PhilipsC2066.book Page 0 Wednesday, May 3, 2006 Discover Your Phone 262000 color main screen Back of the phone: camera lens 5:32 PM accept, except as required by applicable law, liability for any error, omission or discrepancy between this user guide and the product described. The device is meant to be connected to GSM/GPRS networks.
PhilipsC2066.book Up key and Down key Page 1 • Wednesday, May 3, 2006 5:32 PM Browse the menu/list on the same menu level. • Browse SMS contents or other long text messages. • Scroll to the previous or next picture when viewing pictures. • When there is an incoming call, long press to mute or deactivate vibration alert, but not rejecting the incoming call. In addition, in idle mode: • Short press Down key to open SMS editor, long press to activate/deactivate One key vibration mode.
PhilipsC2066.book Page 2 Wednesday, May 3, 2006 5:32 PM Tap on the fourth hard icon to open the Dial screen, whereby you can tap to enter numbers. • Soft key bar • There are 3 soft keys, namely, left, centre and right soft keys. The soft key bar will not appear in idle mode. The 3 permanent soft icons and time display icon In idle mode, there are 3 permanent soft icons at the bottom of the screen. You can quickly access the corresponding features via the 3 soft icons.
PhilipsC2066.book New message Organizer alert Page 3 Wednesday, May 3, 2006 5:32 PM When new SMS or MMS notification appears on the screen, tap List soft key to view details of the message, or press to return to idle mode. The notification screen will not appear again once you exit. Event with the lowest priority level. When there is an event of higher priority occuring at the same time, the phone will only emit an alert tone for the organizer event without displaying the notification.
PhilipsC2066.book Page 4 Wednesday, May 3, 2006 5:32 PM Table of contents 1. Getting Started ................................. 6 Installing and Removing battery .................... 6 Inserting and Removing SIM card ................. 6 Remove SIM card ............................................. 7 Charging the battery ....................................... 8 2. Main features ..................................... 9 Switch on the phone ....................................... 9 Enter PIN code ........
PhilipsC2066TOC.fm Page 5 Friday, May 19, 2006 8. Call list ...............................................34 Delete ............................................................... 34 Call meters ...................................................... 34 9. Messages ...........................................36 SMS .................................................................... 36 MMS (Multimedia messages) ....................... 40 10. Email ................................................44 11.
PhilipsC2066.book Page 6 Wednesday, May 3, 2006 1. Getting Started Read the safety instructions in the «Precautions» section before use. To use your phone, you must purchase a SIM card from your network operator. The SIM card contains your mobile number and subscription information. The SIM card can be used on any GSM phone, while your mobile phone number and subscription information remain unchanged.
PhilipsC2066.book Page 7 Wednesday, May 3, 2006 5:32 PM 3. With the metallic contacts of the SIM card facing downwards (towards the phone) and the clipped corner of the card facing outwards, slide the SIM card into the card slot horizontally in the direction as shown on the phone until it locks into place. 4. Install the battery. 5. Replace the back cover. Align the protruding ends of the cover with the indented slots on the phone and slide up the cover until it locks into place. Remove SIM card 1.
PhilipsC2066.book Page 8 Wednesday, May 3, 2006 Charging the battery Warning: Please only use batteries, chargers and accessories that are approved by Philips and compatible with your phone model. Use of other types of batteries, chargers and accessories may violate the warranty terms and conditions, and may cause danger. Do not place the battery in an extremely hot or cold environment. Keep the battery out of reach of young children. 1. Plug the charger into an AC power outlet. 2.
PhilipsC2066.book Page 9 Wednesday, May 3, 2006 5:32 PM 2. Main features Switch on the phone Long press to switch on the phone. Please ensure that the phone is switched off or that the phone is already switched on before you plug in the USB cable. Do not plug in the USB cable at the same time as you are switching on the phone. Otherwise, the power-on music feature will be interrupted. Enter PIN code You may set a security code (PIN code) on your phone to protect it from unauthorized use.
PhilipsC2066_MainFeatures.fm Page 10 Thursday, May 18, 2006 End a call Press or tap End 11:33 AM 2. Tap Dial soft key or press soft key to end a call. Make an international call 1. Tap "+" to insert it on the dial screen. 2. Tap on the numbers to enter country code. 3. Tap on the numbers to enter area code (usually without the "0" in front) and telephone number. 4. Press to dial directly; or enter Options menu and select Dial menu.
