User's Manual

ManualsBrandsCDVI WIRELESS ManualsElectronicsTRANSMITTER MODEL ERONE 024A

Table Of Contents

RCS - 433LS

1A - General information

The radiocontrol RCS-433LS has been designed for the control of automatic

closing systems and anti-burglar systems thanks to its very high security

coding system. (KeeLoq ® Hopping code). The code sent by the transmitter

changes at each activation, avoiding any scanning and copying risk.

A special algorithm allows to keep synchronysed transmitter and receiver.

The operating frequency is 433,92 MHz.

The receiver which makes the activation, once received the transmitter

code, has to be connected during the installation to the device to control

CONTENTS

1A - General information

1B - Technical specifications

1C - Main features

1 - TRANSMITTER INTRODUCTION

2 - CODING

3 - MEMORIZATION

4 - BATTERY ACCESS

5 - TROUBLESHOOTING

TIN

STARTED

1B - Technical specifications

Number of keys: 2 / 4

Supply : 1 Alkaline Battery 12V type 23A

Battery life: 12 - 18 months

Current consumption : 25 mA

Operating frequency : 433.92 MHz

Code combinations : 2

Modulation : AM / ASK

Rated e.r.p. : 50 - 100 µW

Range in free space: 60 - 120 yd

Operating temperature: -20 ÷ +55 °C

Overall dimensions: 3.26 x 1.88 x 0.62 in

Weight: 20 gr.

( gate, garage door, rolling shutters, sun-blinds, anti-burglar appliances,

lighting ). All the receivers of the range RCS-433S can store into the

EEPROM a serial number, a manufacturer key and a synchronism algorithm

of more transmitters.

Each transmitter ( or its different keys ) can be stored into different receivers

and hence can do more functions.

In order to use the unused keys of the transmitter it is enough to connect the

dedicated receiver to the mechanism to drive ( i.e. electrolock of a

pedestrian gate, a buzzer, etc. ).

The product fully complies with the European Directives 99/5/CE,

89/336/CEE, 73/23/CEE and with the Part 15 of FCC Regulations.

1C - Main features

Push-button

Red

LED

Thank you for choosing a RCS product. You are recommended to

read this manual carefully before installing the product.

RCS

Push-button

Battery

door

Key holder

ring

Stand alone

RCS-433LS2

RCS-433LS4

Summary of content (4 pages)

PAGE 1
RCS - 433LS G N TI ED ET RT G TA S Stand alone RCS-433LS2 RCS-433LS4 RCS Thank you for choosing a RCS product. You are recommended to read this manual carefully before installing the product. CONTENTS 1 - TRANSMITTER INTRODUCTION 1A - General information 1B - Technical specifications 1C - Main features 2 - CODING 3 - MEMORIZATION 4 - BATTERY ACCESS ( gate, garage door, rolling shutters, sun-blinds, anti-burglar appliances, lighting ).
PAGE 2
- CODING Each transmitter is manufactured and sold with a different univocal serial number set-in-factory. The real transmitted code is the result of a special algorithm which combines a serial number, a manufacturer key and a synchronization number. 3 - MEMORIZATION The transmitter security code has to be stored onto the receiver or the receivers memory available.
PAGE 3
RCS - 433LT G N TI ED ET RT G TA S RCS RCS-433LT2 RCS-433LT4 Thank you for choosing a RCS product. You are recommended to read this manual carefully before installing the product. CONTENTS 1 - TRANSMITTER INTRODUCTION 1A - General information 1B - Technical specifications 1C - Main features 2 - CODING allows to keep synchronyzed transmitter and receiver. The operating frequency is 433,92 MHz.
PAGE 4
2 - CODING Each transmitter is manufactured and sold with a different univocal serial number set-in-factory. The real transmitted code is the result of a special algorithm which combines a serial number, a manufacturer key and a synchronization number. 3 - MEMORIZATION The transmitter security code has to be stored onto the receiver or the receivers memory available.