晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Product Specifications & Manual P31ASUS ac2x2+BT5.0 USB2.0 Version: 1.4 Manufacturer CC&C Technologies, Inc.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Revision History Version Date Change Description 1.0 09/23, 2019 Initial release 1.1 10/02,2019 Add power consumption mA 1.2 03/02,2020 Modify Storage Temperature 1.3 12/11,2020 Modify Pin outs 1.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Overview P31ASUS is a WLAN 11ac and Bluetooth combo Module, provides a single USB interface to host, which fully supports the features and functional compliance of IEEE 802.11b/g/n/a/ac standards. Bluetooth v2.1 and v5.0 standards. It supports up to 866.7Mbps high-speed WLAN network connections and Bluetooth protocol stack.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 General Specification Model Name P31ASUS Product Name ac2x2+BT5.0 USB2.0 Standard IEEE 802.11b/g/n/a/ac/ Bluetooth v2.1/v5.0 Data Transfer Rate Modulation Method Frequency Band WLAN: 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS0 to 7 for HT20MHz, MCS0 to 7 for HT40MHz 802.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 5 to 90 % maximum (non-condensing) Humidity Size 25 x 12 x 1.9mm (L x W x H) DC power input Characteristics Module DC input voltage DC power consumption Minimum Typical Maximum Unit 3.135 3.3 3.465 V 1.2 1.5 1.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Pin outs: Pin Signal Input /Output Description WPS Pin(Active High), shared with GPIO3 General Purpose Input/ Output Pin. When this function is not required, external pull-down resistor is required. DC 3.3V 1 WPS Input 2 VDD Power 3 HSDM I/O USB 2.0 Transceiver Differential Pair 4 HSDP I/O USB 2.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 The external circuit for WiFi activity LED display The external circuit for WiFi activity WPS display (When this function is not required, external pull-down resistor is required.
晶訊科技股份有限公司 CC&C Technologies, Inc. Block Diagram 8 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Placement Notice z In order to get a better RF performance, please don’t put any trace or copper plane under Black frame of the module. z RF out Please have the impedance of feed lines to be 50 ohms from RF output pin to Antenna.
晶訊科技股份有限公司 CC&C Technologies, Inc. 50 Ohm Feed line: H1: 20 ~ 60 mil Er1: 4.2 W1: 20 mil W2: 20 mil D1: 5 mil C1: 0.7 mil C2: 0.7 mil T1: 1.4 mil (1 oz) Impedance: 51 ~ 53 Ohm 10 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 PCB Layout footprint The recommended layout pads for P31ASUS module are shown below. (Module top view) All dimensions are in millimeters. Tolerance: +- 0.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Reference Temperature Reflow Chart Note: 1. If the system PCBA is double side design please reflow the side without this module first. 2. Don’t let the solder machine temperature over 250℃ or follow solder paste vender’s recommended temperature. 3.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 This device complies with Part 15 of the FCC Rules.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 This module is intended for OEM integrator. The OEM integrator is still responsible forthe FCC compliance requirement of the end product, which integrates thismodule.20cm minimum distance has to be able to be maintained between the antenna andthe users for the host this module is integrated into.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 si le numéro d'identification FCC n'est pas visible lorsque le module est installé à l'intérieur d'un autre appareil, l'extérieur de l'appareil dans lequel le module est installé doit également afficher une étiquette faisant référence au module fourni.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 OEM integrator will be responsible for re-evaluating the End Product (including the transmitter) and obtaining a separate FCC authorization.