PhilipsC2066_MainFeatures.fm Page 11 Thursday, May 18, 2006 successfully established, you can answer, reject or end a call via the bluetooth headset. Before you can start using the bluetooth headset, you need to activate the bluetooth feature of your phone and switch on the bluetooth headset. With the bluetooth headset switched on, place the headset and your phone close together and open the bluetooth menu in your phone to search for bluetooth devices.
PhilipsC2066.book Page 12 Wednesday, May 3, 2006 3. Data connection 5:32 PM Hide If you tap Hide, this option will be selected. The other bluetooth devices within your bluetooth communication range will not be able to detect your phone. If this option is not selected, then other bluetooth devices will be able to detect your phone by default. Reject call in data transferring If you select this option, incoming calls will be rejected during data transfer.
PhilipsC2066.book Page 13 Wednesday, May 3, 2006 5:32 PM Note: You must activate bluetooth feature to carry out the above operations. Select Data Connection > Bluetooth > Phone settings > Activate from the main menu. When you have found a device of a certain device type (e.g. data exchange device), if this device also has other features (e.g. gateway device ), it will be listed in other device types as well (e.g. gateway device and all other devices).
PhilipsC2066_Connection.fm Page 14 Thursday, May 18, 2006 Disconnect If already connected, you can cancel connection by selecting Bluetooth device > Voice device, tap on the device name and then tap the selection box right after Connect option to de-select it. The connection will be cancelled upon confirmation. Trust Similarly, you can tap Trust and set the device as a trusted device. After a device has been set as a trusted device, it can be connected directly without a password.
PhilipsC2066.book Page 15 Wednesday, May 3, 2006 5:32 PM Infrared Your mobile phone features infrared technology (also called IrDA), which allows you to send to or receive data from other IrDA-compliant devices via a wireless connection (e.g., another mobile phone, PC or PDA, printer etc.). Data communication This menu allows you to connect your phone to your PC. If successfully connected, you can also use your phone as a modem. Note: Files that are copyright-protected cannot be sent.
PhilipsC2066.book Page 16 Wednesday, May 3, 2006 4 • Text or number entry Input method Your mobile phone provides a number of text editing modes, including Handwriting input, Pinyin input, English input, Numeric input, Symbol input and Phone number input (phone number input is available only under the Contacts menu). You can use soft key to switch among the first five input modes when in editing mode. The last input mode is only valid when adding or editing phone numbers.
PhilipsC2066.book Page 17 Wednesday, May 3, 2006 5:32 PM Onscreen Pinyin keyboard Onscreen Phone number keyboard Tap the letters on the screen to compose a pinyin combination, the corresponding list of candidate characters will be displayed on the screen. Left/right arrows will also be displayed when one line space is not enough to display all the candidate characters. Tap the left/right arrow to scroll pages.
PhilipsC2066.book Page 18 Wednesday, May 3, 2006 5:32 PM 5. Menu Menu operations Note: You need to insert a valid SIM card before you can use the different menu features that are described in the following chapters. If there is no valid SIM when you switch on the phone, the phone will go into restricted idle screen mode, and the use of the phone features will be limited. In idle mode, tap the Main menu hard icon at the top of the touch screen to enter the main menu.
PhilipsC2066.book Page 19 Wednesday, May 3, 2006 5:32 PM 6. Phonebook change the group name). You can differentiate the groups by assigning different ring tones for each group. Search Your phone supports smart phonebook feature. Not only can you store the frequently used phone numbers on the SIM card, you can also store other contact information such as address, email, etc on the smart phonebook. Note: When you switch on the phone, the phonebook will start to initialize.
PhilipsC2066.book Page 20 Wednesday, May 3, 2006 search for pinyin combinations 'ai', 'an', 'ang', 'ao', so on and so forth. If there are matching records in the phonebook, the screen will scroll to the first matching record. 3. If there are no matching records that start with pinyin combination 'a', the phone will search for English names that start with the letter 'a'. If there are matching records in the phonebook, the screen will scroll to the first matching record. 4.
PhilipsC2066.book Send SMS Page 21 Wednesday, May 3, 2006 5:32 PM Send an SMS to the default phone number of the selected record. Send MMS Send an MMS to the default phone number of the selected record. Send namecard Send out the selected record in text format via SMS, infrared or bluetooth. Copy to phone The selected SIM phonebook (if the record is record will be copied to a namecard on the SIM card) in the smart phonebook.
