Product Info

29650
EQUIPMENT APPROVAL INFORMATION
Your telephone equipment is approved to the Public Switched Telephone
Network and is in compliance with parts 15 and 68, FCC Rules and
Regulations and the Technical Requirements for Telephone Terminal
Equipment published by ACTA.
1. Notification to the Local Telephone Company
On the bottom of this equipment is a label that contains, among other
information, a product identifier in the form US:AAAEQ##TXXXX. You
must, upon request, provide this information to your telephone
company.
The digits represented by ## in the product identifier indicate the
Ringer Equivalency Number (REN) for this equipment. The REN is
useful in determining the number of devices you may connect to your
telephone line and still have all of these devices ring when your
telephone number is called. In most (but not all) areas, the sum of the
RENs of all devices connected to one line should not exceed 5. To be
certain of the number of devices you may connect to your line as
determined by the REN, contact your local telephone company.
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA. A compliant telephone
cord and modular plug is provided with this product. It is designed to
be connected to a compatible modular jack that is also compliant.
See installation instructions for details.
Notes
♦ This equipment may not be used on coin service provided by
the telephone company.
♦ Party lines are subject to state tariffs, and therefore, you may
not be able to use your own telephone equipment if you are
on a party line. Check with your local telephone company.
♦ Notice must be given to the telephone company upon
permanent disconnection of your telephone from your line.
♦ If your home has specially wired alarm equipment connected
to the telephone line, ensure the installation of this product
does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult
your telephone company or a qualified installer.
2. Rights of the Telephone Company
Should your equipment cause trouble on your line which may harm
the telephone network, the telephone company shall, where
practicable, notify you that temporary discontinuance of service may
be required. Where prior notice is not practicable and the
circumstances warrant such action, the telephone company may
temporarily discontinue service immediately. In case of such
temporary discontinuance, the telephone company must: (1) promptly
notify you of such temporary discontinuance; (2) afford you the
opportunity to correct the situation; and (3) inform you of your right to
bring a complaint to the Commission pursuant to procedures set forth
in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may take changes in its communications facilities,
equipment, operations or procedures where such action is required in the
operation of its business and not inconsistent with FCC Rules and
Regulations. If these changes are expected to affect the use of
performance of your telephone equipment, the telephone company must
give you adequate notice, in writing, to allow you to maintain uninterrupted
service.
Your Caller ID phone enables you to:
‧ Identify callers before you answer the phone.
‧ Record up to 48 Caller ID messages sequentially.
‧ Know the caller number while you were away.
To get the most from your new phone, we suggest that you take a few
minutes right now to read through this user's guide.
HEARING AID COMPATIBLITY (HAC)
This telephone system meets FCC standards for Hearing Aid Compatibility.
US NUMBER LOCATED ON THE CABINET
REN NUMBER IS LOCATED ON THE CABINET
INTERFERENCE INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference; and (2) This device must accept any interference received,
including interference that may cause undesired operation.
interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
♦ Reorient or relocate the receiving antenna (that is, the antenna for
radio or television that is “receiving” the interference).
♦ Reorient or relocate the increase the separation between the
telecommunications equipment and receiving antenna.
♦ Connect the telecommunications equipment into an outlet on a
circuit different from that to which the receiving antenna is
connected.
If these measures do not eliminate the interference, please consult your
dealer or an experienced radio/television technician for additional
suggestions. Also, the Federal Communications Commission has prepared
a helpful booklet, “How To Identify and Resolve Radio/TV Interference
Problems.” This booklet is available from the U.S. Government Printing
Office, Washington, D.C. 20402. Please specify stock number
004-000-00345-4 when ordering copies.
INTRODUCTION
Your Caller ID phone stores and displays specific information, provided by
your local telephone company, to subscribers of Caller ID or similar caller
identification services. You must subscribe to one of these services in
order to use this unit.
IMPORTANT: In order to use this unit, you must subscribe to
either the standard Name/Number Caller ID Service.
IMPORTANT: Because cordless phones operate on electricity,
you should have at least one phone in your home that isn’t
cordless, in case the power in your home goes out.
