Wireless Headset ( Bluetooth ) BT-362 USER’S MANUAL With additional Operation Instruction for Skype using BTW software VERSION 1.
1. INTRODUCTION Thank you for your purchasing of our Wireless Headset device. Bluetooth is a technology, which is very popular in short range wireless communication. It allows wireless connections between Bluetooth devices such as cellular phones, personal digital assistants (PDA), desktop and notebook computers, input-output devices (mouse, keyboards, printers)...etc. There are two Bluetooth classes, which define the range of communication.
1.2 Package Content * Wireless Headset (Bluetooth). * Detachable stereo earpiece with microphone. * USB cable. * User’s manual. * 5VDC power adapter (Optional) 2. HEADSET FEATURES Buttons: Increase Volume (V+). Buttons: Decrease Volume (V-). LED Indicator Play/Talk Button: Answer all, Play music, Pause. On/Off Button: Power on/off, End Call, Stop Music, Pairing. Charging Port Reverse Button: Reverse, Previous Song Title. Forward Button: Forward, Next Song Title. 3.
1. Mobile Mode - Blue LED flash regularly. 2. PC Mode - Red LED flash regularly. 3. Stand-By Mode -Red LED flash in slow pace. 4. Pairing Mode - Blue and Red LED flash interchangeably 5. Charge Mode - Red LED stays solid without blinking. 4. CHARGE BATTERY AND RESET THE HEADSET 4.1 Charge Battery The headset comes with a build-in high capacity battery, please let the battery be fully charged before first time use. * Connect the USB charging cable into the headset charging port (Fig.1).
. Turn On / Off the Headset 5.1 To turn the Headset on On/Off Button: Press and hold it about 1 seconds then release. Both blue and red LED light will flash once. The headset is now turned on and in stand-by mode. The red LED light will blink continuously in stand-by mode. 5.2 To turn the Headset off On/Off Button: press and hold the button for 5 seconds, the headset is turned off after the red LED light quickly flash 3 times.
.1 Pairing Steps: 1. Turn off the unit. 2. Press and hold about 3 seconds to enter pairing mode. 3. Both blue and red LED light will flash during pairing stage. 4. Make the connection by following the instructions of mobile devices. 5. Enter the default code “0000”, when the system requests for password. 6. When pair up with mobile devices, the blue LED light will also blink within regular interval in addition to the red blinking LED signal.
PAIR WITH PC/NOTEBOOK 7.1 Pair with your PC/Notebook Pairing process is required before making connection with either PC or Notebook device. (1) Make sure your PC or Notebook has been installed Bluetooth driver first, double click on the Bluetooth icon at the desktop or the right hand of task bar to enter the setup window “My Bluetooth Center”. (2) Turn on the headset, press and hold on the On/Off Button briefly for about 3 seconds.
(7) Enter the default password “ 0000 ”, and the pairing process is now complete. 7.2 Play music with PC and Notebook Once the pairing process is completed with the PC or Notebook device, you may listen to the audio through audio adapter or PC software such as Window Media player or Real Player. 7.3 Button Functionality and LED Indication Play music, Pause Stop music / Power off Reverse, Previous Song Title. Forward, Next Song Title. Increase Volume (V+). Decrease Volume (V-).
8 ANSWER/END CALLS Once the headset is successfully paired with your mobile phone, you can use the headset to receive calls. Turn the headset on first. it will automatically link with your mobile phone if they were paired before. 8.1 Answer and End a phone call When there is an incoming call, if the headset is turned off, you need to press On/Off button for 1 second to turn on the headset first. When the headset is turned on, the headset will ring. 1. Press the Play/Talk Button to answer a phone call. 2.
simultaneously It is possible to pair the headset with a mobile device and PC/Notebook simultaneously. Simply follow the instruction from this section and you can enjoy this convenient feature in no time. (1) Pair the mobile device Refer to the steps from “Section 5” to complete the pairing for the mobile device. (2) Pair with PC, Notebook, or other devices Refer to the steps from “Section 6” to complete the pairing. 9.2 Play music while keeping mobile device active.
Note: Generally, the music may resume 10 seconds after the call has been terminated. However, depending on the software of the target device, the delaying time may vary and may not resume back to the music. 10. CONNECT WITH SKYPE This headset offers a convenient solution to receive and dial out calls from Skype remotely. The following instructions will take you through the steps to connect with Skype. 1. Section 9.
set up for the first time. 4. Section 9.2, Step 1-3, Skype setup: These setup procedures grant Skype program the proper configuration to utilize BTW software to send audio signal to Mini Stereo Headset instead of PC audio device (default setting). * Need to reestablish these procedures again after reset Skype to work under PC’s default setting.
2. Select “View My Bluetooth services”. 3. Select “My Audio Gateway”.
4. Select “My Audio Gateway”, then select Properties. 5. Make sure to check mark the Startup Automatically option, then press Apply to confirm.
icon. 6.Turn on or reactivate the headset by pressing key continuously until single red LED Be sure to press the light is blinking regularly with slow beat, which indicates the headset is now under pairing mode. 7.Select “Search for devices in range” and allow the computer system to detect your headset. A new device name with a head shape icon will appear on My Bluetooth Place as “Mini Stereo Headset”. 8.Select and Right Click on “Mini Stereo Headset” , then select “Pair Device”.
