Instructions / Assembly

Instructions and Assembly – H-Burner Kits

Working with Natural Gas can be complicated and dangerous. All connections and fittings

should be made by a licensed gas installer.

Parts Included:

1. H-Burner 2. Flex Line 3. Damper Clamp

4. Elbow Adapter 5. Female to Flared Connector

PAGE 1
Instructions and Assembly – H-Burner Kits Working with Natural Gas can be complicated and dangerous. All connections and fittings should be made by a licensed gas installer. Parts Included: 1. H-Burner 4. Elbow Adapter 2. Flex Line 3. Damper Clamp 5.
PAGE 2
Instructions - Apply your Damper clamp (part 3) to the flue - Add pipe compound or yellow Teflon tape to the gas stub in your fireplace before installing the elbow adapter (part 4). Use a wrench to tighten and the male flared end should be facing the back of your fireplace - Add pipe compound or yellow Teflon tape to the threads of your H-Burner (part 1) before connecting your female to flared connector (part 5). Use a wrench to tighten - Connect the Flex line (part 2) to the elbow adapter (part 1).