THE LIGHTNING FLASH CAUTION: TO REDUCE THE RISK OF THE EXCLAMATION
AND ARROW HEAD ELECTRIC SHOCK, DO NOT REMOVE POINT WITHIN THE
WITHIN THE TRIANGLE COVER (OR BACK). NO USER TRIANGLE IS A
IS A WARNING SIGN SERVICEABLE PARTS INSIDE. REFER WARNING SIGN
ALERTING YOU OF SERVICING TO QUALIFIED SERVICE ALERTING YOU OF
“DANGEROUS PERSONNEL IMPORTANT
VOLTAGE” INSIDE THE INSTRUCTIONS
PRODUCT. ACCOMPANYING THE
PRODUCT.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
BEFORE YOU BEGIN
PARTS CHECKLIST
Make sure your package includes the items:-
1. Base Unit
2. Handset Coiled Cord
3. Corded Handset
4. Cordless Handset
5. Handset Battery
6. Telephone Line Cord
7. AC Power Supply
8. Cordless Handset Charger
MODULAR JACK REQUIREMENTS
You need an USOC Jack RJ11C/BABT 431A type modular phone jack type
modular phone jack, which is the most common type of phone jack. If you
don’t have a modular jack, call your local phone company to find out how
to get one installed.
INSTALLATION NOTE: Some cordless telephones operate at frequencies
that may cause interference to nearby TVs microwave ovens, and VCRs.
To minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV, microwave ovens,
or VCR. If such interference continues, move the cordless telephone
farther away from these appliances.
DIGITAL SECURITY SYSTEM
Your cordless phone uses a security system to provide protection against
false ringing, unauthorized access, and charges to your phone line.
INSTALLATION
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment.
DESKTOP INSTALLATION
1. Remove the battery compartment door of handset.
2. Insert battery pack and connect the cord into the jack inside the
handset.
3. Put the compartment door back on.
4. Place the handset in the base.
5. Raise the base antenna.
6. Plug the adaptor to the socket-outlet that near the equipment
and shall be easily accessible and the other end into the power
jack on the back of the base. The IN USE/ CHARGE indicator
comes on indicating that the battery is charging.
7. Allow the phone to charge for 12 hours prior to first use. If you
don't properly charge the phone, battery performance will be
compromised.
8. After charging, plug the telephone line cord into the modular jack
and into the LINE jack on the bottom of the base.
9. Set the RINGER program on the handset to ON, if “免打擾
“ displays on screen. (Please see the details on chapter of
Ringer Setting)
Note: The phone automatically defaults to touch-tone dialing. To
change to pulse (rotary) dialing, see “Tone/Pulse Dialing”. If you
don’t know which type of service you have, check with the phone
company.
CAUTION: Use only the ATLINKS power supply that came with
this unit. Using other power supplies may damage the unit.
NOTE : The phone is shipped in Tone Dialing Mode from the
manufacturer.
DISPLAY ICON OF CORDLESS HANDSET
1. : Talk
2. 00 : Number of incoming calls
3. 頻道 : Channel (Handset)
4. 貴賓 : VIP memory
5.
: Battery level indicator (Handset)
6.
: Low level indicator (Handset)
7. 新來電 : (New)Caller ID record
8. 去電 : Redial record
9. 存儲 : Memory
10. 重復 : Repeated incoming caller ID
11. 免打擾 : Do not Disturb
12. 00:00 : Time (HH:MM)
13. 00－00 : Date (DD:MM)(Handset)
14. 00 月 00 日 : Date (DD:MM)(Base)
15. 密碼鎖 : Number lock (Base)
16. └ : Key display
17. ┘ :
# Key display
KEYPAD AND INDICATOR DESCRIPTION
-ON HANDSET
1. : IP Speed Dial
2.
: - 設置: Program Setting
- 存儲: Memory Store
- 頻道: Channel
3.
: - 對講: Handset intercom with base
- 退出: Exit
4.
: - 刪除: Delete
- 閃斷: Flash
CAUTION: When using telephone equipment, there are basic safety
instructions that should always be followed. Refer to the IMPORTANT
SAFETY INSTRUCTIONS provided with this product and save them for future
reference.
WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
NOTE : For desktop charging only, the handset is only able to charge
WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN