Wi-Fi Display User’s Manual
Contents 1. Package Contents ------------------------------------------------------------------------------3 2. Before you start ------------------------------------------------------------------------------4 3. Quick Start ------------------------------------------------------------------------------7 4. Using MirrorOp Sender for win-OS ------------------------------------------------------------------------------9 5.
Wi-Fi Display User’s Manual 1.
Wi-Fi Display User’s Manual 2. Before you start Wi-Fi Display is the one device that can show all contents of your Windows® or Mac® computers on your TV wirelessly. You can easily control computers with your mouse and/or keyboard. You can share any content from your computers with your friends and family in your living room. Also, if your mobile phone or pad is Android OS with a built-in DLNA function, you can push the picture, music and audio from Android mobile devices to HDTV for sharing a big screen.
Wi-Fi Display User’s Manual c) Purely wireless Connection: Basic performance for Windows or Mac computer You can also try setting up Wi-Fi Display as a wireless client to your home AP via AP-Client mode. However, this setup is more complicated and vulnerable to any interference in Wi-Fi signal.
Wi-Fi Display User’s Manual e) Wi-Fi Router Function Let Wire Router become Wi-Fi Router and mobile Wi-Fi devices can access into Internet by Wi-Fi, such as personal notebook, mobile phone,etc.
Wi-Fi Display User’s Manual 3. Quick Start 1. Connect the HDMI output on the Wi-Fi Display to your TV, and turn on your TV. Connect the power adapter to your Wi-Fi Display, and plug in to your power outlet. Press the Power button on Wi-Fi Display to turn on the device. Wi-Fi Display will be powered ON. Waiting for about 35 seconds,the Main Menu as below will be shown on your TV screen while system is ready. 2. 3. 4. 5.
Wi-Fi Display User’s Manual 8. 9. Connect to selected access point. Connect to MirrorOp server. If only one server is found, it will automatically connect to the server. 10. The application will ask to adjust your PC resolution for best projection result, and then project your screen to TV. You should see your PC Desktop on TV screen now. 11. To finish projection, click the X button on the menu of MirrorOp Sender to leave projection.
Wi-Fi Display User’s Manual 4. Using MirrorOp Sender for Win-OS 4.1 Start Program After installing the program, you will see the MirrorOp icon on your desktop: 1) Double click it to execute MirrorOp Sender client. 2) Program start to list all available Access Point List.(Auto Wi-Fi connect enabled) 3) Program start to search all available MirrorOP devices. 4) After MirrorOP device is found, click it to start projection.
Wi-Fi Display User’s Manual 4.2 Main User interface Menu Area App/Video mode Play/Stop button 4.3 Screen Projection Click the button for full or split screen; you can project the main screen on to the display immediately. Video Mode vs. App Mode On MirrorOp Sender you can find a switch button for two modes: Video Mode and App Mode; Video Mode is designed for smooth video experiences, so by default it has longer latency between your PC and TV.
Wi-Fi Display User’s Manual button Description Full Screen Projection Video Projection Application Projection 4.4 Menu Description Exit Menu 4.4.1 Remote Box Management Click to initial web management.
Wi-Fi Display User’s Manual 4.4.2 Search Remote Box Click to connect to another MirrorOp. The last MirrorOp you connected is remembered. To connect another one, please click . 4.4.3 Projection Quality Adjust projection image quality in . Higher quality requires higher bandwidth. Default is Normal.
Wi-Fi Display User’s Manual 4.4.4 Remote Cursor Size Adjust the cursor size on projection screen. When you select 3X option, that will adjust the cursor to big size. The default is 2X. 4.4.5 TV Offset Compensation Most TVs has overscan design which will cut the edges of the Desktop. If you cannot turn off overscan from your TV OSD, please use the to shrink projected screen to fit your TV.