PhilipsC2066.book Page 22 Wednesday, May 3, 2006 Delete all 5:32 PM Allows you to delete all the records in your SIM card and smart phonebook at once. The records cannot be recovered once they are deleted. Therefore, you will be prompted to confirm before deletion. the namecard will be copied to the SIM card, whereby each number will occupy one record. The names on these records will be the same as that of the name field in the namecard.
PhilipsC2066.book Page 23 Wednesday, May 3, 2006 5:32 PM Capacity If you select this menu, you will see the following capacity information regarding your SIM card and your mobile phone: • Total capacity • Used capacity • Percent Display Own info Displays the preset own information. You can press / to browse the information. Group setting There are 6 groups by which you can rename them. Own info You can enter display, edit or delete Own information.
PhilipsC2066.book Page 24 Wednesday, May 3, 2006 7. Settings 5:32 PM SMS alert ringer You can set the SMS alert ringer here. Screen settings Ringer settings Incoming call ringer There are six caller groups in your phonebook. You can assign different ringtones to each of the caller group so that you will know who is calling you when your phone rings. You can tap the arrow on both sides of the group settings to select a group. There are two types of ringer for your selection in each group.
PhilipsC2066.book Page 25 Wednesday, May 3, 2006 5:32 PM Backlight You can select your favorite color theme. Note: Please do not use the Auto on/off feature to avoid the phone from switching on automatically when on a flight or in other places when use of the phone is prohibited. Our company shall not be responsible for any resulting damages. Touch panel adjust Auto screen lock You can set the backlight to turn off in 10 seconds, 30 seconds or 60 seconds.
PhilipsC2066.book Page 26 Wednesday, May 3, 2006 Call settings Call forward (network dependent) You can forward all your incoming calls to another phone number (or voice mailbox) when it is not convenient for you to answer a call. You can use this menu to set forwarding conditions. This feature is network dependent. Unconditional Unconditional call forwarding option will forward all your calls from the network to an assigned phone number.
PhilipsC2066.book GPRS call Page 27 Wednesday, May 3, 2006 5:32 PM When you are connected using GPRS, whether or not your phone will emit an alert tone to notify you that there is a second incoming call shall be determined by this menu. You can select On or Off. Set quick call Minute reminder You can select whether or not to use minute reminder. i.e. whether or not the phone will emit an alert on the 50th second of every minute when you are on the phone.
PhilipsC2066.
PhilipsC2066.book Page 29 Wednesday, May 3, 2006 5:32 PM You need to enter the PIN code to turn this feature on or off. Call barring Cancel barring This menu allows you to restrict outgoing and incoming calls of your phone. This feature requires the call barring password supplied by your network operator. The password will be transmitted to the network for verification.
PhilipsC2066.book Page 30 Wednesday, May 3, 2006 Guard settings Garbage SMS Settings This menu allows you to carry out the settings relating to garbage SMS. Against Once this feature is set to on, the garbage SMS will be discarded when you receive a SMS from a phone number which is in your Garbage PN list, and this SMS is treated as garbage SMS. By mobile phone only Once this feature is set to on, your phone will only receive SMS from mobile phone numbers.
PhilipsC2066.book Page 31 Wednesday, May 3, 2006 5:32 PM Information privacy You can protect important information on your mobile phone, which includes SMS, phonebook and call records. You can set a password for all the three items, or only for some items, or no password. Tap the selection box at the end of each item to select or cancel selection and then tap soft key to Complete and save your settings.
PhilipsC2066.book Page 32 Wednesday, May 3, 2006 Add existing networks The screen will display a list of existing networks. Select a certain network from the list and tap Add soft key. The selected network will be added to the bottom of the preferred network list. Add network code Open the editor, enter the country code and network code of the mobile network in order. Confirm again to add the code to the preferred network list. Attach GPRS Your phone supports GPRS.
PhilipsC2066.book Page 33 Wednesday, May 3, 2006 5:32 PM GSM settings You can set the following: • Data call type: ISDN (digital mode) or analogue [analogue mode] • Phone number: Enter the phone number for dialing. The phone will call this number automatically when it goes into online mode.[17266] • User name: User name for logging on to WAP server.[wap] • User password: Password required for log on.
