User Requirement Document for C8000 Serial Number: 84-20-0076-20-01 Version: 1.
Revision Record (Part II) Version No. 01 Author Nancy Date 2005/03/24 Description First version 5.8.2 Calendar & Schedule Add "Exit" menu as the last option of weekly view & monthly view 01 Nancy 2005/03/29 Annex A: C8000 Menu Tree [4] Mobile office Calendar Add "Exit" menu as the last option of weekly view & monthly view 3.2.1 Alpha/numeric keypad 01 Nancy 2005/03/30 Add follow sentence before the grid. “ Under T9Eng input method, press 1 key can input space” 5.6.
NOTICE For body worn operation this phone has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
REVISION RECORD (PART II) ..........................................................................................................2 1.PURPOSE AND OBJECTIVES OF THE DOCUMENT.................................................................6 1.1 Purpose...........................................................................................................................................6 1.2 Major objectives...................................................................................................
.2.11 End a call.............................................................................................................................22 5.2.12 Mute/Unmute ......................................................................................................................22 5.2.13 Adjust receiver/headset volume...........................................................................................22 5.2.14 Record during the call ..................................................................
5.8.2 Calendar & Schedule.............................................................................................................71 5.8.3 Notepad .................................................................................................................................74 5.8.4 World time.............................................................................................................................74 5.8.5 Calculator ....................................................................
Record ................................................................................................................................................96 Image editor .......................................................................................................................................96 Image browser ....................................................................................................................................96 Audio player..............................................
• Senior business personnel • High-end market 2 REFERENCE DOCUMENTS <> 3. INTERFACE DESCRIPTION 3.2 Keypad The keypad to this Handset has 28 keys in all, which are divided into tow functional blocks as described below: • Alphanumeric keypad, 12 keys in total • Control keypad, 16 keys in total. 3.2.1 Alpha/numeric keypad Alpha/numerical keypad is composed of 12 keys arranged according to a certain standard.
key and [#] key. Keys in the Alpha/numeric keypad allow user to input numbers or characters. As shown in table 1, press the same key may result in different values depending on different screen environment. Under T9Eng input method, press 1 key can input space.
• Five keys on the side of the Handset (Mode key, Menu key, Shooting key, Focus (in) key, Focus (out) key. Detailed description of control key: [On/Off]) key: • If the handset is power off, press this key to power on (need to long press when the handset is charging). • If the handset is power on, long press this key to power off no matter what state the handset is now. • If the user is browsing menu or editing text or enter other applications etc, short press this key to close the current application.
[Home] key: Press this key will back to idle screen no matter in any circumstance, but the current running applications don’t close and just switch to background. There are two side keys on the left side of the phone, they are “Mode” key and “Menu” key; there are three side keys on the right side of the phone, from the top to down they are “Multimedia” key (also named “Shooting” key), “Focus (in)” key (also named right side “up” key) and “Focus (out)” key (also named right side “down” key).
• • • • • • • Press [UP] key to enter call list (Mixed). Press [Down] key to enter phonebook name list. Press [Left] key to enter audio player. Press [Right] key to enter SMS. Press [OK] key to enter main menu. Press [SKL] key to enter main menu. Press [SKR] key to enter running program list. The running program list doesn’t include Touch panel adjust/Flight mode/Factory setting/sync/Call. • • Press number key input phone number, and then dial or enter “Option” menu. Use hot key.
Battery (thick battery) Indicates the electricity quantity of the battery with five levels in total. This icon scrolls during the process of charging. When the thick battery is used, different icons are displayed. When lock is activated: Lock/Unlock If phone function is activated, the user is asked to input password when he wants to power on. Display the first icon. If phone function is deactivated, then display the second icon. Note: The user can select Lock or Unlock.
Silence Indicates silence function has already been activated. WAP Alert Indicates WAP alert info comes. Table 2 Icons Description For the display position of the icons, please refer to OSG. The Vibration icon is only effect for incoming call, and don’t effect for sms/mms/alarm clock/etc. If the user press “#” key to on/off vibration is still only effect for incoming call. For lock/unlock/SD Card/message/miss call icons, the user can use touch pen to click this icon to active related function.
4 BASIC DESIGN 4.1 Basic principle If Scratch pad editor is used during the call, then contents of Scratch-pad editor will be displayed at first after end the call. Contents of a feedback screen will stay in the screen until a preset time(20 seconds) set by the timer or until another event occurs. Timing can begin again depending on keystrokes. When sending a message or making a call, if a number or a name has been selected from the Phonebook, then press [Pick Up] will begin to launch the call.