Wi-Fi Display User’s Manual Drag the sliders to set offset value. Click to update TV projection. Check the TV screen. When the Desktop fits the TV, click . 4.4.6 Auto Power Management To make the highest projection performance, application will turn the PC’s windows power scheme from current settings to “highest performance”, however, you can click the “Auto Power Manage” to enable or disable this function and restore you power scheme immediately.
Wi-Fi Display User’s Manual 4.4.7 Auto Wi-Fi Connect Check to let MirrorOp search and connect to access points, or turn it off to use your original Wi-Fi manager to connect to access points manually. 4.4.8 Advanced Screen Capture Click the , you will be able to windows and other layered windows (include the main UI) connected However, the mouse cursor may blink from time to time when projecting your PC screen! z Disable “Advanced Screen Capture”.
Wi-Fi Display User’s Manual s Tip windows is shown in projector。 4.4.9 Activate This Sender Software To activate, select from the menu. In the Activation dialog, input the activation key printed on the CD envelops or received by mail. (The fifth field will be auto filled and please ignore it if this field is different from your key.) Click “Activate now” to activate online.
Wi-Fi Display User’s Manual The software will connect to the activation server to validate the information. When validation is passed, your software will be activated. 4.4.10 Check for updates Click to check for updates.
Wi-Fi Display User’s Manual 4.4.11 About Click to show system information. It includes product model name, Client version, IP address and other information 4.4.12 Exit Click to exit this application. It will stop current playing status and close the application immediate.
Wi-Fi Display User’s Manual 5. Using MirrorOp Sender for MAC-OS Note: For MAC-OS, you must purchase software and additional activation key. http://www.mirrorop.com/product_Mac_Sender.html 5.1 Start Program After installing the program (*.pkg file), you will see the MirrorOp icon on your dock: 1) Clicking it to execute MirrorOp Sender client. 2) Program start to list all available Access Point List.(Auto Wi-Fi connect enabled) 3) Program start to search all available MirrorOp devices.
Wi-Fi Display User’s Manual 5.2 Main User interface Menu Area App/Video mode Play/Stop button 5.3 Screen Projection Click the button for full or split screen, you can project the main screen on to the display immediately. Video Mode vs. App Mode On MirrorOp Sender you can find a switch button for two modes: Video Mode and App Mode. Video Mode is designed for smooth video experiences, so by default it has longer latency between your PC and TV.
Wi-Fi Display User’s Manual button Description Full Screen Projection Video Projection Application Projection 5.4 Menu Description Exit Menu 5.4.1Search Remote Box Click to connect to another MirrorOp.
Wi-Fi Display User’s Manual The last MirrorOp you connected is remembered. To connect to another one, Click . 5.4.2Remote Cursor Size Adjust the cursor size on projection screen. When you select 3X option, that will adjust the cursor to big size. The default is 2X. 5.4.3Projection Quality Adjust projection image quality in . Higher quality requires higher bandwidth. Default is Normal.
Wi-Fi Display User’s Manual 5.4.4TV Offset Compensation Most TVs has overscan design which will cut the edges of the Desktop. If you cannot turn off overscan from your TV OSD, please use the to shrink projected screen to fit your TV. Drag the sliders to set offset value. Click to update TV projection. Check the TV screen. When the Desktop fits the TV, click . 5.4.
Wi-Fi Display User’s Manual 5.4.6Activate This Sender Software To activate, select “Activate This Sender Software” from the menu. In the Activation dialog, input the activation key printed on the CD envelops or received by mail. (The fifth field will be auto filled and please ignore it if this field is different from your key.) Click “Activate now” to activate online.
Wi-Fi Display User’s Manual The software will connect to the activation server to validate the information. When validation is passed, your software will be activated. . 5.4.7About Click to show system information.
Wi-Fi Display User’s Manual 5.4.8Exit Click to exit this application. It will stop current playing status and close the application immediate. 5.4.9Main Menu Bar The menu bar in Top left-hand corner, and click button. Click to show version information of this program.
Wi-Fi Display User’s Manual Click to check for updates.