PhilipsC2066.book Page 34 Wednesday, May 3, 2006 8. Call list 5:32 PM Send phone number Send the selected number as an SMS to other recipients. Delete There are 3 types of call list: • Missed call (if the call is rejected, it will also be considered as a missed call) • Answered call • Outgoing call (outgoing calls made from your phone regardless of whether or not the call is successful) Each call list can store 20 phone numbers. The most recent call record will appear at the top of the list.
PhilipsC2066.book Page 35 Wednesday, May 3, 2006 5:32 PM Call timer Outgoing call You can check the total duration of your outgoing calls. Incoming call You can check the total duration of your incoming calls. Reset timer Reset the call timer and restart call timing.
PhilipsC2066.book Page 36 Wednesday, May 3, 2006 9. Messages You can enter Messages menu from the main menu, or tap the second hard icon in stand-by screen to enter the menu. The available sub-menus include: SMS, MMS. SMS SMS is a convenient and affordable mode of communication which enables you to send text messages to the other party. You can use the SMS menu to send messages to another handphone or a device that is capable of receiving SMS.
PhilipsC2066.book Page 37 Wednesday, May 3, 2006 5:32 PM can select your preferred location to store your SMS. Once your preferred location is fully occupied (SIM card will reserve 1 empty slot), your SMS will be stored in the non-preferred location. There is an Unread icon on the right of a new message in the Inbox. When you enter the details screen of this SMS, the message status will change to Read and the icon will also be changed accordingly.
PhilipsC2066.book Page 38 Wednesday, May 3, 2006 Settings Service center number This menu allows you to save your SMS center number of your network. This number can be modified. If the SMS center number is empty, you will not be able to send any SMS. Status report 5:32 PM when your recipient is not connected to the network (not able to receive your messages immediately). You can press / to select a duration.
PhilipsC2066.book Page 39 Wednesday, May 3, 2006 5:32 PM Call voice mail When you receive a voice mail, the phone will send you an alert. You can then call your voice mailbox number to retrieve your voice mail. If the number is empty, you will be prompted to enter the number. Voice mail number Generally, you can obtain two sets of numbers from your network provider: • for the caller to leave a voice message (this number can also be set via Call Forwarding/...
PhilipsC2066.book Page 40 Wednesday, May 3, 2006 MMS (Multimedia messages) 5:32 PM Next page This option is available only when there are 2 or more pages in your MMS and the current page is not the last page. This menu allows you to view the next page. Send Send your edited MMS. If your MMS is empty, this option will not appear. Save Save your MMS in the Draft box. If your MMS is empty, this option will not appear.
PhilipsC2066_Messages.fm Add audio/ Delete audio Page 41 Thursday, May 18, 2006 Enter Sounds or MP3 folder to select an audio file. When an audio file is added, an icon will be displayed on the MMS editing screen. If an audio file has been added, this option will change to Delete audio, you can select Delete audio menu to delete the audio file on the current page. Add slide Add a new page after the current page. If the current page is blank, this option will not appear.
PhilipsC2066.book Reply all Forward Delete Page 42 Wednesday, May 3, 2006 If the Cc field of the MMS you have received is not empty, it implies that the message sender has also sent the message to other recipients in the Cc list. When you select this option, the reply will be sent to all recipients, including those in the Cc list. If the selected MMS has not been read, this option will not appear. Forward the selected MMS.
PhilipsC2066.book Network settings Page 43 Wednesday, May 3, 2006 5:32 PM Select this menu to enter the next screen, which contains 3 sub-menus; Network account, Gateway address and Gateway port. You can select an account from network account list, edit the Gateway address and Gateway port. Validity period Allows you to select the duration by which your MMS will be stored in the MMS center. Read report You can set this option On or Off.
PhilipsC2066.book Page 44 Wednesday, May 3, 2006 5:32 PM 10. Email Your phone supports JAVA Email and you can send emails to your friends using the phone. This menu allows you to compose and send emails. The email feature will be activated automatically when you enter the menu. When successfully activated, you can select an account. You can configure the account via Accounts Define or choose from the list of accounts and set it as the default email account.
PhilipsC2066.book Page 45 Wednesday, May 3, 2006 5:32 PM 11. My Files My Files menu organizes the photos, videos, mp3, pictures and audio files in your phone. You can carry out a variety of operations depending on the file type, such as Preview, Play, Delete, Rename, Detail etc, you can also select the different files, move or copy the files between the phone and the MINI SD card.