4.2.6 Alarm clock When the Handset is off, alarm clock can awake the Handset, display alarm animation and give out alarm clock ringer. When alarm clock ringer time expires or any key is pressed during the alarm ringer, the alarm clock will stop and the Handset will automatically turn off. In idle state, alarm clock is displayed and alarm clock ringer is given out.
5 SERVICE INTRODUCTION 5.1 Power on/off 5.1.1 Power on To switch on the Handset, press [On/Off] key. Before initialization, the Handset displays power on screen and gives out the power on tone. If the phone is protected from password(On), will ask the user to input. Only correct input can go through. In case of no SIM card or other errors, the Handset will enter “Usage Restricted” state.
recording icon display on the screen. No matter handfree or unhandfree, the user can record the current call. The max recording time is 99 minutes. If the call is end, the recorder auto stop, and the recording file saved automatically, the saved file name is “Call_DateTime”, for example “Call_200501101520”. If the incoming cal is a“data call”,then the screen will prompt“data call”,and there’s only a“Reject”softkey,the user can’t accept this type call.
dialing preparation option list to select “dialing”, “IP dialing”, and then the Handset enters dialing state. Another way, input numbers under idle state, if the name is display in the matching list, press up/down key to select and press [PickUp] key to dial. In case of IP dialing, the system will add an IP special service number before the number input by the user, and then send the number to the network.
5.2.4.3 IP call The user can choose to make IP dialing. After the user selects the “IP call” option, the Handset will automatically add the preset IP special service number before the telephone number (if the former several digits are the IP special number, the Handset can recognize it, avoiding to add repeated numbers), and make IP dialing. The premise of IP dialing is to input an IP special service number into the IP special service number screen in Phonebook menu.
5.2.5 Auto redial For some network calling management failures, the Handset provides auto-redial function (it is necessary for the user to activate the Auto redial function in Phone settings.) Before redialing, it will ask user whether redial. Press “OK” or left softkey, then the Handset will begin automatic redialing. If the user press right softkey/[C] key/ [Home]key/ [On/Off] key, then don’t auto redial and return to idle state.
• Mute/Unmute • Reord/Stop record • End all calls The user alse can adjust volumn by left side up/down key To end the current call, also can press [On/Off]. During the call, the user can record the conversation. The coding format is only AMR. 5.2.8 Call waiting (second incoming call) If a new incoming call arrives when the Handset is in call, the Handset will display call waiting screen and give out four short waiting prompt sounds.
5.2.10 Multi-party call (telephone conference) When the Handset is in call, and there is a call in waiting, the user can answer the waiting call and hold the current active call, then select “Join”, thus combining the two incoming calls with the Handset into a telephone conference. The Handset is the manager of the conference.
5.2.15 Hand free mode during the call The user can press a dedicated key to enter hand free mode during the call (single call, or multiparty call). And can also stop it. 5.3 Public Land Mobile Network (PLMN) management 5.3.1 Public Land Mobile Network In idle state, the Handset displays the network name. If the Handset can’t identify the network name, then it displays country code and network code. 5.3.
When there’s an incoming call, the matching principle between incoming call number and phone book is as follows: China Mainland version ¾ ¾ ¾ ¾ ¾ both <= 11 digits, only the two numbers are the same length and same number, we think they are the same number one < 11 digits and one > 11 digits, they are different both >11 digits or one >11 one =11, compare the last 11,at the same time, it support floating 5 digits(like birder match algorithm description) if the number which saved in phonebook include ext.
z SIM Card PB Each record in the SIM Card includes s a name and a number. The saved record must have a name and a number. z Handset PB (Smart PB) Each record in the Smart Phonebook is called a “name card” which may include the following information: Name (up to 40 bytes for handset phonebook name, up to 14 bytes for SIM card phonebook name) Number (each name card can have up to 5 numbers, and the type of each number is fixed, in other word, each type just only has one number.
For each record in SIM card or handset, the name field can input any character、number、 Chinese/English word. The number field only can input numbers and “*” “#” “+” “w” “p”, can’t input Chinese word or other English characters. “w” only can input one time,and the “p” must display behind “w”. “p” can be input many time. The post code field only can input numbers. The other fields can input any character、number、Chinese/English word.
C8000 supports following Search methods: • By surname Classify the initials of all PB records (initial letter for English name and initial Pinyin for Chinese name, “L” for “Li”(李) for example). The records with same initials are put in one group. If a letter is none of the initial in Phonebook, it will not be listed. All letters are listed in alphabetical order. All surnames with the same initial will be listed to the right of the letter (there will be another line if one line is not enough).
