Instructions / Assembly

Table Of Contents

For additional support visit: https://support.CelestialFireGlass.com

Typical Conﬁguration

for Propane (LP) Gas

Fire Pit Installation.

PROPANE

LP Connector

(connects to LP Tank)

LP Hose

Flush Mount Adjustable Regulator

(optional - you can use adjustable

regulator on the LP connector instead)

LP Air Mixer

(match BTU size to burner)

Air Intake Holes

• Use teflon tape or pipe joint

compound to seal all threads.

• An LP Air Mixer is required for

propane gas as installation.

Naturan Gas does not need an

air mixer.

• Be sure your fire pit has venting

holes to prevent it from filling

with propane gas. Propane gas

is heavier than air, leave a path

for it to drain from the burner

and enclosure area beneath the

burner to prevent gas buildup.

• Rough opening for burner tray

should be 1” larger than the

tray insert - allowing 1/2” space

on all sides for expansion due

to heat.

Remove Nipple Fitting

to Connect to Burner Pan

Drop-in Fire Pit Pan

PAGE 1
PROPANE Typical Configuration for Propane (LP) Gas Fire Pit Installation. Drop-in Fire Pit Pan Remove Nipple Fitting to Connect to Burner Pan LP Air Mixer (match BTU size to burner) Air Intake Holes • Use teflon tape or pipe joint compound to seal all threads. • An LP Air Mixer is required for propane gas as installation. Naturan Gas does not need an air mixer.
PAGE 2
NATURAL GAS Typical Configuration for Natural Gas Fire Pit Installation. Drop-in Drop-inFire FirePit PitPan Pan • Use teflon tape or pipe joint compound to seal all threads. Flush Mount Adjustable Regulator Gas Hose • Be sure your fire pit has venting holes to prevent it from filling with propane gas. Propane gas is heavier than air, leave a path for it to drain from the burner area and enclosure area to prevent gas buildup.