PhilipsC2066.book Page 46 Wednesday, May 3, 2006 12. Fun Camera and Video recorder Your phone has an integrated digital camera, which allows you to take photos of different resolution, quality and effect, as well as add a frame to the photo. When in Camera and video recorder mode, you can use the quick option bar to switch between the Camera and Video recorder. Preview Select Camera and Video recorder from Fun menu to enter preview mode.
PhilipsC2066.book Page 47 Wednesday, May 3, 2006 5:32 PM default file name. Return to preview mode and you can continue to record video. Exposure Select the camera exposure so as to obtain a suitable and correct exposure of your subject. Mode Available only in camera mode. Allows you to select the camera mode, e.g. Single, Continuous, etc. DC/DV switch Switch to video recorder mode when in camera mode, and switch to camera mode when in video recorder mode.
PhilipsC2066.book Page 48 Wednesday, May 3, 2006 5:32 PM Torch You can select to switch the torch on or off when you take photo/ record video. This setting will not be saved. Recorded music Available only in video camera mode. You can select whether or not to record sound when recording video. Shutter sound Available only in camera mode. You can select a personalized shutter sound via this option. Torch You can select whether or not to turn on the torch when taking photo or recording video.
PhilipsC2066.book / key soft key soft key Page 49 Wednesday, May 3, 2006 5:32 PM Short press to select the previous/ next file. During playback, long press to fast forward, long press to lock/unlock the screen. Select song Create a playlist. You can select to listen to the songs in the playlist, or select to play all the songs. Open options menu. See the next section for the available options. Delete Allows you to delete the selected MP3 file. Tap this soft key to switch to audio player.
PhilipsC2066.book Page 50 Wednesday, May 3, 2006 5:32 PM Audio player Your phone features an audio player. You can play MP3 songs via the MP3 player and you can also play other supported audio files via the audio player. The operation of the audio player is similar to the MP3 player. Please refer to MP3 player. However, the Options available are slightly different. Majority of the options in Options are the same, the difference are: • Select type: Allows you to select the type of audio file to playback.
PhilipsC2066.book Send Page 51 Wednesday, May 3, 2006 5:32 PM You can send the selected file to the other devices via MMS, infrared or bluetooth. The file might not be sent if it is too big. Manage file You can copy or move the video files from your phone to a MINI SD card. Likewise, you can copy or move them from your MINI SD card to your phone. When playing a video file, you can carry out the following operations via the playback menu: / key Long press to fast forward/ rewind.
PhilipsC2066.book Page 52 Wednesday, May 3, 2006 List view All the pictures will be displayed on the screen as a list. Preview Enter the next screen to preview the selected picture. You can press to preview the previous/next picture. You can zoom via the options menu. Delete Delete the selected picture. Rename Rename the selected picture. Details Check details of the selected picture, such as file name, file size, etc.
PhilipsC2066.book Page 53 Wednesday, May 3, 2006 5:32 PM The operations in Options menu are similar to those described in the previous chapter, except: Zoom This menu allow you to select Enlarge, Shrink, Best fit or Actual size for the picture. When you enlarge or restore a picture to its actual size, and the size of the picture becomes larger than the screen size, you can tap the arrows on the screen to view other parts of the picture. Tap to restore, tap again to exit.
PhilipsC2066.book Page 54 Wednesday, May 3, 2006 13 • Tools Alarm clock Your phone features a 24-hour alarm clock. There are 3 groups of alarm clock and you can Activate or Deactivate them. 1. Select an alarm and tap the check box in front of the alarm to activate or deactivate it. Enter the alarm time in the editing box and select a repeat mode by tapping the arrow at the sides to select.
PhilipsC2066.book Page 55 Wednesday, May 3, 2006 5:32 PM Alert type You can set different alert types. The available alert options include: On time, 5 min. before, 10 min. before, 1 hour before, 1 day before, 1 week before, No reminder. If No reminder is selected, the phone will not emit any alert when the event is due to occur. However, the event will remain in the events list for review. Repeat method You can set the repeat method of your events.
PhilipsC2066.book Page 56 Wednesday, May 3, 2006 You can enter a maximum of 10 digits in the editing window. Dictionary This feature allows you to look up Chinese and English word, select different word library to Remember words, and create New words, etc. Lookup This menu allows you to input Chinese or English word in the editor. After confirmation, similar words that were found will be displayed on the screen. Tap on the word to view details.