• Copy to SIM card ((if the record is in the phone) The selected name card in the Handset PB can have up to 5 phone numbers. This operation will only copy all the phone numbers to the SIM Card with each phone number occupying one record in SIM Card. Name in the record all comes from the name field of the name card. • Move to phone (if the record is in the SIM Card) • Move to SIM card (if the record is in the phone) It is similar to “Copy”. Only that the source record will be deleted after copy.
• SIM card Delete all records that saved on the SIM card. Before delete, it should prompt user. • Phone Delete all records that saved on the phone. Before delete, it should prompt user. Copy All • SIM to Phone The records can be copied to the phone one by one to the last until the phone is full. The name and number of a SIM Card record are copied to the Handset PB with the SIM Card number defined as the default phone number (default field).
a Handset PB recor, but the own info don’t include group). • Delete Own Info The user can clear own info, that is, to empty all the fields of own info. • Send Own Info The user can send own info by SMS in text formatting (Note: If the own info is too long, part of it may fail to be sent out). Select “Send own info”, then transfer SMS editor. The own info will display on the SMS editor, the user can send it as SMS.
Call list does not include auto redial numbers. View and deal with records in Call list The user enters the Call list. The user can press “Option” softkey to delete records in the call list. In “Option’ softkey, there are five menu items: “Delete selected”, “Delete dailed”, “Delete answered”, “Delete missed”, “Delete all”. The user can select any record in the list , press green key to call the record, and press “OK” key to view detailed information (the time list of the number).
can set forward icon on idle, and only inquire unconditional forward status when power on. Totally, there are four types of call forward: • Unconditional After unconditional divert is activated, all incoming calls will be diverted to a predesignated number. The Handset will give out no prompt information. • When busy After Divert when busy is activated, an incoming call will be diverted to a preset number if the user is busy or rejects the call.
bar. Minute reminder The user can select to set minute prompt sound during a call, then the Handset will give out prompts at the 50th second of each minute after a call begins. Any key answer Any key can answer the incoming call except [On/Off]/ [SKR]/ [C]/ [Home] / [Up] / [Down] / [Left] / [Right] /[OK]key when this function is activated. Auto redial The user can choose to activate or deactivate the auto redial function.
Fax call active/deactive • GPRS call: If another voice incoming call arrives when processing a GPRS session, whether or not to prompt the user is determined by this option. The user can select this menu and then press the right key to activate or deactivate this option. Send ID (need network support) The user can choose whether to send ID(phone number) to the one who is called by this option. There are four sub menus in this menu:on, off, default and status.
the new password”) to change PIN/Call barring code. 5.4.6 Guard settings 5.4.6.2 Power on protection If the user active “power on protection”, then the user will be required password when the phone power on. To set a password for power on, select it and press “OK” key to open sub menu, the user can select “on” to active this function. Before active, the user will be required to inpute the password, if the password is wrong, then can’t active safeguard and back to previous screen.
list on the screen. The user can select anyone and add it to the end of the preferred network list by pressing the “Add” key. • Add existing networks It will be displayed in the existing networks list saved in the Handset after confirmation. The user can select anyone and add it to the end of the preferred network list by pressing the “Add” key. • Add network code The Handset will open the editor after confirmation. The user can input mobile country code and mobile network code in turn.
• Call Ringer type settings • The other of the sound settings are in accord with the items of the “Personalized settings ” of the current selected profile in the “Quick settings ”(no repetition here). Please refer to 5.5.4 Quick settings Ring type The PB in this Handset is composed of six groups. Each group has a different ringer for the user to know which group’s call it is. All ringers are in one list, but the user can view ringer of one type by selecting from the combo box.
If the focus on the top layer picture, press “Up” key, the focus back to combo box. If the focus on combo box, press “Down” key, then the focus move to the first picture. When the focus on a picture, the user can press direction key to select any picture, and then the left softky “Option” includs: “Preview”、 “Icon view”、 “List view” 、 “set as wallpaper”. Select a picture and then press “OK” key can set as wallpaper too.
program will switch to Traditional Chinese. The user can set the language of menu and prompt. The interface shall support multiple languages, like: • Simplified Chinese/Trandional Chinese • English Under English language, can’t display lunar calendar. Input method C8000 can support input methods, such as T9 Simple Chin. Pinyin, T9 Traditional Chin. Zhuyin, T9 Simple Chin.strokes, T9 Traditional Chin. strokes, T9 Eng, abc, 123. For each input method, the user can select On/Off.
