IEEE 802.11b/g/n NFC Bluetooth Music Receiver BT-378 User Manual VERSION 1.0 © All rights reserved. All trade names are registered trademarks of respective manufacturers listed. This manual may not be copied in any media or form without the written consent of original maker.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District , New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Overview BT‐378 is a class 2 NFC Bluetooth Music Receiver that allows a music player, such as iPhoneTM, AndroidTM smart phone, or MP3 player to stream music to an external Speaker wirelessly. Designed with the CSR BC05 chip solution, it has 3.5” audio jack for external speakers.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District , New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 For non‐NFC ‐enabled smart devices 1. Go to “settings” and make sure Bluetooth is turned on. 2. Follow your device’s normal Bluetooth connection process by searching for devices; once you have found the Bluetooth device labeled NFC BT, you should connect to it. 3. Now any music or audio you play will play through your music system.