9.When “Bluetooth PIN Code Request” window comes up, enter the default password “ 0000 ” and press OK. 10.Once the password has been entered, a check mark will appear next to the head shap icon, which is the indication that the “Pairing process” has been completed. Note: When “Paired” appears under the Additional Information column, it is an indication that your headset has been successfully paired with PC .
11.Double click on “Mini Stereo Headset” and switch into a window that has “Headset on Mini Stereo Headset” and “Keyboard on Mini Stereo Headset” icons. 12. Right click on “Keyboard on Mini Stereo Headset” first and select “Connect Device” to activate. TIP: You may see the status of “Keyboard on Mini Stereo Headset” just like figure shown in #12 or like the figure shown on the right.
Stereo Headset” and select “Disable”. Then, repeat step #12 to reestablish connection. 13.Then, press continuously on the key of the headset to activate the “Headset on Mini Stereo Headset” icon. Now, the headset is ready in dialing/receiving position with Skype. Now, the headset is ready in dialing/receiving position with Skype. 10.2 Configure Skype’s settings Few simple modifications need to be done before you can connect this headset with Skype properly.
3.Under Hotkeys tab, select and enable the “Enable global hotkeys” option by placing the check mark. Then, enable both the “Answer call” and “Reject/Hang up call” features by click on the Enable Hotkey tab. 4.Make sure the Hotkey value for “Answer call” is set as “Alt+PgUp”, and “Reject/Hang up call” is set as “Alt+PgDn” in order to work properly.( “Alt+PgUp” and “Alt+PgDn” is the default value of Skype.
5.Under Sound Devices tab, change the default value of Audio In and Audio Out to Bluetooth Audio. (This step only require for Skype version prior version 1.3.0.51. After version 1.3.0.51, the default value under Sound Devices are set as “Windows default device”.
6. Press Save to complete the setup. 10.3 Basic Operation within Skype Mode Now, you are ready to use your Bluetooth headset to work with Skype. As a prerequisite, Skype’s interface MUST remain as the ACTIVE WINDOW when using your headset to control remotely. 1.Press on Play key once to dial out or receive incoming calls. 2.Press on Forward key for 3 seconds or press on Ctrl +Tab keys to switch in between tabs under Skype environment. 3.
4. Press on Play key once to dial out after you entered the numbers at the INPUT Box or by the number pad.
11 F.A.Q Q1. Does the headset work with all types of mobile phones ? Ans : No. It works only with Bluetooth enabled mobile phones. Q2. Why the headset does not work with my mobile phone after the headset is fully charged and turned on ? Ans : You have to activate the Bluetooth function of your mobile phone then pair it with the headset. Q3. What is the working distance between this headset and a Bluetooth mobile phone ? Ans : The basic operating distance of this Bluetooth device is about 10 meters.
headset" or "Unknown Device" on your mobile phone after it is found by your mobile phone. Q5. Why my mobile phone can not find the headset for pairing ? Ans : If the headset is not in pairing mode, then your mobile phone will not find it. Please set the headset into pairing mode, then use your mobile phone to look for it and pair with it. Q6.
Q9. What to do when my headset cannot re-establish connection after being turned off? Ans : Simply redo the pairing procedures to re-establish proper connection. Q10. What to do when the controlling interface is not responding while attached device such as “Dongle” is in use? Ans : Unplug the attached device(s), and plug in again. If these actions do not restore the system back to normal status, try to reboot the system.
12 TROUBLESHOOTING 1.No sound contact between Headset and other devices. * Make sure that the two devices have been paired. * Make sure that the Headset is turned on. * Make sure that the two devices are within a working range. * Make sure that your mobile phone is within signal strength. * Some Bluetooth mobile phones can support only one Bluetooth Headset. * Disconnection may happen when there is more than one Headset paired with our mobile phone. 2.No indication of charging is shown.
13.Product Specification Product Name Model Name Standard Bluetooth Profiles Wireless Headset (Bluetooth) BT-362 Bluetooth v1.2 A/V profile (AADP), AVRCP, Headset and Hands-Free profiles RF Output Power Class 2 Antenna SMD Type Antenna Sensitivity <-80dBm at < 0.1% BER Power 4.
INFORMATION TO USER Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Installation and use of this must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
Your device contains a low power transmitter. When device is transmitted it sends out Radio Frequency (RF) signal. Use only with supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations.
REGULATORY INFORMATION Wireless Headset (Bluetooth) must be installed and used in strict accordance with the manufacturer’s instructions. This device complies with the following radio frequency and safety standards. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
CE Declaration of Conformity For the following equipment: Wireless Headset (Bluetooth) (Product Name) BT-362 (Model Designation) is herewith confirmed to comply with the requirements set out in the Council (European parliament) Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility of Radio and Telecom device (1999/5/EC). For the evaluation regarding this Directive, the following standards were applied: EN 300 328 V1.6.1 (2004-11) EN 301 489-1 V1.4.