LCD sleep interval On occurrence of the following, the LCD backlight and keyboard light will be lighted: • Press a key • During a period after the keyboard is released • During a period after an accessory is connected to the Handset • During a period after a new event occurs • During a period after a call arrives • During a period when the screen displays call information after a call ends.
Message Alert Calendar alert Power on/off tone Battery alert On Off Off On On On On On On On Enter “Quick settings” menu, there are five profiles display on the screen, the user can use “Up”/”Down” key to select a profile, press left softkey “Option”, the user will see: z Enable: Select this menu to active the selected profile and back. The user also can press “OK” key to active and back. Don’t save if the touch pen clicks it.
After Key tone is activated, key tone will be heard when a key is pressed. Depending on the current situation, the prompt sound may be common or double tone multi-frequency (DTMF) sound. For the latter, if the user presses an illegal key, the Handset will give out a invalid sound, not DTMF sound. Touch panel tone The user can activate or deactivate tone when clicking the touch panel. Power on/off tone The user can activate or deactivate power off tone.
There are two means to set a hotkey: one is long press an undefined numeric key in idle state, the other is to set the hotkey function for a numeric key in the menu. After entering “Hotkey settings” menu, the user can browse the Hotkey list. Items in the list is displayed in a way as follows: in the left is a key code, and in the right is the corresponding hotkey function; if the key is not used, then “No hotkey” is displayed.
Format: Select this menu to format the SD card, before this opertiong, should prompt the user (only when the focus on the page header of SD). The follows options only when the focus on the file list: Open:Enter selected directory. It is invalid for a selected file. Cut:Cut the selected file into the buffer Copy:Copy the selected file into the buffer Paste:Paste the selected file into the current directory from the buffer Delete:Delete selected file Upwards:Back to previous directory.
Quick setting 5 name Use in car For other factory settings for quick settings, please refer to quick settings section.
Hot key settings Refer to 5.5.
Hide sender off Delivery time Immediate DV/DC Meter mode (Only in DC) Single White balance Auto Image size 320*240 quality Fine Photo effect Off Exp.compen 0 Storage location Phone Display info On 5.6 Multimedia 5.6.1 DV/DC If the phone’s cover overturns to 90 degree and time more than 1.5 s, then enter DC/DV. Leave factory, system enter DC default, but next time enter DC/DV according to the user enter what function last time.
insufficient”. Picture and video will be automatically saved to the selected storage equipment by the default name(like img001.jpg, where 001 is increased automatically.) when shooting is over. The taken picture is kept on the screen for 2 seconds and then the system returns to the preview status. After shooting, the screen back to preview, press left side “Mode” key can switch to DC player/DV Player to view the photos or videos.
Fine(default) Super fine The image size can be: For DC 1280*1024 640*480 320*240(default) 160*120 For DV 320*240(default) 176*144 If the user want to shoot MMS picture, the image size will be restricted as follows. (Only allowed sizes are shown to the user.) MMS Image size only can be: 160*120 • MMS mode(For DV): Limit the size of video in 50k.
info (Please refer to UIS). If the selection is “Off”, the above mentioned info will not be displayed. In DC/DV preview screen,there’s a “Exit” icon,the user can use touch pen to click this icon to exit fromDC/DV. 5.6.2 Record The system enters record screen. The content is : • Title: Recorder • Button “START” to record and then the key becomes “STOP”. • Recorded time • Max record time • Left and Right softkey prompt. The record format is AMR only.
Eraser: Fill: Fill in the area with the foreground color. The area is an adjacent area with the same color with the selected point. Rectangle: Draw rectangle with selected foreground color. Circle: Draw circle with selected foreground color. Line: Draw lines with selected foreground color. The user can select size (four thickness types, from 1 dot line to 4 dot line.). Rotate& Flip: Rotate: Turns the image around its center point. The system displays floating bar when the user selects Rotate.
“OK”key to enter file management to select storage path. 5.6.5 Image browser The following types of image can be supported: picture(Jpg), icon(bmp), animation (GIF), PNG Enter “Image browser” menu, the focus first on the combo box, press “OK” key can open combo box, and press “Up”/”down” key to select location, press “OK” to save. Press “down” key, the focus move down to the image list. If the focus on the top layer image, press “Up” key, then the focus move to combo box.
• The function of the left and right softkey: “Option” and “Back” Pressing Up/Left direction key can view the previous picture, while pressing Down/Right direction key can view the next picture. The option menu is as follows: (Most of them have the same functionality as above option for a single picture.) Zoom: will have four sub-menu items. Zoom in: can zoom in the picture. It can be pressed 3 times, then becomes gray (not available). Zoom out: can zoom out the picture.
