CELL COMMAND, INC. HIGH SECURITY BEACONS Instruction Manual Model CCICWE2 FCC ID: 2ASUA-CCICWE2 http://cellcommand.tech +1 (770) 652-4517 Page 1 2019 © Cell Command, Inc.
Instruction Manual Model CCICWE2 FCC ID: 2ASUA-CCICWE2 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance.
Instruction Manual Model CCICWE2 Introduction: The Cell Command Beacons are high security precision transmit devices designed to work in conjunction with Cell Command’s high security cell phone protocols. The CCI Beacons are low power, limited range devices designed to trigger a specific protocol instruction to limit certain device functionality in a mobile phone within a well defined area or environment. The CCI beacons are smart devices and precisely configurable for trained technicians.
Instruction Manual Model CCICWE2 CONFIGURABLE PARAMETERS: The CCI BEACONS have ten parameters which can individually be configured by a trained technician: UUID, MAJOR, MINOR, MEASURED DISTANCE, TRANSMISSION POWER, BROADCASTING INTERVAL, SERIAL ID, BEACON NAME, CONNECTION MODE, PASSWORD. 2.
Instruction Manual Model CCICWE2 CONFIGURABLE PARAMETERS UUID - Universally Unique Identifier. It contains 32 hexadecimal digits, split into 5 groups, separated by hyphens. Each of the 5 groups must contain the following number of characters per section: First section: 8; Second section: 4; Third section: 4; Fourth section: 4; Fifth section: 12. Characters should be numbers from 0 - 9, or letters from A to F. A group can be made entirely of just numbers or letters or a combination of both.
Instruction Manual Model CCICWE2 3. CHANGING THE PARAMETERS: 3.1 With the CCI Beacon app open showing the list of devices (as shown in figure 3 below), click on the device you would like to modify. A CONFIG screen should appear listing the configurable items as shown in Figure 4 below. DEVICES CONFIG Name major minor CCI Beacon_014 MAC: AC:23:3F:26:5E:EC 0 0 YES 17.