Technical Specs

ManualsBrandsCDVI WIRELESS ManualsElectronicsEncoded radio keypad

WIRELESS KEYPAD 050551

INTRODUCTION ........................................2

Main Features.............................................2

Packaging inventory

...................................2

Technical specications

..............................3

UNTING DIAGRAM ..............................3

OWER SUPPLY .......................................4

TTERY

Battery low

..................................................4

Accessing the battery

.................................4

Extra battery ...............................................4

PROGRAMMING..................................... 5

Master Password ..................................... 5

Create Access code .................................. 5

Changing the security code ...................... 6

Deleting a single access code.................. 7

Erasing all access codes.......................... 7

Changing Master password ...................... 7

Set Master password back to

factory defaults ......................................... 7

Temporary access codes ........................ 8

Night Light ON / OFF programming........... 8

WARRANTY ............................................. 8

TABLE OF CONTENTS

Create Communication with Receiver ...... 5

Compatible with all USAutomatic receivers

Part # 030200, 030205 and 030207

Summary of content (8 pages)

PAGE 1
WIRELESS KEYPAD 050551 Compatible with all USAutomatic receivers Part # 030200, 030205 and 030207 TABLE OF CONTENTS Introduction.........................................2 Main Features.............................................2 Packaging inventory....................................2 Technical specifications...............................3 PROGRAMMInG..................................... 5 Master Password ..................................... 5 Create Access code ..................................
PAGE 2
1 Introduction The Wireless Keypad 050551 is a radio keypad operating at 433.92 MHz. The radio transmission is enabled only after entering a valid access code. The internal memory can store up to 256 different access codes, 256 temporary codes and 1 Master code. This keypad has 4 unique transmitting channels controlling up to 4 different receiver channels.
PAGE 3
Technical specifications Number of keys....................................12 Number of channels. ............................4 Supply...................................................Battery 3 Vdc or Wired 12/24 AC/DC Battery duration. ...................................about 24 months - using one battery Battery type. .............................. ...........Lithium CR123A Current consumption battery.................Less than 200 μA with night light ON Current consumption wired........:..........
PAGE 4
3 Power supply The keypad can be powered externally with 12/24 Vac/dc, selecting the power mode with the jumper J1. J1 J1 Fig. 3 J1 = On : Battery cR123A 4 Fig. 4 J1 = OFF: 12/24 Vac/dc Battery Battery Low The limit is about 2.7V. Battery-low status is indicated by the backlit keys blinking. Accessing the battery To access the battery, remove keypad from back plate, then remove the 4xM3 screws that hold the internal cover to the front panel. Internal cover Fig.
PAGE 5
Programming Terms to Understand Access Code – Is the 5 digit code entered on the keypad to operate the gate. Option available is to create a code containing less than 5 numbers and use the # sign as the last key in the code. Example code "5#" or "1234#" the # is part of the access code. ACCESS CODE CAN NOT BE THE SAME AS THE MASTER PASSWORD. Master Password – The 5-digit code used to access programming features. Factory default is “11111”. This should be changed for security reasons.
PAGE 6
Keypad Dipswitches -This keypad has virtual dipswitches The virtual dipswitch contains nine 3-position switches. The default Security Code has all nine switches in the center position. To ensure neighboring keypads do not interfere with each other, the virtual switches should be positioned in a random pattern, using the following procedure.
PAGE 7
Deleting a single access code • • • • • • Enter the Master Password. Enter “7”. If correct, 2 short beeps (if 1 long beep is heard, start over with first step) Enter the Access Code to be deleted. Enter “7”. Reenter the Access Code to be deleted. Enter “7”. If correct, 2 short beeps (if 1 long beep is heard, start over with first step) Erasing all access codes • • • • • • Enter the Master Password. Enter “7”.
PAGE 8
temporary Access code Temporary access code may be set for a 1 time activation or up to 9 activations. The procedure to insert it is: • • • • • • • • Enter the current Master Password Enter ‘9’ 2 short beeps Enter the temporary code Enter ‘9’ Re enter the temporary code Enter ‘#’ Enter number of possible activations (‘1’ .. ‘9’) Enter the channel to be activated (‘1’ .. ‘4’) Night Light The keypad night light provides a low level of lighting to assist in locating the keypad in the dark.