In the audio play screen, The following button is used: Play/Pause Stop Fast forward(Midi file can’t be support this) Fast Revind(Midi file can’t be support this) previous Next Volume up/down :On left area of the screen. Use touch pen click it can adjust volume. Play list:On the right area of the screen. If the user selects many files at one time, then this area can show the user which file is playing now. the user also can use touch pen click it to play other audio in play list.
picture, if the video file can’t be support, then display a fixed picture. The user only can select one file at one time. When the user select a file, the left softkey “option” menu as follows: • • • • • Play:Enter video player screen to play the selected file, the use also can press “OK” key to play. If the user select file can’t be support, then popup a dialog to prompt “Can’t support this file”. Delete:The unlocked video can be deleted.
right softkey: stop/back “C” key: Back If the user want to switch back to the mobile LCD, he must first stop the video, and then the control power automatically revert to mobile, the user can play video on LCD by pen-touch or key-press event. When the video was playing on TV, if the link between mobile and TV was interrupted, the TV will display blue screen, but the video will not stopped till the user press stop it himself or the video is end.
there is a shortcut tool button is “Go”. Content area:Display content of web page, including image and text. Left softkey: “Option”, please refer to 5.7.2.1 Options. Right softkey: “Back”, if the user press right softkey, then there should be a dialog for the user to confirm the exit action, after the confirmation of the exit action, browser terminates and control will return to the previous page where user starts the browser. The user can press up/down and left/right key to scroll the web pages.
5.7.2.1.2 History History stores web pages browsed by the user. It is stored by a rule of “First in, first out” and there is a maximum. On history list screen, there is a “more” menu at last line. The web pages browsed by the user is displayed in the middle. The left softkey “Option” includes Clear all, Delete and go. If there isn’t any history, then it should popup an info box to prompt “No history available”. Open: Select “Open” to connect to the page. Delete: Delete the selected web page.
be saved in sent box one by one(one for each person). • Unsent Box The unsent SMS or failed sent SMS will be automatically saved in the unsent box. The unsent ones in Group SMS will be saved in unsent box one by one(one for each person). • Favorite The user can remove SMS from Inbox to favorite. The sms in favorite box just only can be stored in the Handset and can’t be stored in SIM card.
display prompt information, such as “2 new SMS”. Then the user can press “OK” to enter inbox sms list. Once the prompt information is removed from the idle screen, the user need to enter “Inbox” to read SMS. Whether a SMS will be saved or not depends on the type of the SMS: • Broadcasting SMS and level 0 SMS will never be saved.
• Inbox • Sentbox • Unsentbox • Favorite • SMS in SIM card • SMS in phone • SMS before a certain date Enter this menu, there are six options: “Delete 1 day ago”, “Delete 3 days ago”, “Delete 10 days ago”, “Delete 1 month ago”, “Delete 3 months ago”, “Delete 6 months ago”. Capacity The user can check the number of the used SMS in SIM card and in phone, total number of SIM card. The SMS number in each box can also be listed.
The broadcasting SMS has the following options: • • Reception • If “activated”, the Handset can receive broadcasting SMS, which will be displayed • If “closed”, then the Handset will not listen in any broadcasting message channel. Channel list: is used to add, modify listen-in channels 5.7.6 MMS In the “MMS” menu, there are nine sub menus: “Write MMS”, “Inbox”, “Outbox”,“Sent Message Box”, “Draft Box” , “Template box” and, “MMS Setting”, “Capacity” , “Exit”.
page. • Next page (only the mms include more than two pages): can view the next page. • Delete page(only the mms include more than two pages): can delete the current page • Preview:The system enters the page preview screen to play the page. The detail please refer to 5.7.6.3. Preview and playing. • Page timing:The system enters the “Time Setting” screen where the user can set the lasting time of a page. • Text color: The user can set the text color of the current page.
Send Send mms immediately. If the user set “auto save” option on, and if sent successfully, save this mms into “sent message box”. If sent unsuccessfully, then save this mms into “outbox”. If the user set “auto save” option off, then don’t save. Save The system will save the MMS body as well as the recipient, the subject, the BCC and the related setting into the “draft box”. If the memory is not enough, the system will prompt: “Memory is insufficient, please clear up first!”.
