Instructions / Assembly

ManualsBrandsCatskill Craftsmen ManualsKitchen Appliance24 in. Fold A Way Butcher Block Table

CRAFTSMEN, INC.

Assembly Instructions

Model 1622

Fold-A-Way Table

GENERAL: Your folding table has been engineered to fit together with a minimum of

effort if you follow the instructions step-by-step. Assembly should take about an hour.

The only tools you need are a medium Phillips screwdriver and a hard hammer. A flat

scrap of wood or plastic will come in handy to protect surfaces when hammering to seat

braces or disks. A power screwdriver will speed assembly, but is not necessary. A little

vegetable oil on the wood screw threads will make it easier to attach the feet to the table

ends/sides.

Read through the instructions completely to familiarize yourself with the various parts

and the progression of the assembly process. Inventory your parts against the parts list. If

anything is missing or damaged, contact us directly for prompt, free parts replacement.

Once your table is assembled, remember that it is made of solid northeastern hardwood

and will need to be cared for as outlined in the enclosed booklet, All About Your Butcher

Block Unit. Your table is designed to open either leaf individually or both leaves. When folded,

the unit takes up only 10 of outward space. Holes in the Table end/sides are hand holes

for easy movement of the 37 lb. unit. Casters are not practical on this unit as it would make

the unit top heavy if elevated on casters.

Summary of content (7 pages)

PAGE 1
C R A F T S M E N, I N C. Assembly Instructions Model 1622 Fold-A-Way Table GENERAL: Your folding table has been engineered to fit together with a minimum of effort if you follow the instructions step-by-step. Assembly should take about an hour. The only tools you need are a medium Phillips screwdriver and a hard hammer. A flat scrap of wood or plastic will come in handy to protect surfaces when hammering to seat braces or disks. A power screwdriver will speed assembly, but is not necessary.
PAGE 2
PARTS LIST (2) Drop Leaves (Identical) (2) Factory Assembled Swing Legs (Identical) (1) Top Support Brace for Main Frame (3 Wide) (1) Bottom Support Brace for Main Frame (2 Wide) (8) 2 Machine Screws (Bolts) for Basic Assembly (8) Nuts for Machine Screws (2) Feet for Main Frame (Identical) (4) 3/4 Steel Pins (4) 1 1/2 Steel Pins (8) 5/8 Wooden Disks Fit in Holes on Table Ends/Sides (Identical) (6) Small Washers for Pivot Pins (2) Table Ends/Sides (Identical) (4) 1 3/4 Long #8 Wood Screws
PAGE 3
STEP 1 Tools needed: medium Phillips screwdriver Hardware needed: (4) wood screws 1 3/4 #8 Parts needed: (2) Table Ends, (2) Feet Preparation: dip screw tips in vegetable oil to ease installation of screws into hardwood.
PAGE 4
STEP 3 Tools needed: Hammer Hardware needed: (4) 3/4 Steel pins (shortest) Parts needed: Frame from step 2, and 2 swing legs (identical) Insert/Tap (2) 3/4 steel pins into the short vertical brace of each factory assembled swing leg as in illustration 3. DO NOT OVERDRIVE PINS! When seated, pins should have 3/8 sticking out of the brace ends.
PAGE 5
STEP 5 Tools needed: Hammer Hardware needed: (4) 1 1/2 Steel pins (longest) Parts needed: (2) Drop Leaves Tap one 1 1/2 long pin into each end of both drop leaves until seated. When seated, pin will stick up about 3/4 out of the wood.
PAGE 6
STEP 7 Tools needed: medium Phillips screwdriver Hardware needed: (4) 2 machine screws (bolts) and (4) nuts Parts needed: Basic assembly plus top support brace Take the top support brace with the 2 pin holes and 4 nut access holes (larger) facing down and align the pin holes with the pins on the top edges of the swing legs. NOTE: These pins do not get washers! If necessary, tap down on the top of the brace to seat the pins.
PAGE 7
012208 For continued beauty and long life of your Catskill Craftsmen cart, we recommend Catskill Craftsmens Butcher Block Oil. If you would like to purchase Butcher Block Oil directly from Catskill Craftsmens factory, we offer a reduced price. For one eight ounce (8 fl. oz.) bottle, which is sufficient for two applications, simply send $5.95 along with the completed coupon to the address below. C R A F T S M E N, I N C.