User Manual

Table Of Contents

Manual

Introduction

The Tessonics Receiver is designed to be integrated into the RSWA

System to receive from the Tessonics Remote Control.

The RSWA System is a portable Ultrasonic Quality Inspection Platform

used for the automotive industry. The operator will use the remote

control to operate the system to produce ultrasonic c-scan images of

defects and structures within spot welds and adhesive joints.

Receiver module

Model : R05-F-2-RECEIVER

Description : Tessonics Receiver

Applicant : Celadon Inc.

Manufacturer Factory : Hyun Seung I&C Co., Ltd

RF IC : Nordic semiconductor NRF52833

Communication with RSWA system through 12505WR-05 connector

Input rated : 5.0 Vd.c, 0.5 A

Size : 18.0 x 28.0 (mm), 1.6T

RSWA system

R05-F-2-Receiver PCBA is used only with RSWA system

RSWA System

HID K/D2.4GHz

PAGE 1
Manual Introduction The Tessonics Receiver is designed to be integrated into the RSWA System to receive from the Tessonics Remote Control. The RSWA System is a portable Ultrasonic Quality Inspection Platform used for the automotive industry. The operator will use the remote control to operate the system to produce ultrasonic c-scan images of defects and structures within spot welds and adhesive joints. Receiver module 2.
PAGE 2
FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution : Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
PAGE 3
Additional testing, Part 15 subpart B disclaimer The final host/module combination need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device.