The first kind is used to show the information of a new edited MMS or a MMS in the draft box, template box, outbox and Sent Message Box. The contents displayed on this screen are: • The title displays “Detailed Info”; • Display “Subject:” and then display the content of the subject. If the width of a text is larger than the allowable width the text will be displayed in the next line. • Display “Recipients” and then display the sending number or e-mail address.
the screen displays the downloading time of the MMS in the format “dd/mm/yyyy”. If the selected MMS has not been read the screen displays nothing. • Display “Priority:” and then is the priority of the MMS. • The bottom line displays the left softkey: “OK”, right softkey is “Back”. 5.7.6.5. Inbox Enter inbox, the mms that the user received before display on the screen. The contents displayed are: • Title: displays “Inbox”. • Middle of the screen: Display the mms list.
• The bottom line displays the left and right softkey functions: the left soft key is “Option” and the right softkey is “Back”. Enter template box, the mms that the user saved as template display on the screen. The contents displayed are: • Title: displays “Template box”. • Middle of the screen: One MMS a line, to the left displays the subject of the listed MMS. Before subject, displays icons to show the mms priority.
“Text only” , and the left softkey is “OK”, and the right softkey is “Back”. ¾ Reply charging deadline: select this item, it will give 3 options: “1 day”, “1 week”, “Max” , and the left softkey is “OK”, and the right softkey is “Back”. ¾ Reply charging size: select this item, it will give 3 options: “1 kb”, “10 kb”, “Max” , and the left softkey is “OK”, and the right softkey is “Back”. Show number Select this menu, the users can choose “Yes” or “No” menu. The default setting is “Yes”.
message”: select these items, it will enter a text edit box, the user can input string in it, and the left softkey is “OK”, and the right softkey is “Back”. ¾ “Treat as delayed”: The users can choose “on” or “off” menu. The default setting is “off”. Network Select this item, system enter the “Network” screen.
the user to carry out complicated information searching and transaction by pressing keys. STK provides SIM card value-added services with a developable environment, that is, a simple and operable development platform. A Handset that supports SIK card can provide additional STK menus, contents of which are read by the Handset from the STK card and can’t be modified by the user. Depending on the type of STK, contents of the menu may vary and may be changed via air interfaces.
selected date (several events may occur in one period of time, if the user create many events in same period of time, then divide several line to display each event title and the period time only display one line and not change. ). For each piece of the list, if there is an event, then the title (the selected line can scroll) will be displayed behind the period of time.
period of time in a certain day, then a sign will be marked on the corresponding period of time (one event may span several periods of time, even date). In addition, Weekly view displays which week it is and the selected date. The user can press Left/Right key to translate to previous/next day (If it is the first day, pressing Left key will skip to last week. If it is the last day, pressing Right key will skip to next week). Pressing Up/Down key can translate to previous/next week.
• New: (same as that of the day view) • Weekly view: enter weekly view. • Delete: delete due/all. • Enter date: the user can check by any date. • Capacity: In Capacity the user is allowed to see the number of saved events and the number of out-of-date events. • Settings: (same as that of the day view) • Exit: Exit from calendar. In monthly view,the right softkey is “weekly view”.
to search after user’s confirmation. If found, the found string will be highlighted. • Search next: Search from the cursor position. 5.8.4 World time World time function helps the user find out the time of major cities in each time zone. There must be at least one major city in each time zone. World time function displays the names and time of two cities simultaneously. One is local city, the other is out-of-town. The user can select the out-of-town city by [Up]/[Down]/[Left]/[Right] key.
• M+: Memory Plus. No matter the user select “Clear” from option, or delete all operands, the editor should display “0”, not null. 5.8.6 Alarm clock This Handset has 24-hour alarm clock function. The clock function can also be activated in power off state. There are three groups of alarm clocks in total, and the user can activate or deactivate alarm clocks.
• Input Bar: Input the word to search in Input area. • Browse area: Display all words with the initial letters the user input. If the user does not input any character in Input area, it will display the word list from the very beginning in Browse area. • [Option](Left softkey): Including Spelling Check(if the user fine Chinese word, this option won’t be display), Page up , Page down. • [ Back] (Right softkey): Spelling Check is available only that the user inputs three or more letters.
During searching, the left softkey is empty, the right softkey is “Stop”. After the search is end, the left softkey is “OK”, the right softkey is “Back”. If the correct word already display, the user can press “C” or right softkey “Stop” to stop searching, and then the right softkey change to “Back”. The user can press Up/Down key to select a word in the list and press”OK”key or left softkey, or double click the word with the touch pen to enter “Browser” screen to see the detailed grammer of this word. 5.9.