PhilipsC2066.book Page 57 Wednesday, May 3, 2006 5:32 PM Stopwatch New Open a blank file to edit a new text file. Open Open the selected file for viewing. Delete Delete the selected file. Rename Rename the selected file. Detail The start time displayed on the screen is 00:00.0, tap Start to start the timer, tap to clear. When the stopwatch is in operation, tap Record to record the current time, while the timing continues. You can record up to 6 groups of timing.
PhilipsC2066.book Page 58 Wednesday, May 3, 2006 5:32 PM If there is a Daylight saving time icon on the city, it indicates that city is in daylight saving status. You can set the foreign city via the options menu: Daylight saving time on or off, or set the foreign city as local city.
PhilipsC2066.book Page 59 Wednesday, May 3, 2006 5:32 PM 14 • WAP Resume You can enter the last web page you have browsed. Enter address Your phone features a WAP browser. You can browse the WAP contents on the internet via the WAP browser. Before you can start using the WAP browser, you need to configure the WAP settings. Enter the URL of the web site you wish to browse and start browsing the web pages.
PhilipsC2066.book Page 60 Wednesday, May 3, 2006 5:32 PM Browser options Show images If the web page you are browsing contains images, you can select to show or hide the images using this menu. Enable refresh You can select to enable or disable refresh. Rename profile Allows you to rename the selected profile. The profile name cannot be longer than 40 letters. Cache Cache mode Select to enable or disable cache. Clear cache Allows you to clear cache.
PhilipsC2066.book Page 61 Wednesday, May 3, 2006 5:32 PM 15 • STK The structure and name of the menu available is dependent on your SIM card which is configured by your network provider. The services will vary according to the different STK provider (some SIM cards do not have STK feature) and you cannot modify them. STK (SIM Tool Kit) enables the smart SIM card to run its own applications.
PhilipsC2066.book Page 62 Wednesday, May 3, 2006 Icons & Symbols Screen Display This is a candy bar phone with a single LCD screen. It features a 176 (width) x 220 (height) dpi, 262K color TFT display screen. Each character on the display screen is a complete graphic rendering block and the size is font dependent. The following icons and symbols appear only in idle mode to indicate the current status of the phone, such as battery level, network signal, etc. Battery - Indicates battery level.
PhilipsC2066.book Page 63 Wednesday, May 3, 2006 5:32 PM Vibration - Indicates that the phone will vibrate when there is an incoming call, Call forwarding - Indicates that the call forwarding function is activated. Silent - Indicates that silent mode is activated. Black list - Indicates that the Blacklist feature has been activated. White list - Indicates that the White list feature has been activated.
PhilipsC2066.book Page 64 Wednesday, May 3, 2006 Precautions Radio wave Your cellular mobile phone is a low power radio transmitter and receiver. When it is operating, it sends and receives radio waves. The radio waves carry your voice or data signal to a base station that is connected to the telephone network. The network controls the power at which the phone transmits. • Your phone transmits/receives radio waves in the GSM frequency (900 /1800 / 1900 MHz).
PhilipsC2066.book Page 65 Wednesday, May 3, 2006 5:32 PM from exposure to radio wave energy. Your cellular telephone complies with all applicable safety standards and the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC. Always switch off your phone Inadequately protected or sensitive electronic equipment may be affected by radio energy. This interference can lead to accidents.
PhilipsC2066.book Page 66 Wednesday, May 3, 2006 Performance improvement In order to improve the performance of your phone, reduce radio energy emission, reduce battery consumption and ensure safe operation adhere to the following guidelines: For the optimal and satisfactory operation of the phone you are recommended to use the phone in the normal operating position (when not using in hands-free mode or with a hands-free accessory). • Do not expose your phone to extreme temperatures.
PhilipsC2066.book Page 67 Wednesday, May 3, 2006 5:32 PM Do not use your phone while driving It lowers concentration, which can be dangerous. Adhere to the following guidelines: • • • • • Give your full attention to driving. Pull off the road and park before using the phone. Respect the local regulations in countries where you drive and use your GSM phone.
PhilipsC2066.book Page 68 Wednesday, May 3, 2006 Troubleshooting PC tool cannot be successfully connected If PC tool fails to connect successfully, please check if the Mass storage only feature in Phone Settings menu has been activated. If it has been activated, please deactivate the function and switch off the phone. Thereafter, switch on the phone again to re-connect. The phone does not switch on Remove/reinstall the battery. Then charge the phone until the battery icon stops scrolling.