Wi-Fi Display User’s Manual 6 Web Management Home Page ♦ Make sure your PC is connected to MirrorOp device successfully. ♦ Open your browser, and enter the IP address of your MirrorOp device. Login Web Admin ♦ ♦ Click [Admin] and then enter password to login web page. Default password is “admin”.
Wi-Fi Display User’s Manual System Status *** Click [System Status] to show current system status. Model Name: Product model name Versions: ♦ Firmware version: Product firmware version number. Network Status: ♦ IP address: IP address of MirrorOp device.
Wi-Fi Display User’s Manual Network Setup < IP Setup> You can select “obtain IP address automatically” or “Use the following IP address” ♦ IP Address: The default value is 192.168.100.10. ♦ Subnet Mask: The default value is 255.255.255.0 ♦ Default Gateway: The default value is 192.168.100.10 You can select “Auto” or “Disable”. When “Auto” is selected, it will automatically disable DHCP on MirrorOp is another DHCP server is detected, otherwise it will enable its DHCP service.
Wi-Fi Display User’s Manual ♦ ♦ ♦ ♦ ♦ SSID: SSID string, max. Length is 32 bytes. SSID Broadcast: you can select “Enable” or “Disable” Channel: to set fixed channel or Auto. Security: Disable/WEP/WPA/WPA2 Key: Security key of your choice. < AP Client> ♦ Connect to existing AP: Type in the Home AP SSID you want to connect. ♦ Encryption: Disable/WEP/WPA/WPA2 ♦ Key: Type the Home AP’s security key. : press button to select this mode : press button to abort action.
Wi-Fi Display User’s Manual Reset to Default *** Click [Reset to Default] button to restore factory default settings. : Confirmation and action. Firmware Update *** Click [Firmware Update] button to upgrade firmware. ♦ Firstly, you have to get latest firmware image file from your vendor. ♦ Click to specify file name you want to upgrade. ♦ Click to start. The upgrade process takes about 5 minutes to complete.
Wi-Fi Display User’s Manual Reboot System *** Click [Reboot System] button to restart system : reboot system automatically. Logout *** Click [Logout] button to return to home page.
Wi-FiDisplay User’s Manual 7 Using DLNA Function via Wi-Fi Display 7-1 What is the support on Wi-Fi Display for DLNA function? Wi-Fi Display is the one of DMR (Digital Media Renderer) can play media contents which are streamed by DMC (Digital Media Player) from DMS (Digital Media Server).
Wi-FiDisplay User’s Manual c. Click “Turn on media streaming” button. d. Select “All networks” from “Show device on:” and make sure “MirrorOp: DMR” is selected as “Allowed” then click OK button to finish setting. After finished setup, you can stream media content to DMR device direct.
Wi-FiDisplay User’s Manual e. Video streaming: Go to Video Library then right-click on video file you want to stream. Then select MirrorOp DMR device from menu list of Play to. After that, the video is streamed on your TV which connected with your MirrorOp device.
Wi-FiDisplay User’s Manual f. Photo streaming: Go to Picture Library then right-click on photo file you want to stream. Then select MirrorOp DMR device from menu list of Play to. After that, the photo is streamed on your TV which connected with your MirrorOp device. g. Music streaming: Go to Music Library then right-click on photo file you want to stream. Then select MirrorOp DMR device from menu list of Play to. After that, the music is streamed on your TV which connected with your MirrorOp device.
Wi-FiDisplay User’s Manual RF Exposure Statement To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Wi-FiDisplay User’s Manual 8 System requirements Mac PC Requirements CPU Grade Graphics Operating System Recommended Models Intel Dual Core 1.4 GHz or better (PowerPC not supported) nVIDIA or ATI graphic card with 64MB VRAM or above Mac OS X 10.5+ MacBook after 2009-01-21 All series of MacBook Pro MacBook Air after 2010-06-08 All Mac Desktops that meet the above hardware requirements Windows PC Requirements CPU Grade Display Adaptor Operating System WiFi Dual Core 1.