Up to 9 group data can be saved,the user also can press number key to view the reserved records. 5.9.6 Count-down timer The Handset provides count-down timer function. The user can set alarm time. when User enter count-down timer, there are two cases:1. if currently the timer is already on, then the left softkey is "Reset" ,user can click it to stop the timer. 2. if currently the timer is off, then the left softkey is "Start", and the focus is on the first number of the input area.
z Title bar: Display the path and the name of the game package or game folder that the user entered. For example, if the user entered a folder or package named “game” under JAVA, then the title will display “Java\game”, if the user entered a folder or a package named “gamepackage1” under folder “game”, then the title will display “Java\game\ gamepackage1”. z Browse area: Display games list or sub game package/folder in this game package. A scroll bar will display if one screen is not enough.
Select this sub menu it will open the edit screen, the user can input new name for this folder. Add new folder Select this sub menu it will add a new folder under the current folder, the default name is newfolder1, 2,3. The user can edit new folder name in the edit box in the bottom of the screen. To be attention, the user just only can create one level folder and can’t create another folder under the folder he created.
5.11 System Configuration 5.12 GUI/MMI 5.12.1 panel 5.12.1.1 Six Sections There are 6 blocks on the panel (6 types): Handset, Messages, Multimedia, Mobile Office, Settings and User define. Preset application program is put into the first five blocks and the downloaded programs and delete-able programs are put into User define. 5.12.2 Handwriting This function includes simple Chinese, Traditional Chinese, English, characters and numbers.
Annex A: C8000 Menu Tree [1] Handset Demo (Only when there is no SIIM card) Phonebook Enter PB mixed list Add new IP dial Modify Delete Send SMS Send name card Speed dial Copy to phone(SIM card) Move to phone(SIM card) Copy and edit Dial Search By surname By keyword By initials Add new number Capacity New entry storage SIM card Phone Delete all SIM card Phone Copy all SIM to phone Phone to SIM Move all SIM to phone Phone to SIM Call 24ard
Group settings IP number Own info Modify own info Delete own info Send own info Display own info Call list Recent Call IP call Send message Delete Save (if the number is not in Phonebook) Call Call meters Last call Last GPRS call Call timers Outgoing call timer Incoming call timer Reset timers Call forward Unconditional Enable Phonebook Voice mail New number Disable Status When busy (the same as “Unconditional”) No reply (the same as “Unconditional”) Not reachable (the same as “Unconditional”) Cancel all St
Off Any key answer On Off Auto redial On Off Auto answer On Off Active flip On Off Call waiting GSM call On Off Status GPRS call On Off Send ID On Off Default Status Security settings PIN code On Off Call barring Roaming calls All incoming calls Local calls only All outgoing calls International calls On Call 24ard
off Inquire Change Code Change PIN Call barring Guard settings Power on protection On Off Change password Network Settings Preferred networks Show preferred Delete preferred Add available Add existing Add network code Attach GPRS Always During PDP session Register again In-flight mode On Off [2] Messages SMS Write message Option Send now Save Save as user defined Namelist Send&Save Insert user defined Inbox SMS list Call 24ard
Option Reply Forward Delete Save to favorites Store number Dial Sent box SMS list Option Send Forward Delete Unsent box SMS list Option Send Forward Delete Favorites box SMS list Option Reply Forward Delete Save to favorites Store number Dial Settings Service center Input number Validity period 12 hours 1 day 1 week Maximum Status report On Call 24ard
Off Reply path On Off New entry storage SIM card(Default) Mobile phone User define sms Add Send Modify Delete Delete SMS Delete all Inbox Sent box Unsent box Favorite SMS in SIM card SMS in phone Delete 1 day before Delete 3 days before Delete 10 days before Delete 1 month before Delete 3 months before Delete 6 months before Capacity Voice mail Call voice mail Voice mail number Broadcast SMS Reception On Off Channel list MMS Write MMS Add text Call 24ard
Edit text(if alread add text) Insert picture Insert audio Insert new page previous page (If the user insert multi pages) Next page (If the user insert multi pages) Delete page (If the user insert multi pages) Preview Page timing Text color Text color,all page Background color Remove objects Inbox Inbox list Options View Reply Reply to all Forward Delete Delete all Refresh Detailed info Back Sent Message Box Outbox list Options View Delete:.
