 2.4 GHz wireless optical mouse. You are about to experience the superior speed and the excellent performance it brings to you. This RF Wireless optical mouse is designed compact and portable with the goal of eliminating bothersome cables and maximize your working space anytime anywhere. It cordlessly works up to 10 meters from your PC or laptops. The 2.4GHz frequency, 82 channels and 65,000 sets IDs will prevent your mouse being interfered by other RF products.
Battery placement 1. Gently press the button and lift up the cap from its side indicated in the following diagram. Press to open Lift to open 2. Place batteries in their proper polarities. 3. To save battery power, turn off the mouse while traveling or when you’re not using it. To turn off the mouse, slide the on/off switch at the bottom of the mouse. Power on/off ! Caution l Follow the battery polarity markers to ensure the proper polarity. l Insure of the battery type. (AAA, Alkaline 1.
Hardware Installation 1. Connect the mini receiver to any available USB port. (Fig. 2-1) Refer to the following diagram for instruction. 2. Switch on the mouse. (Fig.
Driver Installation Note: Your mouse is able to function properly without installing the software. Install this driver CDROM only if necessary. Note: Go to “Control Panel:/setup.exe”.
Pairing 1. Press the receiver “connect” button shown below. And Its LED will light up. (Fig. 5) 2. Press the mouse “connect” button. (Fig. 5) Receiver connect button. Press it firstly. Receiver connect button. Press it firstly. 3. The LED of the receiver is off when the mouse is functional. If not, re-do pairing (step 1 and 2). 4. Re-do pairing whenever you change batteries, remove the battery cap or change another receiver.
Customize your mouse settings Click “Mouse” in your control panel, or click the mouse icon on the task bar to program your mouse buttons. Setup for multiple users If you have two or more RF mice, you may setup the second user 30 seconds after setting up the first user to avoid interference. Environment The following conditions may shorten the effective distance or drop the performance: 1. To avoid using RF mouse on a metal, reflecting or half tone painted surface.
Warning: Changes or modifications made to this equipment not expressly approved by the manufacturer. May void the FCC authorization to operate this equipment. Important. Please note the following: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Product Specification: Product Operation Frequency OPM-6324 2402-2483MHz RF wireless Sensor Optical Resolution 800 dpi Buttons Numbers of ID Channels 2 buttons with scrolling wheel 65,000 user’s ID 82 Channels Mechanical Life 100 miles Switch Life 1,000,000 Power Consumption RF Output Power Power Supply Transmission Range Weight Dimension Interface Working mode < 21mA, Standby mode < 200uA < 1 mW 2 * AAA Alkaline batteries 10 Meters+ 46.2 g 86.00*47.9*26.9 mm USB 1.