UENR7061 81 Testing and Adjusting Illustration 42 g03866226 Product Serial Number 4.
82 Testing and Adjusting UENR7061 Note: Enter the hours that are displayed on the service hour meter in the “Engine Units” block. Select “Hours” as the unit. • “Service Tool Serial Number” • “ECM Serial Number” • “Total Tattletale Value” • “Reason Code” Note: The “Rerate” section is not used with the Machine Security System. Do NOT enter information in this section.
UENR7061 Illustration 44 Generated Password 5. Enter all the required information. Then click the “Generate Password” button. The passwords will then be generated.
84 Testing and Adjusting UENR7061 Illustration 45 g03866310 FPS Password Created confirmation screen 6. Record both of the factory passwords.
UENR7061 7. Refer to Illustration 46 . Enter the factory password 1 in the “Factory Password #1” field and enter factory password 2 in the “Factory Password #2” field. Note: Both passwords are required in order to change any of the parameters of the Machine Security System.
86 Testing and Adjusting UENR7061 Illustration 47 g03866252 i06227262 Time - Set SMCS Code: 7631-529 The correct date and time for the Machine Security System must be set. Use the following procedure to set the date and time. Note: Changing the time on the MSS clock requires a key with the master access level or a factory password. 1. Connect the Cat ® ET to the service connector via the communication adapter. Illustration 48 g03866350 2.