Option View Delete: Delete all: Edit Send now Refresh Detailed Info: Back: Back Draft box Draft box list Option View Edit message Delete Delete all Send now Refresh Detailed info Back Template box Template box list Option View Create message from Template Delete Delete all Refresh Detailed info Back MMS settings MMS Center Sending Validity period 1 hours 12 hours Call 24ard
1 day 1week Max Read report On Off Delivery report On Off Priority Low Middle High Reply charging Reply charging Reply charging deadline Reply charging size Show number On Off Auto save On Off Page timing Delivery time Immediate In one hour In 12 hours In 24 hours Retrieval Home network Roaming network Send read report Delivery report allowed Filters Immediate server Immediate limit Treat as delayed Call 24ard
Max retrieval size Anonymous senders Personal message Advertisement message Informational message Auto message String message Network Connection type Network account WAP gateway Login Password Realm Secure port HTTP port Capacity WAP Profiles list Add Delete Edit Connect/Release WEB Option Forward Backward Homepage Refresh Bookmarks Add Bookmarks Edit Go Delete Delete all History Go Delete Call 24ard
Clear all Settings Edit homepage Select Profile rename Profile Connection Data account Connection Type Timeout Proxy address Proxy port Sec.
Offline pages Quit STK (The menu can be available only with the SIM which has STK function for GSM service.) [3]Multimedia DC Option Meter mode Single(default) Continuous Self-timer 10 sec White balance Auto(default) Sunny Cloudy Incandescent Fluorescent Image quality Normal Fine(default) Super fine Image size 1280*1024 640*480 320*240(default) 160*120 Photo effect Off(default) Neutral Vivid Sepia Cold Reversal B&W Exp.
Night mode On Off Storage location SD card Phone(default) Display On(default) Off DV Option White balance Auto(default) Sunny Cloudy Incandescent Fluorescent Image size 320*240(default) 160*120 Photo effect Off(default) Neutral Vivid Sepia Cold Reversal B&W MMS mode On Off(default) Exp.
On(default) Off Record Option Audio player Record again Storage location Send via MMS Tag-It Option Undo Redo Copy Cut Paste New Open Send MMS Save Save as Cancel edit Back Image browser Option(For a single picture) Browse Delete Edit Send via MMS Detailed info Rename Add frame effect Option(in browser screen) Zoom (Only in picture display screen) Zoom in Zoom out Call 24ard
Fit in Original size Set as wallpaper Delete Edit Send via MMS Detailed info Add frame effect Audio player Option Play Delete Send mms Detailed info Rename Flip exit Video player Option Play Delete Select all Send bt MMS Detailed info Rename Flip exit On Off [4] Mobile office Calendar & Schedule Day view Option New Monthly view Weekly view Delete Selected event Call 24ard
Due event All events Input date Capacity Settings: Default view Monthly view Weekly view Daily view Weekly type Monday Sunday Week view Option New Daily view Month view Delete Due event All events Enter date Capacity Settings: Default view Weekly type Exit Month view Option New Daily view Week view Delete Due event All events Enter date Capacity Settings: Default view Call 24ard
Weekly type Exit Notepad Option (Notepad list) New Open Rename Delete Detailed info Back Option (create or open a file) New Save Save as Delete Search Search next Chinese-English 2-way Dictionary Enter Option Spelling check-up Page up Page down View explain word Option Last word Next word exit Exit Calculator Option CE MC MR MS M+ Alarm clock Clock one Time Call 24ard
Repeat method Once Everyday On weekday Except Sunday Close Clock two Clock two Ring type World time Option Set as local Daylight saving Stopwatch Start Exit Count-down timer Start/Reset Sync [5] Settings Sounds settings Ringr type Ringer list Ring volume & alert Volume Alert type Ringe Vibrate Light Message alert Volume Alert type Ringe Vibrate Call 24ard
Ringer setting Alarm clock Volume Alert type Ring Vibrate Ringer setting Calendar alert Volume Alert type Ring Vibrate Ringer setting Key tone On Off Touch panel tone On Off Power on/off tone On Off Battery alert On Off Interface Settings Idle screen type Digital Analogue Monthly view World time Wallpaper Option Preview Icon view List view Set as wallpaper Idle screen content Call 24ard
Time Week Chinese calendar Wallpaper Year and month Screen theme Theme list Set (OK key) Preview Phone settings Language English Simplified Chinese(简体中文) Traditional Chinese (繁体中文) Input method T9 Simple Chin. Pinyin On Off T9 Simple Chin.strokes On Off T9 Traditional Chin. Zhuyin) T9 Traditional Chin.
On/Off Time Brightness LCD sleep interval 10 seconds 30 seconds 1 minute 3 minutes 5 minutes 10 minutes Quick Settings Normal Enable Personalize Here are same with sounds settings except “Ringr type” Change name Silent Meeting Outdoor Car Clock settings Hotkey settings Keystroke list(Key2-9) Function list Touch panel adjust Resource manager File management Open Cut Copy Paste Delete Uoward Select all Program management Factory settings Call 24ard
[6] User define JAVA manager Games Call 24ard