PhilipsC2066_TroubleShooting.fm Page 69 Thursday, May 18, 2006 You can’t send text messages Some networks do not allow message exchanges with other networks. First check that you have entered your SMS centre number, or contact with your operator for detailed information on this subject. You can’t receive and/or store JPEG pictures A picture may not be accepted by your mobile phone if it is too large, if its name is too long, or if it doesn’t have the correct file format.
PhilipsC2066.book Page 70 Wednesday, May 3, 2006 Your phone is not charging If your battery is completely flat, it might take several minutes of pre-charge (up to 5 minutes in some cases) before the charging icon is displayed on the screen.
PhilipsC2066.book Page 71 Wednesday, May 3, 2006 5:32 PM Philips Authentic Accessories download MIDI ringtones and wallpapers, or transfer photos from your phone to the PC. In addition, you can use your phone as a modem. Philips Authentic Accessories maximize the performance of your Philips phone. The following accessories are for use with your mobile phone, which may be included as part of your phone package. Some accessories may not be available in certain countries.
PhilipsC2066.book Page 72 Wednesday, May 3, 2006 5. Do not drop, knock or shake your phone. Careless use of the phone will damage the internal circuit boards and the intricate structures. 6. Store the phone and its accessories out of reach of young children. 7. Do not clean your phone with chemical products or cleansing liquid. Please clean your phone with a clean, dry cloth. 8. Please keep your phone dry. Raindrops, moisture and other liquid containing minerals may cause the electronic circuits to rot.
PhilipsC2066.book Page 73 Wednesday, May 3, 2006 5:32 PM NOTICE: SD/MMC Card Instruction for Use Philips applies the most advanced technology and quality standards in the design and manufacture of the products to ensure optimum customer experience. Therefore, Philips has thoroughly tested your new Philips mobile phone to ensure its compatibility with the numerous Mini SD cards available in the market, and that it meets the applicable specifications and standards.
PhilipsC2066.book Page 74 Wednesday, May 3, 2006 Trademark declaration JAVA is a trademark Microsystems, Inc. Tegic Euro. Pat. App. 0842463 74 T9 ® is a trademark Communications Inc.
PhilipsC2066_SAR.fm Page 75 Friday, May 19, 2006 11:45 AM SAR Information - International (ICNIRP) ENGLISH IFU FOR FCC Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy defined by the international standards.
PhilipsC2066_SAR.fm Page 76 Friday, May 19, 2006 11:45 AM For body worn operation, this phone has been tested and meets the Federal Communications Commission RF exposure guidelines when used with the Philips accessories supplied. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The SAR limit set by the Federal Communications Commission of the U.S. Government is 1.6 W/kg. The highest reported SAR values are: Head: 0.840 W/kg; Body-worn: 0.258 W/kg.
PhilipsC2066_SAR.fm Page 75 Monday, May 29, 2006 12:22 PM SAR Information - Federal Communications Commission (FCC) ENGLISH IFU FOR FCC The CTS900 complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful and interference, (2) this device must accept any interference received, including interference that may cause undesired operation.
PhilipsC2066_LimitedWarranty.fm Page 77 Friday, May 19, 2006 Limited warranty 1. Workmanship During The Limited Warranty Period? What Does This Limited Warranty Cover? During the limited warranty period, Philips or its authorized service representative will, at its option either repair or replace, without charge for parts or labor, a materially defective Product with new or refurbished parts or Product and return such repaired or replaced Product to the Consumer in working condition.
PhilipsC2066_LimitedWarranty.
PhilipsC2066_LimitedWarranty.fm Page 79 Friday, May 19, 2006 ANY WARRANTY OF SATISFACTORY QUALITY MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PHILIPS’ TOTAL LIABILITY FOR DAMAGES RELATING TO OR ARISING OUT OF THE PURCHASE OR USE OF THE PRODUCT, REGARDLESS OF THE TYPE OR CAUSE OF SUCH DAMAGE OR THE FORM OR CHARACTERISATION OF THE CLAIM ASSERTED (E.G. CONTRACT OR TOPIT), SHALL NOT EXCEED THE ORIGINAL PURCHASE PRICE PAID FOR THE PRODUCT.